Manual Pengguna Penyejuk CPU ZALMAN CNPS80G Rev.3

1. Pengenalan

The ZALMAN CNPS80G Rev.3 is a compact, low-noise top-flow air CPU cooler designed for efficient heat dissipation. Its small form factor and easy installation make it suitable for various PC builds. This manual provides essential information for proper installation, operation, and maintenance of your CPU cooler.

2. Kandungan Pakej

Sila sahkan bahawa semua komponen yang disenaraikan di bawah disertakan dalam pakej anda:

• ZALMAN CNPS80G Rev.3 CPU Cooler
• Manual Arahan
• Intel Base Unit & Push Pin Set
• Thermal Grease (ZM-STG2M)

Image: The ZALMAN CNPS80G Rev.3 CPU Cooler, showing the fan and heatsink assembly.

3. Spesifikasi

Image: Dimensional drawing of the ZALMAN CNPS80G Rev.3 CPU Cooler.

4. Maklumat Keselamatan

• Ensure your computer is powered off and unplugged from the wall outlet before installation or maintenance.
• Handle the CPU cooler and other components with care to avoid damage.
• Jauhkan bahagian kecil daripada kanak-kanak.
• Refer to your motherboard manual for specific CPU and cooler installation guidelines.

5. Persediaan dan Pemasangan

The ZALMAN CNPS80G Rev.3 utilizes a clip-type installation method for both Intel and AMD platforms. Follow these general steps for installation:

5.1. Prepare the CPU and Motherboard

1. Ensure your CPU is correctly seated in its socket on the motherboard.
2. Clean the surface of the CPU's Integrated Heat Spreader (IHS) with isopropyl alcohol to remove any dust or residue.
3. Apply a small amount of the included thermal grease (ZM-STG2M) to the center of the CPU's IHS. Use a spreader or a thin, non-conductive object to spread it evenly into a thin layer across the entire surface.

Imej: Bersudut view of the ZALMAN CNPS80G Rev.3 CPU Cooler, highlighting the heatsink fins.

5.2. Attach Mounting Brackets (Intel Sockets)

For Intel LGA1700/1200/115x sockets, attach the provided Intel base unit and push-pin set to the cooler base. The base unit is designed to align with the cooler's pre-drilled holes. Secure it with the small screws provided.

Imej: Sisi view of the ZALMAN CNPS80G Rev.3 CPU Cooler, showing the heat pipes and base.

5.3. Install the Cooler

1. Carefully remove the protective film from the cooler's base.
2. Align the cooler's mounting pins with the holes around the CPU socket on the motherboard.
3. For Intel sockets, gently push down on each of the four push-pins until they click into place, securing the cooler to the motherboard. Ensure even pressure is applied.
4. For AMD sockets (AM5/AM4/AM3+/AM3), the cooler uses the existing motherboard backplate and retention clips. Hook one side of the cooler's clip onto the motherboard's retention bracket, then apply firm, even pressure to the opposite side until it clips securely into place.
5. Connect the cooler's 4-pin fan cable to the CPU_FAN header on your motherboard. Refer to your motherboard manual for the exact location of this header.

Image: The ZALMAN CNPS80G Rev.3 CPU Cooler, showing the 4-pin PWM fan connector.

6. Operasi

The ZALMAN CNPS80G Rev.3 features an 85mm PWM fan. PWM (Pulse Width Modulation) allows your motherboard to dynamically control the fan speed based on CPU temperature. This ensures optimal cooling performance when needed and quieter operation during lighter loads.

The top-flow design directs airflow downwards, not only cooling the CPU but also providing some airflow to surrounding motherboard components like the VRMs and RAM, contributing to overall system stability.

Image: Diagram illustrating the top-flow airflow pattern of the CPU cooler.

7. Penyelenggaraan

Penyelenggaraan tetap membantu memastikan prestasi optimum dan jangka hayat penyejuk CPU anda:

• Pembersihan Habuk: Bersihkan sirip heatsink dan bilah kipas secara berkala untuk mengelakkan pengumpulan habuk, yang boleh menghalang aliran udara dan mengurangkan kecekapan penyejukan. Gunakan udara termampat atau berus lembut.
• Tampal Terma: If you remove the cooler for any reason, it is recommended to clean off the old thermal paste from both the CPU and the cooler base and apply a fresh layer before reinstallation.

8. Penyelesaian masalah

If you encounter issues with your ZALMAN CNPS80G Rev.3 CPU Cooler, consider the following:

• Kipas Tidak Berpusing:
  • Check if the 4-pin fan connector is securely plugged into the CPU_FAN header on the motherboard.
  • Verify that the fan is not obstructed by cables or other components.
  • Access your motherboard's BIOS/UEFI settings to ensure the CPU fan control is enabled and configured correctly.
• Suhu CPU Tinggi:
  • Ensure the cooler is securely mounted to the CPU, with even pressure applied.
  • Sahkan bahawa pes haba telah disapu dengan betul dan sekata.
  • Check for excessive dust buildup on the heatsink fins and fan blades, and clean if necessary.
  • Verify proper airflow within your PC case.
• Bunyi Berlebihan:
  • Check for any loose cables or objects that might be touching the fan blades.
  • Pastikan kipas dipasang dengan selamat pada heatsink.
  • Adjust fan speed settings in your motherboard's BIOS/UEFI or through software if temperatures allow for lower RPMs.

9. Waranti dan Sokongan

This ZALMAN product (Model FN1961) is covered by a Waranti 1 tahun from the date of purchase through authorized dealers in Japan. Please retain your proof of purchase for warranty claims.

For technical support or further assistance, please contact your local ZALMAN authorized dealer or visit the official ZALMAN webtapak.