KOORUI KR20Y Single Monitor Desk Mount User Manual

pengenalan

Thank you for choosing the KOORUI KR20Y Single Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. Designed for 17-32 inch flat and curved screens, this mount offers VESA 75x75mm and 100x100mm compatibility and supports monitors weighing between 2-9 kg (4.4-19.8 lbs). Please read this manual thoroughly before assembly and retain it for future reference.

Maklumat Keselamatan

Sila patuhi langkah keselamatan berikut untuk mengelakkan kecederaan atau kerosakan:

• Jangan melebihi kapasiti beban maksimum 9 kg (19.8 lbs).
• Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and your monitor.
• Follow all assembly instructions carefully. If you have any doubts, consult a qualified professional.
• Jauhkan kanak-kanak dan haiwan peliharaan semasa pemasangan.
• Check all connections and fasteners regularly to ensure they remain secure.
• Elakkan kabel daripada tersepit semasa pelarasan untuk mengelakkan kerosakan.

Kandungan Pakej

Sila sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Perhimpunan Lengan Monitor
• C-Clamp Perkakasan Pemasangan
• Perkakasan Pemasangan Grommet
• Plat VESA
• Monitor Mounting Screws (various sizes)
• Hex Keys / Adjustment Tools
• Klip Pengurusan Kabel
• Manual Pengguna (dokumen ini)

Image: All components of the KOORUI KR20Y Monitor Arm, including the arm, C-clamp, and grommet mount options.

Spesifikasi

Image: Visual representation of the monitor arm's universal compatibility, showing supported screen sizes (17-32 inch), load capacity (2-9kg), and VESA standards (75x75mm, 100x100mm).

Persediaan dan Pemasangan

The KOORUI KR20Y monitor arm offers two installation options: C-Clamp Mount and Grommet Mount. Choose the method best suited for your desk.

Image: Diagram illustrating the two available installation methods: C-Clamp Mount and Grommet Mount.

1. C-Clamp Gunung

This method is suitable for desks with a thickness between 20-80mm (0.78-3.14 inches).

1. Pasangkan C-clamp base to the edge of your desk.
2. Ketatkan clamp screw until the base is securely fastened to the desk. Ensure it is stable and does not wobble.
3. Insert the main pole of the monitor arm into the C-clamp asas.
4. Secure the pole with the provided screw or knob.

2. Grommet Mount

This method requires a pre-drilled hole in your desk with a diameter of 10-50mm (0.39-1.96 inches) and is suitable for desks with a thickness between 20-90mm (0.78-3.54 inches).

1. Bongkar C-clamp components from the base if they are pre-attached.
2. Insert the grommet bolt through the pre-drilled hole in your desk.
3. Secure the grommet base from underneath the desk using the provided washer and nut. Tighten firmly.
4. Insert the main pole of the monitor arm into the grommet base.
5. Secure the pole with the provided screw or knob.

3. Memasang Monitor

1. Attach the VESA plate to the back of your monitor using the appropriate screws. Ensure the screws are not overtightened.
2. Slide the monitor (with the attached VESA plate) onto the arm's VESA head.
3. Secure the monitor to the arm using the locking mechanism (if present) or by tightening the designated screws.

4. Pengurusan Kabel

Route your monitor cables through the integrated cable management channels on the arm to maintain a tidy workspace.

Image: The monitor arm with cables neatly routed through its integrated cable management system, contributing to a clean desk setup.

Arahan Operasi

The KOORUI KR20Y monitor arm features a gas spring system for smooth and effortless adjustments. Adjustments can be made to achieve an ergonomic viewpengalaman dalam.

Image: Detailed diagram showing the full range of motion of the monitor arm, including tilt, swivel, rotation, and maximum extension/height.

1. Pelarasan Ketinggian

Gently push or pull the monitor up or down to adjust its height. The gas spring will hold the monitor in your desired position. If the arm is too stiff or too loose, adjust the gas spring tension (see Penyelenggaraan bahagian).

2. Penyesuaian Tilt

Grasp the top and bottom edges of your monitor and tilt it forward or backward to achieve an optimal viewing angle. The tilt range is +85° to -30°.

3. Swivel Adjustment

Rotate the monitor left or right at the VESA plate connection point. The swivel range is ±90°.

4. Rotation (Portrait/Landscape)

Rotate the monitor 360° to switch between landscape and portrait orientations as needed.

Imej: X-ray view highlighting the premium gas spring mechanism within the monitor arm, indicating its durability and smooth adjustment capabilities.

Penyelenggaraan

• Gas Spring Tension Adjustment: If the monitor arm does not hold its position or is difficult to move, use the provided hex key to adjust the gas spring tension. Turn clockwise to increase tension (for heavier monitors) and counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the arm moves smoothly and holds the monitor securely.
• Pembersihan: Lap lengan monitor dengan kain lembut,amp kain. Elakkan pembersih atau pelarut yang melelas.
• Pemeriksaan Berkala: Regularly check all screws and connections to ensure they are tight and secure.

Menyelesaikan masalah

Waranti dan Sokongan

For warranty information or technical support, please refer to the warranty card included with your product or visit the official KOORUI website. If you encounter any issues not covered in this manual, please contact KOORUI customer service for assistance.