Baseus 15W Wireless MagSafe Car Mount Charger Instruction Manual

Produk Selesaiview

The Baseus 15W Wireless MagSafe Car Mount Charger provides a secure and efficient charging solution for compatible smartphones in your vehicle. Featuring a strong magnetic attraction and a flexible design, it offers versatile mounting options and fast wireless charging capabilities for a seamless in-car experience.

Kandungan Pakej

Baseus 15W Wireless MagSafe Car Mount Charger
3M Tape with Hook-and-Loop Fastener (pre-attached to mount)
Metal Ring Sticker (for non-MagSafe compatible phones)
Kabel Pengecas USB-C
Manual Pengguna (dokumen ini)

Panduan Pemasangan

Menyediakan Permukaan Pelekap

Ensure the chosen dashboard or windshield surface is clean and dry. Use an alcohol wipe if necessary and allow it to dry completely before proceeding.

Memasang Gunung

The mount features a non-marking 3M tape with a hook-and-loop fastener on its backing plate. Peel off the protective film from the adhesive.

Press the mount firmly onto the desired clean surface. Apply consistent pressure for at least 30 seconds to ensure strong adhesion. For optimal adhesion and stability, allow the adhesive to cure for 24-48 hours before attaching your phone or applying significant weight.

The bendable memory titanium alloy allows you to contour the mount to your dashboard's shape for a custom and secure fit.

Baseus car mount with 3M VHB Reinforced Tape showing 1.8Kg load-bearing capability — Image: The mount's 1.8Kg load-bearing capability is supported by 3M VHB Reinforced Tape, ensuring stable placement.

Baseus car mount showing various installation scenarios on different car dashboards and windshields — Image: The flexible memory titanium alloy allows the mount to be applicable to various scenarios and car models, adapting to different dashboard shapes.

Baseus car mount with a phone attached, demonstrating its foldable design for different viewsudut-sudut — Image: The foldable design of the mount provides flexibility for achieving different viewing angles, enhancing user convenience.

For Non-MagSafe Compatible Phones

If your phone is not MagSafe compatible, use the provided metal ring sticker. Apply the sticker to the back of your phone or phone case, ensuring it is centered over the wireless charging coil. This will enable magnetic attachment to the car mount.

Arahan Operasi

Melampirkan Telefon Anda

Simply place your MagSafe-compatible smartphone (or phone with the metal ring sticker) onto the magnetic charging pad of the mount. The strong magnets will securely hold your device.

Baseus car mount showing a phone magnetically attached to the charging pad — Image: The strong magnetic connection ensures your phone is securely held in place on the car mount.

Baseus car mount designed for iPhone 15/14/13/12 models, showing magnetic alignment — Image: The mount is designed for improved fit and alignment with iPhone 15, 14, 13, and 12 series charging coils.

Pengecasan Tanpa Wayar

Connect the USB-C charging cable to the car mount and plug the other end into a compatible car charger adapter (not included). The mount supports 15W wireless fast charging.

Charging time from 0% to 100% is approximately 3.5 hours, depending on the phone model and battery capacity.

Baseus car mount showing a phone wirelessly charging with 15W output — Image: The mount provides super-fast 15W wireless output, allowing for quick charging of your device.

Melaraskan Viewsudut

The mount's flexible design allows for 360° adjustment. Rotate your phone to landscape or portrait mode with one hand for optimal viewing without distraction while driving.

Video: Official demonstration of the Baseus for MagSafe Car Mount Charger C02 Pro, highlighting its features and ease of use.

Penjagaan dan Penyelenggaraan

Keep the magnetic charging surface clean and free from dust or debris to ensure efficient charging.
Avoid exposing the mount to extreme temperatures or direct sunlight for prolonged periods.
If the adhesive loses its stickiness, clean the surface and the adhesive pad with water and allow it to air dry. It is reusable after washing.
Jangan cuba membuka atau membaiki peranti sendiri. Hubungi sokongan pelanggan untuk mendapatkan bantuan.

Panduan Penyelesaian Masalah

Telefon Tidak Mengecas

Ensure the USB-C cable is securely connected to both the mount and the car charger adapter.
Verify that your car charger adapter is functioning correctly and provides sufficient power (at least 15W output recommended for fast charging).
Check if your phone is properly aligned on the magnetic charging pad.
If using a non-MagSafe phone, ensure the metal ring sticker is correctly placed and aligned.
Keluarkan sebarang sarung telefon tebal yang mungkin mengganggu pengecasan wayarles.

Mount Not Sticking Securely

Re-clean the mounting surface thoroughly and ensure it is completely dry before re-applying the adhesive.
Apply firm pressure for an extended period (e.g., 30 seconds) during installation.
Allow the adhesive to cure for the recommended 24-48 hours before placing the phone on the mount.
Ensure the surface is flat and smooth for optimal adhesion.

Phone Stability Issues

Ensure the mount is securely attached to the dashboard or windshield.
Verify that the phone is correctly aligned and magnetically attached to the charging pad.
The bendable arm should be adjusted to provide stable support for your phone's weight.

Spesifikasi Produk

Ciri	Perincian
Jenama	Baseus
Nombor Model	B0CHM2WTP7
Output Pengecasan Tanpa Wayar	15W (Maks)
Tarikan Magnet	Sehingga 25N
Jenis Pemasangan	Pelekap Kenderaan (Pelekat)
Ciri Khas	MagSafe Compatible, Bendable Memory Titanium Alloy, 360° Adjustable Design
warna	Kelabu
Berat Barang	11.3 auns
Dimensi Pakej	9.8 x 4.17 x 1.77 inci

Waranti dan Sokongan Pelanggan

Untuk maklumat jaminan atau sokongan teknikal, sila rujuk kepada Baseus rasmi webtapak atau hubungi peruncit anda. Simpan resit pembelian anda untuk tuntutan waranti.

Baseus B0CHM2WTP7