Produk Selesaiview
The Artika Vester LED Vanity Light (model VAN-VE-CR) is a modern, chrome-finished lighting fixture designed for indoor damp locations, such as bathrooms. It features integrated LED technology, offering 1900 lumens of bright, 3000K warm white light with a long lifespan of 50,000 hours. This fixture is dimmable and controlled via a remote.
Imej: Depan view of the Artika Vester LED Vanity Light, showcasing its chrome finish and linear design.
Persediaan dan Pemasangan
This section provides general guidelines for installing the Artika Vester LED Vanity Light. Professional installation is recommended. Always ensure the power supply is turned off at the circuit breaker before beginning any electrical work.
Alat yang Diperlukan (Tidak Termasuk):
- Pemutar skru (Phillips dan Kepala Rata)
- Pelucut Kawat
- Pita Elektrik
- Cermin Mata Keselamatan
- Voltage Penguji
Langkah Pemasangan:
- Matikan Kuasa: Locate the circuit breaker controlling the light fixture's power supply and switch it to the OFF position. Verify power is off using a voltage penguji.
- Keluarkan Lekapan Lama: Carefully remove any existing light fixture from the wall. Disconnect all wires and remove the mounting bracket.
- Pasang Pendakap Pelekap: Attach the new mounting bracket (supplied with the Vester light) to the electrical junction box on the wall using the provided screws. Ensure it is securely fastened.
- Sambungan Wayar: Connect the electrical wires from the fixture to the corresponding wires from the junction box. Typically, connect the black wire (live) from the fixture to the black wire from the junction box, the white wire (neutral) from the fixture to the white wire from the junction box, and the ground wire (bare copper or green) from the fixture to the ground wire from the junction box. Secure connections with wire nuts and electrical tape.
- Pasang Lekapan: Carefully align the Vester LED Vanity Light with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is flush against the wall and stable.
- Pulihkan Kuasa: Setelah lekapan dipasang dengan selamat, hidupkan semula kuasa pada pemutus litar.
No specific installation videos are available for this product. Please refer to the written instructions and consult a qualified electrician if you are unsure about any steps.
Arahan Operasi
The Artika Vester LED Vanity Light is designed for simple operation using its included remote control.
Fungsi Kawalan Jauh:
- Butang Kuasa: Press to turn the light ON or OFF.
- Dimming Buttons: Use the '+' and '-' buttons to increase or decrease the brightness level of the light. The Vester light is fully dimmable.
Ensure the remote control has working batteries and is pointed towards the light fixture for optimal response. The light operates at a fixed color temperature of 3000K (warm white).
Penyelenggaraan
The Artika Vester LED Vanity Light requires minimal maintenance due to its durable construction and long-lasting integrated LED components.
Pembersihan:
- Always turn off the power to the fixture at the circuit breaker before cleaning.
- Gunakan yang lembut, kering, atau sedikit damp cloth to wipe the exterior surfaces of the fixture.
- Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Do not spray cleaning solutions directly onto the fixture.
Komponen LED:
The LED light source in this fixture is integrated and not user-replaceable. With an average lifespan of 50,000 hours, regular replacement is not anticipated.
Menyelesaikan masalah
If you encounter issues with your Artika Vester LED Vanity Light, refer to the following common troubleshooting steps:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | Tidak ada kekuatan untuk perlawanan. | Check the circuit breaker and wall switch. Ensure power is ON. |
| Sambungan wayar longgar. | Turn off power at the breaker. Inspect wire connections inside the junction box and re-secure if loose. | |
| Bateri kawalan jauh mati. | Gantikan bateri dalam alat kawalan jauh. | |
| Cahaya berkelip atau malap tanpa diduga. | Suis dimmer tidak serasi. | Ensure you are using an LED-compatible dimmer switch. Consult a qualified electrician. |
| Sambungan wayar longgar. | Turn off power at the breaker. Inspect wire connections and re-secure. | |
| Alat kawalan jauh tidak bertindak balas. | Remote battery is dead or low. | Gantikan bateri kawalan jauh. |
| Obstruction between remote and fixture. | Ensure a clear line of sight between the remote and the light fixture. |
Jika langkah ini tidak menyelesaikan isu, sila hubungi sokongan pelanggan.
Spesifikasi
| Jenama | Artika |
| Nombor Model | VAN-VE-CR |
| Dimensi Produk | 27" L x 4.4" W x 4.4" H |
| Wattage | 21 Watt |
| Voltage | 120 Volt |
| Kecerahan | 1900 Lumen |
| Suhu Warna (CCT) | 3000K (Putih Hangat) |
| Indeks Paparan Warna (CRI) | 80 |
| Kehidupan Purata | 50,000 Jam |
| bahan | Keluli Aloi, Plastik |
| Jenis Pemasangan | Lekap di dinding |
| Kaedah Kawalan | Alat Kawalan Jauh |
| Penilaian Lokasi | Damp Location (Indoor) |
| UPC | 846979036677 |
Maklumat Waranti
Specific warranty details for the Artika Vester LED Vanity Light (VAN-VE-CR) are typically provided with the product packaging or available on the manufacturer's official website. Please retain your proof of purchase for warranty claims. For detailed information regarding warranty coverage, terms, and conditions, please refer to the documentation included with your product or visit the Artika webtapak.
Sokongan
For further assistance, technical support, or to inquire about replacement parts, please contact Artika customer service. You can typically find contact information on the manufacturer's webtapak atau dalam pembungkusan produk.
You may also visit the official Artika store on Amazon for product information and updates: Kedai Artika di Amazon
