Mount-It! MI-2752 Dual Monitor Arm Instruction Manual

pengenalan

Thank you for choosing the Mount-It! MI-2752 Dual Monitor Arm. This full-motion desk mount is designed to enhance your workspace by providing ergonomic positioning for two monitors, freeing up valuable desk space. This manual provides detailed instructions for safe installation, operation, and maintenance of your monitor arm.

Maklumat Keselamatan

• Kapasiti Berat: Do not exceed the maximum weight capacity of 19.8 lbs (9 kg) per monitor. Exceeding this limit may result in instability and potential injury.
• Saiz Monitor: This mount supports monitors from 13 to 32 inches. Ensure your monitors fit within this range.
• Keserasian VESA: Compatible with VESA patterns 75x75mm and 100x100mm. Verify your monitor's VESA pattern before installation.
• Ketebalan Meja: Untuk C-clamp installation, the desk thickness must be between 0.39 inches (10mm) and 3.3 inches (85mm). For grommet installation, the desk thickness must be between 0.39 inches (10mm) and 1.6 inches (40mm).
• Permukaan Pemasangan: Ensure the mounting surface (desk) is structurally sound and can support the combined weight of the mount and monitors. Do not install on drywall-only surfaces.
• Mata Cubit: Be aware of potential pinch points during assembly and adjustment. Keep hands clear of moving parts.
• Kanak-kanak: Jauhkan bahagian kecil daripada kanak-kanak.

Kandungan Pakej

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact Mount-It! customer support.

Image: All components of the Mount-It! MI-2752 Dual Monitor Arm laid out, including the pole, arms, VESA plates, C-clamp, grommet base, and hardware.

• Tiang Utama dengan Meja Clamp/Grommet Base
• Lengan Dwi Monitor
• Plat Monitor VESA (2x)
• Kit Perkakasan (skru, pencuci, sepana Allen)
• Klip Pengurusan Kabel

Persediaan dan Pemasangan

Follow these steps carefully for proper installation.

Step 1: Choose Mounting Option

The MI-2752 offers two installation methods: C-clamp or Grommet mount. Select the option suitable for your desk.

Image: A visual comparison of the C-clamp mounting option (left) and the grommet mounting option (right) for desk attachment.

• C-Clamp: Ideal for desks without a grommet hole. Attaches to the edge of the desk.
• Grommet: Utilizes an existing hole in your desk for a more flush installation.

Step 2: Attach Mount to Desk

Secure the main pole to your desk using the chosen method. Ensure it is tightened firmly to prevent movement.

Langkah 3: Pasang Plat VESA pada Monitor

Attach the VESA plates to the back of your monitors using the appropriate screws from the hardware kit. Ensure the screws are not overtightened to avoid damaging the monitor.

Langkah 4: Pasang Monitor ke Lengan

Slide the monitors (with VESA plates attached) onto the monitor arms. Secure them with the provided locking mechanism.

Imej: Dari dekat view of a monitor securely attached to one of the monitor arms, demonstrating the connection point.

Langkah 5: Pengurusan Kabel

Route monitor cables through the integrated cable management clips on the arms and pole for a tidy workspace.

Imej: A view of monitor cables neatly routed through the integrated cable management clips along the monitor arm and pole.

Arahan Operasi dan Pelarasan

The Mount-It! MI-2752 offers extensive adjustability for optimal viewkeselesaan.

Pelarasan Ketinggian

Monitors can be adjusted vertically along the main pole. Fine-tune individual monitor heights for perfect alignment using the adjustment screws on the VESA plate attachment points.

Image: A diagram illustrating the vertical height adjustment range of the monitor arm along the central pole, from 2.3 to 15.4 inches.

Condong, Pusing dan Putaran

Each monitor can be independently tilted, swiveled, and rotated to achieve your desired viewsudut ing.

• Condong: Adjust the screen angle +90°/-45° to reduce glare and optimize viewing.
• Pusing: Pivot the monitor 180° horizontally.
• Putaran: Putar monitor 360° untuk orientasi landskap atau potret.

Image: A diagram illustrating the tilt (+90°/-45°), swivel (±90°), and rotation (±180°) capabilities of the monitor arm.

Pelarasan Ketegangan

If a monitor sags or does not hold its position, adjust the tension of the gas spring arms. Use the provided Allen wrench to turn the hex bolt at the top of the arm. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors.

Penyelenggaraan

• Pembersihan: Lap pelekap dengan lembut, damp kain. Elakkan pembersih atau pelarut yang melelas.
• Pemeriksaan Berkala: Periksa semua skru dan sambungan secara berkala untuk memastikan ia kekal ketat dan selamat. Ketatkan semula jika perlu.
• Pelinciran: No lubrication is required for the moving parts.

Menyelesaikan masalah

Monitor Melorot atau Tidak Memegang Kedudukan

• Penyelesaian: Adjust the gas spring tension. Turn the hex bolt on the arm clockwise to increase tension until the monitor holds its position.

Mount is Unstable or Wobbles

• Penyelesaian: Pastikan meja clamp or grommet base is securely tightened to the desk. Check that all connections on the pole and arms are firm.

Monitors Are Not Level

• Penyelesaian: Use the fine-tuning height adjustment screws on the VESA plate attachment points to align the monitors.

Spesifikasi

Image: A detailed technical drawing showing the dimensions and various adjustment ranges of the Mount-It! MI-2752 Dual Monitor Arm.

Waranti dan Sokongan

The Mount-It! MI-2752 Dual Monitor Arm is backed by a lifetime warranty, reflecting our commitment to quality and durability. For technical assistance, installation questions, or warranty claims, please contact our US-based technical specialists. Our team is available to provide support before, during, and after your installation.

For further assistance, please visit the official Mount-It! webtapak atau hubungi perkhidmatan pelanggan secara terus.