Sanctuary Platinum Series- 2.0 CU FT Home & Office Safe User Manual

1. Produk Lebihview

The Sanctuary Platinum Series- 2.0 CU FT Home & Office Safe, model SA-PLAT2DP, is designed to provide superior protection for your valuable possessions. This safe combines advanced security features with a sophisticated design, making it suitable for both home and office environments. It is ideal for securing important documents, jewelry, and other valuables.

Ciri-ciri Utama:

• Fire Rated 120 minutes at 1,800° F for extensive heat protection.
• Waterproof for 7 days up to the handle, protecting contents from water damage.
• Electronic Lock Face with Illuminated Touchpad and Print Guard Technology for secure and easy access.
• California DOJ Approved, meeting specific security standards.
• Interior mounted lighting included for visibility inside the safe.

2. Maklumat Keselamatan

Please read and understand all safety instructions before operating your safe. Failure to follow these instructions may result in injury or damage to the safe or its contents.

• jangan store the override keys inside the safe. Keep them in a secure location away from the safe.
• jangan store flammable liquids or materials inside the safe.
• Ensure the safe is placed on a level, stable surface to prevent tipping.
• Keep the safe out of reach of children to prevent unauthorized access.
• Always verify the safe is securely locked before leaving it unattended.
• When moving the safe, use appropriate lifting techniques or equipment due to its weight (approximately 103.8 pounds).

3. Kandungan Pakej

Carefully unpack your safe and ensure all items are present. If any items are missing or damaged, please contact customer support.

• Sanctuary Platinum Series Safe (SA-PLAT2DP)
• Manual Pengguna
• Gantikan Kekunci (2)
• Mounting Hardware (bolts for securing)
• Removable Shelf (if applicable)

4. Persediaan

4.1. Membongkar dan Meletakkan

1. Remove all packaging materials from the safe.
2. Place the safe in your desired location. Ensure the surface is flat and capable of supporting the safe's weight.
3. Consider placing the safe in a discreet location for added security.

4.2. Pemasangan Bateri

The electronic lock requires batteries for operation. Use high-quality alkaline batteries for best performance.

1. Locate the battery compartment on the back of the electronic keypad.
2. Buka penutup petak bateri.
3. Insert the required number of batteries (typically 4 AA batteries), ensuring correct polarity (+/-).
4. Tutup penutup petak bateri dengan selamat.

4.3. Initial Opening

Your safe comes with override keys for initial access and in case of electronic lock malfunction.

1. Insert the override key into the keyhole, usually located behind the keypad cover or a small panel.
2. Turn the key clockwise (or as indicated) while simultaneously turning the safe handle to open the door.
3. Once open, remove the key and store it in a secure location away from the safe.

4.4. Anchoring the Safe (Optional)

For enhanced security, it is recommended to anchor the safe to a floor or wall using the provided mounting hardware.

1. Buka pintu selamat.
2. Locate the pre-drilled mounting holes on the bottom or back of the safe.
3. Position the safe and mark the drilling points on the floor or wall.
4. Drill pilot holes using an appropriate drill bit for your surface (wood, concrete, etc.).
5. Align the safe with the drilled holes and secure it using the provided anchor bolts. Tighten firmly.

5. Arahan Operasi

5.1. Menetapkan Kod Peribadi Anda

It is crucial to set your personal code immediately after initial setup. The factory default code (if any) should be changed.

1. With the safe door open, locate the red or green reset button on the inside of the door, near the hinge.
2. Press the reset button. You should hear a beep and/or see an indicator light on the keypad.
3. On the keypad, enter your desired new code (typically 3-8 digits).
4. Press the "ENTER" or "#" button to confirm.
5. Uji kod baharu dengan pintu terbuka untuk memastikan ia berfungsi dengan betul sebelum menutup peti besi.

5.2. Membuka Peti besi

1. Enter your personal code on the electronic keypad.
2. Press the "ENTER" or "#" button.
3. If the code is correct, you will hear a beep and the indicator light will turn green.
4. Within 5 seconds, turn the safe handle clockwise (or as indicated) to open the door.

5.3. Menutup dan Mengunci Peti besi

1. Tutup pintu peti keselamatan dengan kuat.
2. Turn the safe handle counter-clockwise (or as indicated) until it is fully engaged and the door is secured.
3. The safe is now locked. No code entry is required to lock the safe.

6. Penyelenggaraan

6.1. Penggantian Bateri

Replace batteries annually or when the low battery indicator light appears (if applicable), or if the keypad becomes unresponsive.

1. Open the safe using your code or the override key.
2. Locate and open the battery compartment.
3. Remove old batteries and dispose of them responsibly.
4. Insert new, high-quality alkaline batteries, ensuring correct polarity.
5. Tutup petak bateri.
6. Test the keypad operation.

6.2. Pembersihan

Bersihkan bahagian luar peti besi dengan lembut, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or keypad.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan Pelanggan

9.1. Maklumat Waranti

Sanctuary safes are manufactured to the highest quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Sanctuary webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.

9.2. Sokongan Pelanggan

If you have any questions, require assistance with setup, or encounter issues not covered in this manual, please contact Sanctuary customer support. Contact information can typically be found on the manufacturer's webtapak atau pada pembungkusan produk.

Untuk mendapatkan maklumat sokongan terkini, sila lawati: Sanctuary Product Page on Amazon