LASER TREE LT-80W-F45 10W Laser Module Instruction Manual

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your LASER TREE LT-80W-F45 10W Optical Power Laser Module. Designed for compatibility with 3018 and 3018 Pro CNC machines, this module enhances your engraving and cutting capabilities. Please read this manual thoroughly before use to ensure safe and optimal performance.

2. Maklumat Keselamatan

WARNING: This is a Class 4 laser product. Direct exposure to the laser beam can cause severe eye and skin damage. Always wear appropriate laser safety goggles when operating this device. Ensure the protective cover is in place during operation. Never look directly into the laser beam or at reflections. Operate in a well-ventilated area.

• Always wear certified laser safety goggles (OD6+) when the laser is active.
• Ensure the work area is clear of flammable materials.
• Never leave the laser module operating unattended.
• Jauhkan kanak-kanak dan haiwan peliharaan dari kawasan operasi.
• Ensure proper ventilation to dissipate fumes and smoke.

3. Kandungan Pakej

Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

• LASER TREE LT-80W-F45 Laser Module
• Spare protective lens (Φ13*1.1mm)
• Focus fixing plate (x3)
• Eye protection design (protective cover)
• 3PIN Input cable
• Paip udara
• Mounting screws and tools

4. Produk Lebihview

The LASER TREE LT-80W-F45 is a 10W (10000mW) optical power laser module featuring a built-in FAC (Fast Axis Collimation) lens for a double ultra-fine compressed spot (0.08*0.08mm). Its cylindrical housing design is specifically tailored for easy integration with 3018 and 3018 Pro CNC machines. The module includes an air assist port to improve cutting performance and reduce charring.

5. Persediaan dan Pemasangan

Follow these steps to install the LT-80W-F45 laser module on your CNC 3018 machine:

1. Putuskan Kuasa: Before starting, ensure all power to your CNC machine is disconnected.
2. Remove Existing Spindle: Loosen the screws on the side of the bracket that holds your existing spindle or laser module. Carefully remove it.
3. Install LT-80W-F45: Insert the LASER TREE LT-80W-F45 module into the bracket. The cylindrical design is made to fit securely. Tighten the screws to fix the module in place.
4. Pasang Penutup Pelindung: Ensure the laser protective cover is properly installed over the laser output aperture.
5. Connect Air Pipe: Attach the provided air pipe to the air assist port on the module. Connect the other end to an air pump (not included) for optimal cutting performance.
6. Sambungan Pendawaian: Connect the 3-pin input cable (VCC, GND, PWM) from the laser module to the corresponding ports on your CNC machine's control board. Refer to your CNC machine's manual for specific wiring diagrams if needed.

6. Arahan Operasi

The LT-80W-F45 module is capable of engraving and cutting a wide range of materials. Always perform small test cuts or engravings on scrap material to determine optimal settings (speed, power, passes) for your specific material.

6.1 Keserasian Bahan

This laser module can be used on various materials, including but not limited to:

• Wood (plywood, pinewood, bamboo)
• Papan MDF
• kulit
• Akrilik hitam
• Stainless steel (engraving without black paint)
• Fabric, Paper, Rock slabs

6.2 Memberi tumpuan

The LT-80W-F45 features a fixed-focus design. Use the provided focus fixing plates to set the correct focal distance between the laser module and your material. Typically, the optimal focal length is 45mm.

6.3 Air Assist

Utilizing air assist significantly improves cutting and engraving quality by blowing away smoke and debris, preventing charring, and enhancing the cutting effect. It is highly recommended for cutting thicker materials.

6.4 Engraving and Cutting Examples

The module offers remarkable cutting and engraving capabilities:

• Cutting through 8mm thickness plywood by one pass at a speed of 1.5mm/s.
• Directly engraving mirror stainless steel without needing to paint it black.

7. Penyelenggaraan

Proper maintenance ensures the longevity and consistent performance of your laser module.

• Clean Protective Lens: Regularly inspect and clean the protective window glass. Fingerprints or debris on the lens can significantly affect cutting ability and decrease power output. Use a soft, lint-free cloth and lens cleaning solution.
• Keep Fan Clear: Ensure the built-in cooling fan (10000 rpm) is free from dust and obstructions to maintain optimal heat dissipation.
• Semak Sambungan: Periodically check all electrical and air assist connections to ensure they are secure.

8. Penyelesaian masalah

If you encounter issues with your laser module, consider the following common problems and solutions:

• Tiada Output Laser:
  • Check all power and signal connections (VCC, GND, PWM).
  • Ensure the CNC control board is supplying the correct voltage (DC 12V) and PWM signal (5V PWM modulation).
  • Verify that the laser is enabled in your software.
• Weak Laser Power/Poor Cutting:
  • Clean the protective lens as described in Section 7.
  • Verify the focal distance is correctly set (45mm).
  • Check if the air assist is functioning correctly and providing sufficient airflow.
  • Adjust power and speed settings in your engraving software.
• Modul Terlalu Panas:
  • Pastikan kipas penyejuk beroperasi dan tidak terhalang.
  • Operate in a well-ventilated environment.
• Compatibility Issues with CNC Board:
  • Some CNC motherboards may require an interface adapter board if they do not supply sufficient wattage or have different pin configurations (e.g., 2-pin vs. 3-pin).
  • Always cross-reference your CNC board's pinout with the laser module's requirements.

If problems persist, please contact LASER TREE customer support for assistance.

9. Spesifikasi

10. Waranti dan Sokongan

LASER TREE is committed to providing high-quality products and customer satisfaction. If you require pre-sale consultation or encounter any problems with your LT-80W-F45 laser module, please feel free to contact us directly. Our professional engineering team is available to troubleshoot and resolve issues for you.

Untuk sokongan, sila layari LASER TREE Store on Amazon or contact us through the platform where you purchased the product.