Veepeak L14-30R

Veepeak 30 Amp Flanged Outlet NEMA L14-30R Instruction Manual

Model: L14-30R

pengenalan

This manual provides essential information for the safe and proper installation, operation, and maintenance of your Veepeak 30 Amp Flanged Outlet NEMA L14-30R Locking Receptacle. Please read all instructions carefully before installation and use. Retain this manual for future reference.

Maklumat Keselamatan

AMARAN: Electrical shock hazard. Improper installation or use can result in serious injury or death. Always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.

  • Always disconnect power at the circuit breaker or fuse box before installing or servicing this device.
  • Ensure all wiring connections are secure and correct according to the wiring diagram and local codes.
  • Jangan melebihi penarafan elektrik peranti yang ditentukan.
  • This product is designed for use with NEMA L14-30P compatible plugs only.
  • Keep the weatherproof cap closed when the outlet is not in use to protect against moisture and dust.

Kandungan Pakej

  • 1 x Veepeak 30 Amp NEMA L14-30R Flanged Outlet
  • Skru Pemasangan

Spesifikasi

SpesifikasiNilai
Amppemadam30 Amps
Voltage125/250 Volt AC
Konfigurasi NEMAL14-30R
Poles / Wires3 Pole, 4 Wire Grounding
Beban Maks7500 Watt
Tolok Wayar yang disyorkan10 AWG/4C
bahanPolivinil Klorida (PVC)
PensijilanETL Listed (Conforms to UL & CSA standards)
Saiz Lubang yang Diperlukan2.5 inci

Persediaan dan Pemasangan

Alat yang Diperlukan: Screwdriver, wire strippers, drill (for mounting hole), appropriate drill bit.

  1. Sediakan Lokasi Pemasangan: Choose a suitable, dry location for installation. Drill a 2.5-inch diameter hole for the receptacle body. Ensure there is enough space behind the mounting surface for wiring connections.
  2. Sambungan Pendawaian:

    Refer to the wiring diagram below and the color-coded terminals on the back of the receptacle. Strip approximately 1/2 inch of insulation from each wire. Insert the wires into the corresponding terminals and tighten the screws securely. Ensure no bare wire strands are exposed outside the terminals.

    belakang view of the Veepeak L14-30R flanged outlet showing color-coded wiring terminals.

    Imej: Belakang view of the L14-30R outlet, displaying the four color-coded terminals for wiring connections (Green for Ground, White for Neutral, Red and Black for Hot).

    NEMA L14-30R wiring diagram showing X, Y, W, G terminals for 125/250 Volt, 30 Amp sambungan.

    Image: NEMA L14-30R configuration diagram. 'X' and 'Y' are hot lines (125V each to neutral, 250V between them), 'W' is neutral, and 'G' is ground.

    • Green (G): Wayar bawah tanah.
    • Putih (W): Kawat neutral.
    • Black (X): Hot wire (Line 1).
    • Red (Y): Hot wire (Line 2).
  3. Mount the Receptacle: Insert the receptacle body into the drilled hole. Secure the flanged outlet to the mounting surface using the provided screws. Ensure it is flush and stable.
  4. Pulihkan Kuasa: Setelah pemasangan selesai dan semua sambungan disahkan, sambungkan semula kuasa pada pemutus litar.
Depan view of the Veepeak L14-30R flanged outlet with the weatherproof cap open, showing the locking receptacle.

Imej: Depan view of the Veepeak L14-30R flanged outlet with its weatherproof cap open, revealing the NEMA L14-30R locking receptacle.

Arahan Operasi

  1. Membuka Penutup: Lift the weatherproof cap to access the receptacle.
  2. Connecting a Plug: Align the NEMA L14-30P plug with the receptacle. Insert the plug and twist clockwise to lock it into place. Ensure the plug is fully seated and locked.
  3. Disconnecting a Plug: Twist the plug counter-clockwise to unlock, then pull it straight out from the receptacle.
  4. Menutup Penutup: When the outlet is not in use, ensure the weatherproof cap is securely closed over the receptacle to protect it from environmental elements like rain, snow, and dust.
Depan view of the Veepeak L14-30R flanged outlet with the weatherproof cap closed, protecting the receptacle.

Imej: Depan view of the Veepeak L14-30R flanged outlet with its weatherproof cap securely closed, providing protection.

Penyelenggaraan

Penyelenggaraan tetap memastikan prestasi dan keselamatan yang optimum.

  • Pembersihan: Periodically clean the exterior of the outlet with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the cap is closed during cleaning.
  • Pemeriksaan: Regularly inspect the outlet for any signs of damage, wear, or corrosion. Check the weatherproof cap for proper sealing.
  • Semakan Sambungan: Annually, or if issues arise, disconnect power and check the wiring connections for tightness. Loose connections can cause overheating.

Menyelesaikan masalah

  • Tiada Kuasa:
    • Check the circuit breaker or fuse for the circuit. Reset if tripped.
    • Sahkan bahawa sumber kuasa aktif.
    • Ensure the plug is fully inserted and locked into the receptacle.
  • Sambungan longgar:
    • If the plug feels loose or power is intermittent, disconnect power and inspect the wiring connections at the back of the receptacle for tightness.
    • Inspect the plug on the appliance for damage.
  • Damage to Outlet:
    • If the outlet housing or terminals show signs of damage, cracking, or burning, discontinue use immediately and replace the unit.

Jika langkah penyelesaian masalah tidak menyelesaikan isu, rujuk juruelektrik bertauliah.

Waranti dan Sokongan

Veepeak provides a one-year hassle-free replacement warranty for this product. For warranty claims or customer service inquiries, please contact Veepeak customer support through the retailer where the product was purchased or visit the official Veepeak webtapak.

Dokumen Berkaitan - L14-30R

Praview FAQs dan Fehlerbehebung für Veepeak OBDCheck VP11
Soalan Lazim Umfassende und detaillierte Fehlerbehebung für den Veepeak OBDCheck VP11 (V2.2509). Finden Sie Antworten auf häufige Fragen zur Kompatibilität, Verbindung und Nutzung mit verschiedenen Fahrzeugen und Apps.
Praview Soalan Lazim dan Panduan Penyelesaian Masalah OBDCheck BLE
Soalan lazim yang komprehensif dan panduan penyelesaian masalah untuk pengimbas Veepeak OBDCheck BLE OBD-II. Cari jawapan kepada soalan biasa tentang keserasian apl, sokongan kenderaan, isu sambungan dan penggunaan.
Praview Veepeak OBDCheck BLE Arahan Pengguna
Arahan pengguna untuk Pengimbas Veepeak OBDCheck BLE Bluetooth OBD II, meliputi keserasian kenderaan, pengesyoran apl, panduan persediaan, Soalan Lazim, penyelesaian masalah, waranti dan penafian.
Praview Veepeak OBDCheck VP11 Arahan dan Panduan Pengguna
Arahan pengguna yang komprehensif untuk alat imbasan Veepeak OBDCheck VP11 OBD-II, meliputi keserasian kenderaan, pengesyoran apl, persediaan, Soalan Lazim, penyelesaian masalah dan maklumat waranti.
Praview Manual Pengguna VEEPEAK OBDCheck VP11: Ciri, Persediaan dan Panduan Penyelesaian Masalah
Manual pengguna yang komprehensif untuk pengimbas diagnostik VEEPEAK OBDCheck VP11 Bluetooth OBD2. Ketahui tentang cirinya, arahan persediaan, kenderaan dan apl yang serasi, petua penyelesaian masalah dan maklumat sokongan.
Praview Veepeak OBDCheck VP11 User Instructions: OBD-II Scan Tool Guide
Comprehensive user guide for the Veepeak OBDCheck VP11 Bluetooth OBD-II scan tool. Learn about vehicle compatibility, recommended Android apps, setup, troubleshooting, and warranty information for diagnosing your vehicle's engine and systems.