1. Pengenalan
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the AKO AKO-15692 Three-Phase PROPlus Basic Electronic Control Panel with Defrost 10200W. Please read this manual thoroughly before installation and operation.
Rajah 1: Depan view of the AKO AKO-15692 control panel. This image displays the front of the AKO AKO-15692 control panel. On the left, a digital display shows '-19.4' with 'ECO' and defrost indicators. Below the display are navigation buttons (up, down, set, escape, power, question mark, light). The right side features a transparent hinged cover, revealing internal circuit breakers and a rotary switch.
2. Maklumat Keselamatan
Sentiasa patuhi langkah keselamatan berikut untuk mengelakkan kecederaan dan kerosakan pada peranti:
- Pemasangan dan penyelenggaraan mesti dilakukan oleh kakitangan yang berkelayakan sahaja.
- Disconnect power before performing any work on the control panel.
- Pastikan pembumian yang betul untuk mengelakkan kejutan elektrik.
- Do not expose the unit to moisture or extreme temperatures outside its operating range.
- Sahkan semua sambungan adalah selamat dan betul sebelum menggunakan kuasa.
3. Produk Lebihview
The AKO-15692 is a three-phase electronic control panel designed for refrigeration systems requiring defrost management. It integrates control, protection, and monitoring functions for optimal performance and energy efficiency.
Ciri-ciri Utama:
- Three-phase power compatibility (up to 10200W).
- Integrated defrost control.
- Digital display for temperature and status.
- User-friendly control interface.
- Robust enclosure for industrial environments.
4. Persediaan dan Pemasangan
4.1 Membongkar
Carefully unpack the control panel and inspect it for any signs of damage. Retain the packaging materials for future transport or storage.
4.2 Pemasangan
The unit is designed for screw-mounted installation. Choose a dry, well-ventilated location away from direct heat sources or excessive vibration. Ensure sufficient space for wiring and ventilation.
- Mark the mounting points on the wall using the panel's dimensions.
- Tebuk lubang yang sesuai dan masukkan palam dinding jika perlu.
- Secure the control panel to the wall using suitable screws.
4.3 Sambungan Elektrik
All electrical connections must comply with local and national electrical codes. Refer to the wiring diagram provided inside the panel cover for specific connections.
- Bekalan Kuasa: Connect the three-phase power supply to the designated terminals.
- Pemampat: Connect the compressor load to the appropriate output terminals.
- Defrost Heaters: Connect defrost heaters to their dedicated output terminals.
- Penderia: Connect temperature sensors to the specified input terminals.
- Pembumian: Ensure all grounding connections are properly made.
Warning: Incorrect wiring can lead to severe damage or electrical shock. Consult a qualified electrician if unsure.
5. Arahan Operasi
5.1 Menghidupkan/Mematikan
Tekan ke ⏻ (Power) button to turn the unit on or off. The digital display will illuminate upon power-on.
5.2 Paparan dan Navigasi
The digital display shows the current temperature or system status. Use the following buttons for navigation and settings:
- SET: Enter/confirm settings.
- ▲ (Atas): Increase values or navigate up.
- ▼ (Bawah): Decrease values or navigate down.
- ESC: Exit menu or cancel operation.
- ?: Access help or information.
- ☀︎ (Light): Control internal light (if applicable) or display brightness.
5.3 Menetapkan Suhu
- Tekan ke SET button. The current setpoint will flash.
- Gunakan ▲ or ▼ butang untuk melaraskan suhu yang dikehendaki.
- Tekan SET again to confirm the new setpoint.
5.4 Kitaran Penyahbekuan
The unit features automatic defrost control. Parameters such as defrost interval and duration can be configured through the settings menu. Consult the detailed programming section in the full manual for advanced configurations.
6. Penyelenggaraan
Regular maintenance ensures optimal performance and longevity of the control panel.
6.1 Pembersihan
- Putuskan sambungan kuasa sebelum membersihkan.
- Lap bahagian luar dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
- Pastikan tiada kelembapan memasuki komponen dalaman.
6.2 Pemeriksaan
Periksa perkara berikut secara berkala:
- Pendawaian: Periksa wayar yang longgar atau rosak.
- Terminal: Ensure all terminal connections are tight.
- Lampiran: Look for any signs of physical damage or corrosion.
- Pengudaraan: Pastikan bukaan pengudaraan bersih dan tidak terhalang.
7. Penyelesaian masalah
Bahagian ini membincangkan isu-isu biasa. Untuk masalah yang lebih kompleks, hubungi sokongan teknikal.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Panel tidak boleh dihidupkan. | No power supply; Blown fuse/tripped breaker. | Check main power supply; Inspect fuses/breakers and reset if necessary. |
| Bacaan suhu tidak betul. | Faulty sensor; Sensor incorrectly placed. | Check sensor connections; Verify sensor placement; Replace sensor if faulty. |
| Defrost not initiating. | Incorrect defrost settings; Defrost heater fault. | Review defrost parameters in settings; Check defrost heater and wiring. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Model | AKO-15692 |
| Jenama | AKO |
| Penarafan Kuasa | 10200W |
| fasa | Tiga fasa |
| Jenis Pemasangan | Dipasang skru |
| Fungsi Pencairan | Bersepadu |
9. Waranti dan Sokongan
9.1 Maklumat Waranti
AKO products are covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official AKO webtapak untuk terma dan syarat terperinci.
9.2 Sokongan Teknikal
For technical assistance, spare parts, or service inquiries, please contact AKO customer support. Have your model number (AKO-15692) and purchase date ready when contacting support.
Contact information (e.g., phone, email, website) can typically be found on the product packaging or the official AKO webtapak.
