1. Pengenalan
This manual provides essential instructions for the safe and efficient operation of your Jackery Explorer 1000 Plus Portable Power Station. Please read this manual thoroughly before using the device and retain it for future reference.
The Jackery Explorer 1000 Plus is a versatile portable power station with a 1264Wh capacity and a 2000W rated output (4000W peak). It features advanced LiFePO4 battery cells, offering a 10-year lifespan and 4,000 charge cycles. The unit supports flexible expansion up to 5kWh with additional battery packs and offers multiple charging options including wall, car, and solar.
2. Persediaan dan Pengecasan Awal
2.1 Membuka kotak dan Pemeriksaan
Upon receiving your Jackery Explorer 1000 Plus, carefully unpack all components and inspect for any damage. Ensure all included items are present:
- 1x Jackery Explorer 1000 Plus Portable Power Station
- 1x Kabel Pengecas AC
- Kabel Pengecas Kereta 1x
- 1x Manual Pengguna
- 2x DC7909 to DC8020 Adaptors
2.2 Pengecasan Awal
It is recommended to fully charge the power station before first use. The device can be charged via wall outlet, car charger, or solar panels.
Figure 1: Three primary methods for charging the Jackery Explorer 1000 Plus. The image displays the power station being charged via solar panels, a wall outlet, and a car charger.
2.2.1 Pengecasan Dinding
Connect the AC Charging Cable to the AC input port on the power station and then to a wall outlet. The display will indicate charging status. A full charge from a wall outlet takes approximately 100 minutes.
2.2.2 Mengecas Kereta
Connect the Car Charger Cable to the DC input port on the power station and then to your vehicle's 12V car port. Charging time will vary.
2.2.3 Pengecasan Suria
Connect compatible solar panels (e.g., Jackery SolarSaga 200W) to the DC input ports using the provided adaptors if necessary. Position the solar panels in direct sunlight for optimal charging. The power station can be fully recharged in approximately 2 hours when connecting up to 4 SolarSaga 200W Solar Panels.
Video 1: Demonstrates the process of connecting Jackery SolarSaga 100W solar panels to the Jackery Explorer 1000 Plus for solar charging. It shows connections for one, two, and four solar panels, along with estimated charging durations.
3. Mengendalikan Stesen Janakuasa
3.1 Menghidupkan/Mematikan
Press and hold the main 'POWER' button for a few seconds to turn the unit on or off. The display screen will illuminate upon activation.
3.2 Port Output
The Jackery Explorer 1000 Plus features various output ports:
- Cawangan AC: 2x 120V 2000W Pure Sine Wave outlets. Press the AC button to activate.
- Port USB-A: 2x USB-A 18W Max ports. Press the USB button to activate.
- Port USB-C: 2x USB-C 100W Max ports. Press the USB button to activate.
- Pelabuhan Kereta DC: 1x DC 12V 10A car port. Press the DC button to activate.
Ensure the respective output buttons are pressed to enable power delivery from each port type.
3.3 Skrin Paparan
The integrated display screen provides real-time information:
- Input/Output Wattage: Shows the current power input (charging) and output (discharging) in watts.
- Bateri Percentage: Memaparkan baki aras cas bateri.
- Masa yang tinggal: Estimates the remaining runtime or charging time based on current power draw/input.
- Penunjuk Ralat: Alerts for overload, over-temperature, or other issues.
3.4 Kawalan APP
Manage and monitor your power station remotely using the Jackery APP via WiFi or Bluetooth. The app allows you to:
- Track remaining battery levels.
- Monitor input and output power.
- Customize settings (e.g., charging mode, auto-off time).
- Control light functions.
Figure 2: A user interacting with the Jackery mobile application to monitor and control the power station, showcasing real-time data and customizable settings.
3.5 Bekalan Kuasa Kecemasan (EPS)
The Explorer 1000 Plus features an Emergency Power Supply (EPS) function. When connected to a wall outlet and devices are plugged into the power station, it acts as a pass-through. If grid power fails, the unit automatically switches to battery power within 0.02 seconds, providing continuous power to connected devices.
Figure 3: The Jackery Explorer 1000 Plus operating as an Emergency Power Supply (EPS), providing seamless power during a grid outage with minimal noise.
4. Battery Expansion
The Jackery Explorer 1000 Plus can be expanded to increase its total capacity. It supports up to three additional battery packs, extending the total capacity from 1.25kWh to a mighty 5kWh.
Figure 4: Illustration of the Jackery Explorer 1000 Plus with one and three additional battery packs, demonstrating its expandable capacity up to 5056Wh.
To expand the capacity, connect the expansion battery packs to the designated DC expansion ports on the main unit. Refer to the expansion battery pack's manual for specific connection instructions.
5. Penyelenggaraan dan Penjagaan
To ensure the longevity and optimal performance of your Jackery Explorer 1000 Plus, follow these maintenance guidelines:
- Pengecasan Biasa: For best battery health, fully charge the unit at least once every 3-6 months, even if not in use.
- Storan: Simpan stesen janakuasa di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
- Pembersihan: Gunakan kain kering dan lembut untuk membersihkan bahagian luar unit. Elakkan menggunakan bahan kimia yang keras atau bahan yang melelas.
- Suhu: Operate and store the device within the recommended temperature range specified in the specifications.
- Jangka Hayat Bateri: The LiFePO4 battery cells are designed for a 10-year lifespan with 4,000 charge cycles, maintaining over 80% capacity.
- Mod bersedia: The ultra-long standby mode helps reduce power consumption and extends battery life when not actively in use.
6. Penyelesaian masalah
If you encounter issues with your Jackery Explorer 1000 Plus, refer to the following common troubleshooting steps:
- Unit Tidak Dihidupkan: Ensure the battery is charged. Connect to a power source (wall, solar) and attempt to power on again.
- Tiada Keluaran dari Pelabuhan: Verify that the specific output button (AC, USB, DC) for the desired port is activated. Check the display for any error indicators.
- Perlindungan Lebihan: If an overload indicator appears, disconnect the device(s) drawing excessive power. Reduce the load and restart the power station. The unit has a 2000W rated output and 4000W peak power.
- Over-temperature Warning: If an over-temperature warning appears, disconnect all devices and allow the power station to cool down in a well-ventilated area.
- Isu Ketersambungan Apl: Ensure Bluetooth and/or Wi-Fi are enabled on your mobile device and the power station. Try restarting both the app and the power station.
7. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Jenama | Jackery |
| Nama Model | JE-1000C |
| Kapasiti | 1264Wj |
| Output Dinilai | 2000W |
| Keluaran Puncak | 4000W |
| Jenis Bateri | LiFePO4 |
| Mengitar Kitaran | 4,000 (to 80% capacity) |
| Jangka hayat | 10 Tahun |
| Output AC | 2x 120V, 2000W Pure Sine Wave |
| Keluaran USB-A | 2x 18W Maks |
| Output USB-C | 2x 100W Maks |
| Output Port Kereta DC | 1x 12V 10A |
| Masa Pengecasan Dinding | lebih kurang 100 minit |
| Masa Pengecasan Suria | Approx. 2 hours (with 4*SolarSaga 200W) |
| Keupayaan Pengembangan | Up to 3 additional battery packs (5kWh total) |
| Dimensi (L x W x H) | 10.24" x 11.24" x 14" |
| Berat badan | 32 paun |
8. Waranti dan Sokongan
8.1 Maklumat Waranti
The Jackery Explorer 1000 Plus Portable Power Station comes with a 5-Year Warranty. Please retain your proof of purchase for warranty claims.
8.2 Sokongan Pelanggan
For further assistance, technical support, or warranty inquiries, please visit the official Jackery website or contact their customer service department. Refer to the included User Manual for specific contact details.
