Milex MGS001 Portable Garment Steamer User Manual

1. Pengenalan

Terima kasih kerana membeliasing the Milex MGS001 Portable Garment Steamer. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read these instructions carefully before first use and retain them for future reference.

2. Langkah-langkah Keselamatan

Sentiasa patuhi langkah berjaga-jaga keselamatan asas apabila menggunakan peralatan elektrik untuk mengurangkan risiko kebakaran, renjatan elektrik dan kecederaan diri.

• Jangan rendam tapak pengukus, kord atau palam dalam air atau cecair lain.
• Always unplug the appliance from the electrical outlet before filling or emptying the water tank, and when not in use.
• Gunakan pengukus hanya untuk tujuan yang dimaksudkan seperti yang diterangkan dalam manual ini.
• Jangan kendalikan pengukus dengan kord atau palam yang rosak, atau jika perkakas tidak berfungsi atau telah rosak dalam apa jua cara.
• Jauhkan hos dan muncung stim daripada kanak-kanak dan haiwan peliharaan. Wap panas dan boleh menyebabkan melecur.
• Jangan arahkan wap kepada orang, haiwan atau peralatan elektrik.
• Sentiasa pastikan tangki air berada di tempatnya dengan selamat sebelum beroperasi.
• Use only distilled or demineralized water to prevent mineral buildup and prolong the life of the steamer.

3. Komponen Produk

The Milex MGS001 Portable Garment Steamer includes the following components:

• Steamer Base Unit with Water Tank
• Tiang Teleskopik
• Hos Stim
• Steaming Head
• Clothes Hanger Attachment
• Steaming Head Holder
• Manual Pengguna (dokumen ini)

Image 1: Fully assembled Milex MGS001 Portable Garment Steamer. The image shows the base unit, telescopic pole, steam hose, and steaming head with hanger attachment.

4. Arahan Persediaan

1. Buka Pembungkusan Komponen: Keluarkan semua komponen daripada pembungkusan dengan berhati-hati. Pastikan semua bahagian yang disenaraikan dalam Bahagian 3 ada.
2. Pasang Tiang Teleskopik: Insert the bottom end of the telescopic pole into the designated opening on the steamer base unit. Twist clockwise to secure it firmly. Extend the pole to your desired height by releasing clamps and re-securing them.
3. Attach Steaming Head Holder: Slide the steaming head holder onto the telescopic pole at a convenient height.
4. Sambungkan Hos Wap: Screw the steam hose connector firmly into the steam outlet on the steamer base unit. Ensure it is tightly secured to prevent steam leakage.
5. Attach Steaming Head: Connect the steaming head to the other end of the steam hose. Place the steaming head into its holder on the telescopic pole when not in use.
6. Attach Clothes Hanger: If desired, attach the clothes hanger accessory to the top of the telescopic pole.

Image 2: Close-up of the steamer base unit, showing the water tank and control dial.

Image 3: Close-up of the steaming head with the integrated hanger attachment.

5. Arahan Operasi

1. Isi Tangki Air: Remove the water tank from the base unit. Unscrew the cap and fill the tank with clean, distilled or demineralized water. Do not exceed the maximum fill line. Replace the cap securely and place the water tank back into the base unit.
2. Hidupkan kuasa: Plug the power cord into a suitable electrical outlet (220V, 50Hz). Turn the power dial on the base unit to the 'ON' position. The indicator light will illuminate.
3. Panaskan: The steamer will begin to heat up. This typically takes approximately 35-37 seconds. Steam will start to emit from the steaming head once the operating temperature is reached.
4. Sediakan Pakaian: Hang the garment you wish to steam on the integrated hanger or a separate hanger. Ensure the fabric is taut.
5. Mula Mengukus: Hold the steaming head a few inches away from the fabric. Move the steaming head slowly up and down the garment, allowing the steam to penetrate the fibers. For stubborn wrinkles, you may gently press the steaming head against the fabric.
6. Steaming Delicate Fabrics: For delicate fabrics, maintain a greater distance between the steaming head and the garment. Test on an inconspicuous area first.
7. Selepas Penggunaan: Once steaming is complete, turn the power dial to 'OFF' and unplug the appliance. Allow the steamer to cool down completely before emptying the water tank and storing.

Image 4: A person demonstrating the use of the Milex MGS001 steamer on a garment.

6. Penyelenggaraan dan Penjagaan

Penyelenggaraan tetap memastikan prestasi optimum dan memanjangkan jangka hayat pengukus anda.

• Tangki Air Kosong: After each use, ensure the steamer has cooled down, then remove and empty any remaining water from the tank. This prevents mineral buildup.
• Pembersihan: Lap bahagian luar pengukus dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Descaling (Monthly): If using tap water (not recommended), descale the steamer monthly. Mix equal parts white vinegar and water. Fill the tank with this solution and run the steamer until half the solution is used. Turn off, unplug, and let it sit for 30 minutes. Then run the remaining solution through. Rinse the tank thoroughly with clean water.
• Storan: Store the steamer in a cool, dry place. Ensure the hose is not kinked and the telescopic pole is retracted for compact storage.

7. Penyelesaian masalah

Rujuk jadual di bawah untuk isu biasa dan penyelesaiannya.

8. Spesifikasi Produk

9. Waranti dan Sokongan

For warranty information, please refer to the documentation included with your product packaging or visit the official Milex website. If you encounter any issues not covered in the troubleshooting section, or require further assistance, please contact Milex customer support.

You can often find support contact details on the manufacturer's webtapak atau pada resit pembelian anda.