KEMIMOTO Motorcycle Speaker MU-B0117 User Manual

1. Produk Lebihview

The KEMIMOTO Motorcycle Speaker MU-B0117 is a waterproof stereo sound bar designed for motorcycles and ATVs. It features a built-in amplifier, Bluetooth connectivity, FM radio, AUX input, and USB playback. This speaker is engineered to provide clear audio even at highway speeds.

Image: KEMIMOTO Motorcycle Speaker providing clear audio at highway speeds.

Image: Internal components of the speaker, illustrating the high-performance audio amplifier for clear sound.

2. Apa yang ada di dalam Kotak

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan.

Image: All items included in the KEMIMOTO Motorcycle Speaker package.

• Pembesar suara x 1
• Kord kuasa x 1
• Controller Extension Cable x 1
• Spare fuse x 2
• Controller Power Cord x 1
• Pemasangan clamp anti-slip pad x 4
• Pengikat kabel x 5
• Controller stand x 1
• Pengawal x 1
• Sepana hex x 1
• Skru kepala soket heksagon x 4
• Relax washer x 4
• Kacang x 2
• Extension bracket x 2
• Pemasangan clamp x 2
• Manual x 1

3. Persediaan dan Pemasangan

3.1 Memasang Pembesar Suara

The speaker features a universal mount clamp designed for 0.75-1 inch round rods. Ensure the mounting location is secure and does not obstruct vehicle controls or visibility.

Image: Step-by-step installation of the mounting clamp and speaker onto a handlebar.

1. Pasang cl pelekapamps to your desired location on the handlebar or round rod.
2. Secure the extension brackets to the clamps.
3. Position the speaker onto the extension brackets and fasten it using the provided screws and washers.
4. Mount the controller using its stand in an easily accessible location.

3.2 Arahan Pendawaian

The speaker system requires a standard 12V power connection. Use the provided long power cord with ring terminal connectors for a secure connection to your vehicle's battery.

Image: Detailed wiring diagram for the speaker system.

• Connect the red wire to the positive (+) pole of the 12V power supply.
• Connect the black wire to the negative (-) pole of the 12V power supply.
• Ensure the 3A fuse is properly installed in the power line.
• Connect the controller interface cable to the main unit.
• The Bluetooth signal cable is integrated within the wire harness protection net.
• The USB input port is for inserting a USB flash disk for media playback.

4. Arahan Operasi

4.1 Hidupkan/Mati Kuasa

Press and hold the power button on the controller to turn the speaker system on or off.

4.2 Pemilihan Mod

Press the 'MODE' button on the controller to switch between available playback modes: Bluetooth, FM Radio, AUX, and USB.

4.3 Sambungan Bluetooth

To connect a Bluetooth-compatible device:

1. Tukar pembesar suara kepada mod Bluetooth.
2. Dayakan Bluetooth pada peranti mudah alih anda (telefon, tablet, dll.).
3. Cari untuk available devices and select 'KEMIMOTO Speaker' (or similar name) to pair.
4. Setelah dipasangkan, audio daripada peranti anda akan dimainkan melalui pembesar suara.

Image: Wireless connection via Bluetooth, showing a phone paired with the speaker.

4.4 Operasi Radio FM

In FM Radio mode, use the controller buttons to scan for stations, change frequencies, and adjust volume.

4.5 Input AUX

Connect an external audio device using a 3.5mm AUX cable to the AUX input port on the speaker system.

4.6 Main Semula USB

Masukkan pemacu kilat USB yang mengandungi audio files into the USB input port for direct playback.

5. Penyelenggaraan

5.1 Reka Bentuk Kalis Air

The KEMIMOTO Motorcycle Speaker features a double waterproof aluminum enclosure. This design protects the speaker from water damage, making it suitable for use in various weather conditions. Ensure all connections are secure to maintain water resistance.

5.2 Pembersihan

Clean the speaker and controller with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the finish or electronic components.

5.3 Penggantian Fius

If the speaker system loses power, check the 3A fuse in the power line. Replace it with a spare fuse of the same rating if necessary. Incorrect fuse replacement can cause damage to the unit or vehicle electrical system.

6. Penyelesaian masalah

• Tiada Kuasa: Check the power connections to the 12V supply. Ensure the fuse is intact and properly seated. Verify the vehicle's battery has sufficient charge.
• Tiada Bunyi: Confirm the speaker is powered on and the volume is turned up. Check the audio source (Bluetooth, FM, AUX, USB) and ensure it is playing. For Bluetooth, verify the device is paired and connected.
• Kelantangan Rendah/Kualiti Bunyi Teruk: Adjust the volume on both the speaker and your connected device. Ensure the audio source is of good quality. Check for any obstructions around the speaker. Note that environmental factors like wind noise at high speeds can affect perceived loudness.
• Pemutusan sambungan Bluetooth: Ensure your device is within the 10-meter Bluetooth range. Avoid obstacles that may interfere with the signal. Try re-pairing the device.
• Statik Radio FM: Ensure the FM antenna is properly connected. Move to an area with better signal reception.
• Fuse Blows Repeatedly: This may indicate a short circuit or an electrical issue. Disconnect the speaker and consult a qualified technician. Do not repeatedly replace fuses without addressing the underlying cause.

7. Spesifikasi

Image: Product dimensions and mounting component measurements.

8. Waranti dan Sokongan

This KEMIMOTO product comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact KEMIMOTO customer support.

For technical assistance, troubleshooting, or replacement parts, please visit the official KEMIMOTO webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.