1. Pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your Ehaho 2PCS 1FT Whip Lights. These LED whip lights are designed to enhance visibility and aesthetics for various off-road vehicles. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Apa yang ada di dalam Kotak
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan.
- 2 x Spiral Whip Lights (1FT)
- 1 x Kawalan Jauh RF
- 1 x Flag Holder Set
- 2 x American Flags
- 2 x Off-Road Flags
- 2 x Skull Flags
- 1 x Manual Arahan (dokumen ini)
- 1 x Suis Rocker
- 1 x Controller
Figure 2.1: Contents of the LED Whip Light Kit, including two spiral whip lights, remote control, flag holder set, various flags, rocker switch, and controller.
3. Ciri-ciri
- Upgraded Brightness & Vibrant Colors: 2nd-Gen design with 84pcs RGB LEDs and 5050 RGB LED chips for tripled brightness and 360° uniform light.
- Dual Control & Programmable Effects: Control via dedicated App or RF remote. Features 16 million colors and 366 customized patterns (stream, strobe, cascade, chase, pulse). Adjust brightness, speed, color width, and motion directions.
- Integrated Spring Base: Reinforced spring base for flexibility, buffering pressure, and reducing breakage risk. Aesthetically pleasing and easy to disassemble.
- Tahan Lama & Kalis Air: Made of shockproof tube and bendable high-toughness resin. IP68 waterproof rating for off-road and extreme weather conditions.
- Improved Battery Protection: Includes a rocker switch to prevent vehicle battery drain when lights are in standby mode. Operates on 12V DC.
- Turn Signal & Music Synchronization: Features music sync function for lights to dance to phone music. Includes extra red stop/brake light, amber turn signal light, and white reverse/backup light for safety.
- Aplikasi Luas: Suitable for UTV, ATV, 4 Wheeler, trucks, Go Kart, RZR, Can-am, Polaris, Dune Buggy, SXS, Sand Rail, motorcycle, and Boat.
4. Maklumat Keselamatan
- Ensure the vehicle's power supply is 12V DC. If exceeding 12V, use a voltage penukar untuk mengelakkan kerosakan.
- Always disconnect the vehicle's battery before performing any electrical installation.
- Securely mount all components to prevent detachment during vehicle operation.
- Verify all wiring connections are correct and insulated to prevent short circuits.
- Do not stare directly into the LED lights for extended periods, as this may cause eye strain.
- Adhere to local regulations regarding vehicle lighting.
5. Persediaan dan Pemasangan
5.1. Quick Connect Base Assembly
The whip lights feature a quick-disconnect base for easy attachment and removal.
Video 5.1: Demonstrates the quick connect and release base mechanism for the whip lights. The video shows how to securely attach and detach the whip light from its base.
- Attach the quick connect base to your vehicle's mounting point.
- Align the whip light with the base and slide it down until it clicks securely into place.
- To remove, slide the quick disconnect base "up" to release.
5.2. Wiring the Rocker Switch
The included rocker switch helps protect your vehicle's battery from draining. Refer to the diagram below for wiring instructions.
Figure 5.2: Wiring diagram for the rocker switch. Connect the negative of the lamp's controller and battery to pin 8, incoming power to pin 2, and the positive of the lamp's controller to pin 3. Lower light negative to pin 7 and lower light positive to pin 6.
- Connect the negative wire of the lamp's controller and battery to pin 8 (Upper Light Neg. (-) source).
- Connect the incoming power wire to pin 2 (Incoming from power).
- Connect the positive wire of the lamp's controller to pin 3 (Outgoing to relay, accessory or equipment).
- For the lower light, connect the negative to pin 7 and positive to pin 6.
- Pastikan semua sambungan selamat dan terlindung dengan betul.
5.3. Turn Signal and Brake Light Wiring
The whip lights support turn signal, brake, and reverse light functions. Connect the corresponding wires to your vehicle's existing wiring system.
- Garis Biru: Connect to the vehicle's left turn signal wire.
- Black Line: Connect to the vehicle's right turn signal wire.
- Garis merah: Connect to the vehicle's brake light wire.
- White Line: Connect to the vehicle's reverse/backup light wire.
Figure 5.3: Wiring connections for turn signals, brake, and reverse lights. Blue for left turn, black for right turn, red for brake, and white for reverse.
6. Operasi
6.1. Operasi Alat Kawalan Jauh
The included RF remote control allows for easy adjustment of light settings.
Figure 6.1: Layout of the RF Remote Control, showing buttons for power, brightness, color selection, dynamic modes, speed adjustment, and music rhythm modes.
- HIDUP/MATI: Hidupkan atau matikan lampu.
- R/G/B/W: Select Red, Green, Blue, or White static colors.
- Color Buttons (Yellow, Red, Orange, Blue): Select additional static colors.
- Pelarasan Kecerahan: Increase or decrease light brightness.
- Butang Mod (1-12): Select from 12 unique exclusive modes.
- DIY Buttons (DIY1-DIY4): Save your favorite custom modes. Long press to save.
- AUTO: Activates automatic play of various modes.
- Pelarasan Kelajuan: Meningkatkan atau mengurangkan kelajuan mod dinamik.
- Pelarasan Warna: Adjust color settings within dynamic modes.
- Music Rhythm Modes (1-4): Synchronize lights with music.
- SOS: Activates an SOS emergency mode.
- Timer (30 min, 60 min): Tetapkan pemasa untuk penutupan automatik.
6.2. Operasi Kawalan Aplikasi
Download the dedicated Ehaho app from your smartphone's app store for advanced control and customization.
Gambar 6.2: Cthample of the smartphone app interface for controlling the whip lights, offering a color wheel, preset modes, and music synchronization options.
- Roda Warna: Pilih daripada 16 juta warna.
- Custom Patterns: Access 366 customized patterns.
- Penyegerakan Muzik: Lights dance to the rhythm of your phone's music.
- Kecerahan / Kelajuan: Fine-tune brightness and animation speed.
- Mod DIY: Create and save your own unique lighting sequences.
7. Penyelenggaraan
- Pembersihan: Wipe the whip lights with a soft, damp kain. Elakkan pembersih atau pelarut yang melelas.
- Pemeriksaan: Periksa semua sambungan pendawaian secara berkala untuk kesesakan dan tanda-tanda haus atau kerosakan.
- Kalis air: The lights are IP68 waterproof, but ensure all connections are sealed properly after installation or maintenance.
- Storan: If removing the lights for extended periods, store them in a dry, cool place away from direct sunlight.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu tidak menyala. | No power, loose connection, faulty switch/controller. | Check power source, ensure all wires are securely connected, test rocker switch and controller. |
| Lampu berkelip atau malap. | Volum rendahtage, poor connection, damaged wiring. | Verify 12V DC power, inspect connections for corrosion or looseness, check for damaged wires. |
| Alat kawalan jauh tidak berfungsi. | Dead battery in remote, remote out of range, interference. | Replace remote battery (CR2032), ensure line of sight to controller, reduce interference. |
| Kawalan aplikasi tidak bersambung. | Bluetooth not enabled, app not paired, outdated app. | Ensure Bluetooth is on, pair the device in the app, update the app to the latest version. |
| Turn signals/brake lights not functioning correctly. | Incorrect wiring, faulty vehicle signal. | Double-check the specific wiring connections for turn signals, brake, and reverse lights. Test vehicle signals. |
9. Spesifikasi
- model: EH1FT2
- Light Source Length: 1 Kaki
- Bilangan Kepingan: 2
- Jenis LED: 84pcs RGB LEDs with 5050 RGB LED chips
- warna: RGB (Multi-Color)
- Kaedah Kawalan: APP Control, RF Remote Control
- Ciri Khas: Customizable Flash Patterns, Customizable Music Modes, Dust Proof, Multi-Color, Integrated Spring Base, Battery Protect Rocker Switch, Turn Signal & Music Synchronization
- Bahan: Aluminium, Plastik, Getah
- Tahap Rintangan Air: IP68 Kalis Air
- Vol Operasitage: 12V DC
- Dimensi Item (L x W x H): 14 x 0.8 x 0.8 inci
- Berat Barang: 3.34 paun
- Bateri: 1 CR2032 battery required for remote (included)
- Jenis Kesesuaian Automotif: Universal Fit
10. Waranti dan Sokongan
Ehaho products are manufactured to high-quality standards. For warranty information, technical support, or assistance with installation and troubleshooting, please refer to the contact information provided on the product packaging or visit the official Ehaho webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.
