pengenalan
Welcome to the user manual for your ANMEATE SM530TX Baby Monitor Camera. This device is designed to provide reliable and clear monitoring of your baby, offering peace of mind with its advanced features. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new baby monitor.

Image: The ANMEATE SM530TX Baby Monitor Camera, a white dome-shaped camera with a black lens area, designed for indoor use.
Persediaan
Setting up your ANMEATE SM530TX Baby Monitor Camera is designed to be straightforward.
Gandingan Awal
- Ensure both the camera unit and the monitor unit are powered on.
- The units are typically pre-paired from the factory. If not, or if you are adding new cameras, follow the pairing instructions in the monitor's menu.
- Additional camera units can be paired with the ANMEATE SM530 baby monitor in approximately 5 seconds.
Penempatan
- Place the camera unit in a secure location that provides a clear view of the monitoring area.
- Ensure the camera is out of reach of children.
- The camera supports wall mounting for optimal positioning.
Arahan Operasi
The ANMEATE SM530TX baby monitor offers various viewing modes, especially when multiple cameras are connected.
Multi-Camera Scan Mode
This mode allows the monitor to automatically cycle through views from multiple connected cameras. The monitor supports up to 4 cameras.
To Turn On Scan Mode:
- Ensure two or more cameras are connected to the monitor.
- Tekan dan tahan butang "OK" button on the monitor for 3 seconds.
- "Scan Mode On" will appear on the bottom left of the screen, indicating the mode is active.
- In single-screen mode, the monitor will loop real-time video from up to 4 cameras every 15 seconds.
- In split-screen mode (for 3 or 4 cameras), the monitor will loop video every 30 seconds.
To Turn Off Scan Mode:
- Tekan dan tahan butang "OK" button on the monitor for 3 seconds.
- The multi-camera scan mode will turn off, and the camera loop logo at the top of the screen will disappear.
Recommended Scan Mode Usage:
- For 2 cameras, it is recommended to use "Multi-Camera Scan Mode" in single-screen display.
- For 3 or 4 cameras, it is recommended to use "Multi-Camera Scan Mode" in split-screen display.
Penglihatan Malam
The ANMEATE SM530TX camera is equipped with night vision capabilities, allowing you to monitor your baby clearly even in low-light or dark conditions. This feature activates automatically when ambient light is insufficient.
Penyelenggaraan
Penyelenggaraan yang betul memastikan jangka hayat dan prestasi optimum monitor bayi anda.
Pembersihan
- Wipe the camera and monitor units with a soft, dry cloth.
- Jangan gunakan pembersih atau pelarut yang melelas.
- Ensure the lens is clean for clear image quality.
Penyimpanan
- Simpan peranti di tempat yang sejuk dan kering apabila tidak digunakan untuk tempoh yang lama.
- Jauhkan daripada cahaya matahari langsung dan suhu yang melampau.
Menyelesaikan masalah
If you encounter issues with your ANMEATE SM530TX, refer to the following common solutions.
No Image/Signal
- Ensure both the camera and monitor are powered on and fully charged or connected to power.
- Check that the camera and monitor are within range of each other.
- Re-pair the camera and monitor if the connection is lost.
Scan Mode Not Activating/Deactivating
- Verify that you are holding the "OK" button for the required 3 seconds.
- Ensure at least two cameras are connected for scan mode to be available.
Kualiti Imej Lemah
- Bersihkan kanta kamera dengan lembut dengan kain lembut.
- Ensure there are no obstructions between the camera and the monitor.
- Check for strong interference from other wireless devices.
Spesifikasi
Key technical specifications for the ANMEATE SM530TX Baby Monitor Camera.
| Ciri | Perincian |
|---|---|
| Jenama | ANMEATE |
| Model | SM530TX |
| Penggunaan yang Disyorkan | Monitor Bayi |
| Teknologi Ketersambungan | Wayarles (Wi-Fi) |
| Number of Channels Supported | Sehingga 4 kamera |
| Ciri-ciri | Penglihatan Malam |
| Penggunaan Dalaman/Luar | Dalaman |
| Sumber Kuasa | Elektrik Bertali |
| Jenis Pemasangan | Lekap di dinding |
| Berat Barang | 322 g |
| Dimensi Pakej | 13.31 x 13.21 x 9.19 cm |
Waranti dan Sokongan
For detailed warranty information, please refer to the warranty card or documentation included with your product packaging.
If you require further assistance or have questions not covered in this manual, please contact ANMEATE customer support through their official webtapak atau maklumat hubungan yang diberikan dalam dokumentasi produk anda.




