ELENKER 2-in-1 Rollator Walker and Transport Chair User Manual

pengenalan

The ELENKER 2-in-1 Rollator Walker and Transport Chair is designed to provide versatile mobility support. This device functions as both a rollator walker for independent mobility and a transport chair for assisted movement. It features a sturdy iron frame, 10-inch non-slip wheels, a dual braking system, and convenient accessories to enhance user experience and safety.

Maklumat Keselamatan

• Always engage the brakes when sitting down or standing up from the device.
• Ensure all locking mechanisms are securely fastened before use.
• Jangan melebihi kapasiti berat maksimum 300 paun.
• Use the safety belt when operating in transport chair mode.
• Regularly inspect wheels, brakes, and frame for any signs of wear or damage.
• Avoid using the device on uneven or slippery surfaces without proper caution.

Persediaan

1. Membuka Rollator:

   Carefully remove the rollator from its packaging. Place it on a flat, stable surface. Pull the handles outwards until the frame fully extends and locks into place. Ensure the seat is flat and secure.

2. Melaraskan Ketinggian Hendal:

   Press the adjustment buttons on the side of the handlebars and slide them up or down to your desired height. Ensure the handles are at a height where your elbows are slightly bent when holding them, allowing for comfortable and stable walking. Release the buttons to lock the handles in position. Verify both handles are at the same height.

   

   Image: Adjusting the handlebar height for optimal user comfort.

3. Attaching Footrests (for Transport Chair Mode):

   Locate the detachable footrests. Align the footrest connectors with the attachment points on the front frame of the rollator. Push firmly until they click into place. Ensure they are securely attached before use.

   

   Image: Detachable footrests for use in transport chair mode.

Arahan Operasi

Rollator Walker Mode

This mode is for users who require walking assistance but can propel themselves.

1. berjalan:

   Stand behind the rollator, holding both handlebars. Push the rollator forward a short distance, then step forward. Maintain a comfortable pace and keep your body upright.

   

   Image: A person using the ELENKER rollator walker for outdoor mobility.

2. Menggunakan Brek:

   To slow down, gently squeeze the brake levers towards the handlebars. To lock the brakes for sitting or stability, push the brake levers down until they click into the locked position. Pull them up to release.
3. Menggunakan Tempat Duduk:

   Ensure the rollator is on a flat surface and the brakes are locked. Turn around and sit gently on the padded seat. The reversible backrest can be positioned for comfort. Always lock the brakes before sitting.

   

   Image: A person resting on the comfortable seat of the ELENKER rollator.

4. Aksesori:
   • Cane Holder: Secure your cane in the integrated holder to keep your hands free.
   • Pemegang cawan: Place your beverage in the cup holder for easy access.
   • Under-Seat Basket: Store personal items in the zippered storage bag located under the seat.
   

   Image: The ELENKER rollator walker highlighting its convenient accessories.

Transport Chair Mode

This mode is for users who need to be pushed by an attendant.

1. Penukaran:

   To convert to transport chair mode, ensure the footrests are attached. Flip the backrest over to face the front, providing back support for the seated user. The attendant will push from the rear handles.

   

   Image: The ELENKER device configured as a transport chair, with an attendant pushing a seated user.

2. Using the Safety Belt:

   Once the user is seated, fasten the safety belt securely across their lap for added security during transport.
3. Attendant Operation:

   The attendant should use the rear handles to push and steer the transport chair. The dual braking system can be operated by the attendant to control speed and lock the wheels when stationary.

   Video: Demonstrates the ELENKER 2-in-1 Rollator Walker in both walker and transport chair modes, highlighting its 10-inch non-slip wheels and compact folding design.

Lipatan untuk Penyimpanan dan Pengangkutan

The ELENKER 2-in-1 device features a compact folding design for easy storage and transport.

1. Prepare for Folding:

   Ensure the footrests are removed (if attached) and the backrest is in its upright position.

2. Mekanisme Lipatan:

   Lift the strap or handle located on the seat. The frame will begin to fold inward. Continue lifting until the device is fully collapsed.
3. Securing for Transport:

   Once folded, a locking mechanism will engage to keep the device compact, preventing it from unfolding during transport. This allows for easy placement in a car trunk or storage space.

   

   Image: The ELENKER rollator walker in its compact folded state, ready for transport in a car trunk.

Penyelenggaraan

• Pembersihan: Lap bingkai dan tempat duduk dengan iklanamp kain dan sabun lembut. Elakkan pembersih yang kasar.
• Pemeriksaan Roda: Periodically check the 10-inch non-slip wheels for debris, wear, or damage. Ensure they rotate freely.
• Pemeriksaan Brek: Test the dual braking system regularly to ensure proper function. Adjust if necessary according to manufacturer guidelines.
• Pengikat: Pastikan semua skru, bolt dan mekanisme penguncian ketat dan selamat.

Menyelesaikan masalah

• Kesukaran Melipat/Membuka: Ensure no obstructions are present and all components are aligned correctly. Do not force the mechanism.
• Brek Tidak Terpakai: Check the brake cables for tension. If loose, they may need adjustment by a qualified technician.
• Unstable Movement: Verify all frame connections are secure and wheels are properly attached. Ensure handlebars are locked at an even height.

Spesifikasi

Waranti dan Sokongan

ELENKER products are 100% tested before leaving the factory. For any inquiries or assistance, please contact our customer service. We offer 24-hour friendly email customer service to address your needs.

Sila rujuk dokumentasi pembelian anda untuk butiran jaminan khusus.