ADATA Fusion 1600W Titanium Power Supply Unit User Manual

1. Pengenalan

This manual provides essential information for the proper installation, operation, and maintenance of your ADATA Fusion 1600W Titanium Power Supply Unit (PSU). Designed for high-performance computing systems, this 80 Plus Titanium certified PSU features ATX 3.0 and PCIe 5.0 compatibility, ensuring stable and efficient power delivery. Please read this manual thoroughly before proceeding with installation or use.

2. Maklumat Keselamatan

• Bahaya Elektrik: Bekalan kuasa mengandungi vol tinggitage components. Do not open the PSU casing. Servis hanya boleh dilakukan oleh kakitangan yang berkelayakan.
• Pemutusan Kuasa: Always disconnect the AC power cord from the wall outlet before installing, removing, or cleaning the PSU or any other computer components.
• Pembumian yang betul: Ensure your computer system and the wall outlet are properly grounded to prevent electrical shock.
• Pengudaraan: Do not block the ventilation openings of the PSU. Ensure adequate airflow within your computer case to prevent overheating.
• Kelembapan: Jauhkan PSU daripada air, kelembapan dan cecair lain.
• Suhu: Operate the PSU within the specified temperature range. Avoid extreme heat or cold.
• Pengurusan Kabel: Route cables carefully to avoid pinching or damage, which can lead to short circuits or fire hazards.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

• ADATA Fusion 1600W Titanium Power Supply Unit
• Modular Cable Set (including Motherboard, CPU, PCIe/GPU, SATA, and Molex cables)
• Kord Kuasa AC
• Skru Pemasangan
• Manual Pengguna (dokumen ini)

4. Persediaan

4.1. Pemasangan Fizikal

1. Ensure your computer is powered off and the AC power cord is disconnected from the wall outlet.
2. Buka bekas komputer anda.
3. Locate the PSU mounting area, typically at the bottom or top rear of the case.
4. Carefully slide the ADATA Fusion PSU into the designated slot.
5. Pasangkan PSU pada bekas menggunakan skru pelekap yang disediakan.

4.2. Sambungan Kabel

The ADATA Fusion 1600W PSU is fully modular, allowing you to connect only the cables required for your system. Refer to the image below for port identification.

This image displays the ADATA Fusion 1600W Titanium Power Supply Unit from an angled top-down perspective. The modular cable connection panel is visible on the left side, labeled for SATA & Molex, Prime Port - Motherboard, CPU & VGA, and 12VHPWR. The top features a fan grill with a geometric pattern, revealing the cooling fan beneath. The side of the unit shows the 'FUSION' branding.

1. Kuasa Papan Induk: Sambungkan kabel ATX 24-pin dari PSU ke port yang sepadan pada papan induk anda.
2. Kuasa CPU: Connect the 4+4-pin or 8-pin EPS/CPU cable(s) from the PSU to the CPU power connector(s) on your motherboard.
3. PCIe/GPU Power: Connect the appropriate 6+2-pin or 12VHPWR PCIe 5.0 cables from the PSU to your graphics card(s). Ensure all required power connectors on your GPU are utilized.
4. SATA/Molex Power: Connect SATA power cables to your storage drives (HDDs, SSDs) and optical drives. Use Molex cables for other peripherals as needed.
5. Sambungan persisian: Connect any other necessary cables for case fans, RGB controllers, or other components.
6. Kuasa AC: Once all internal connections are made, connect the AC power cord to the PSU and then to a grounded wall outlet.

5. Beroperasi

After completing the installation and cable connections:

1. Pastikan suis kuasa di belakang PSU berada dalam kedudukan 'HIDUP'.
2. Power on your computer system.
3. The ADATA Fusion PSU is designed for efficient and stable operation. Its 80 Plus Titanium certification indicates high power efficiency, reducing heat generation and energy consumption.
4. This PSU supports Prime Ecosystem Management Software. Refer to the ADATA website for software download and instructions on monitoring and controlling PSU performance, fan speeds, and other features.

6. Penyelenggaraan

• Pembersihan: Periodically clean the exterior of the PSU and the fan grill to prevent dust buildup. Use compressed air to gently remove dust from the fan and internal components (ensure the PSU is powered off and unplugged).
• Pemeriksaan Kabel: Periksa semua sambungan kabel secara berkala untuk memastikan ia selamat dan bebas daripada kerosakan.
• Keadaan Persekitaran: Maintain a clean, dry, and well-ventilated environment for your computer system to optimize PSU lifespan and performance.

7. Penyelesaian masalah

If you encounter issues with your ADATA Fusion PSU, consider the following common troubleshooting steps:

• Tiada Kuasa:
  • Pastikan kord kuasa AC disambungkan dengan selamat ke kedua-dua PSU dan alur keluar dinding.
  • Verify the PSU power switch is in the 'ON' position.
  • Periksa alur keluar dinding dengan peranti lain untuk mengesahkan ia mempunyai kuasa.
  • Ensure all modular cables are firmly seated in both the PSU and the respective components.
• Ketidakstabilan/Ranap Sistem:
  • Confirm that your PSU wattage is sufficient for all installed components.
  • Periksa sambungan kabel yang longgar.
  • Pantau suhu sistem untuk memastikan komponen tidak terlalu panas.
• Bunyi Kipas:
  • Ensure the PSU fan is not obstructed by cables or dust.
  • If using Prime Ecosystem Management Software, check fan speed settings.

If problems persist after attempting these steps, contact ADATA customer support for further assistance.

8. Spesifikasi

9. Waranti dan Sokongan

ADATA provides a limited warranty for the Fusion 1600W Titanium Power Supply Unit. For detailed warranty terms, conditions, and registration information, please visit the official ADATA webtapak atau rujuk kad jaminan yang disertakan dengan produk anda.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact ADATA customer service through their official webtapak atau maklumat hubungan yang diberikan dalam pembungkusan produk anda.

Pegawai ADATA Webtapak: www.adata.com