Manual+

ANCEL AD530, BM200 Pro

ANCEL AD530 OBD2 Scanner and BM200 Pro Battery Monitor Instruction Manual

Comprehensive guide for the setup, operation, and maintenance of your ANCEL AD530 OBD2 Scanner and ANCEL BM200 Pro Battery Monitor.

pengenalan

This manual provides detailed instructions for using your ANCEL AD530 OBD2 Scanner and ANCEL BM200 Pro Battery Monitor. This package includes one (1) ANCEL AD530 Code Reader and one (1) ANCEL BM200 Pro Battery Monitor. Please read this manual thoroughly before operation to ensure proper use and to maximize the benefits of these diagnostic tools.

ANCEL AD530 OBD2 Scanner

1. Produk Lebihview

The ANCEL AD530 is a full-function OBD2 diagnostic tool designed for all vehicles. It provides comprehensive diagnostic capabilities to help identify and resolve vehicle issues efficiently.

ANCEL AD530 OBD2 Scanner displaying various diagnostic functions

Rajah 1: ANCEL AD530 displaying its full range of OBD2 functions, including reading and erasing DTCs, I/M readiness, live data stream, O2 sensor test, on-board monitor, EVAP system test, freeze frame, DTC lookup, vehicle information, battery test, and VIN information.

Fungsi utama termasuk:

  • Read & Erase DTCs: Retrieve and clear Diagnostic Trouble Codes.
  • I/M Readiness Test: Check emission-related systems' readiness status.
  • Strim Data Langsung: View data sensor masa nyata.
  • Ujian Sensor O2: Monitor and test oxygen sensors.
  • Ujian Monitor On-Board: Access results of on-board diagnostic monitoring tests.
  • Ujian Sistem EVAP: Initiate a test of the evaporative emission system.
  • Pegunkan Data Bingkai: View vehicle parameters recorded when an emission-related fault occurs.
  • Carian DTC: Built-in library for code definitions.
  • Maklumat Kenderaan: Dapatkan VIN, CIN dan CVN.
  • Ujian Bateri: Basic battery voltage periksa.

2. Persediaan dan Sambungan

To begin using the ANCEL AD530, connect it to your vehicle's OBD2 port. The port is typically located under the dashboard on the driver's side.

  1. Locate the 16-pin OBD2 Data Link Connector (DLC) in your vehicle.
  2. Plug the AD530's OBD2 cable into the vehicle's DLC.
  3. Peranti akan dihidupkan secara automatik.

3. Operating the ANCEL AD530

Navigate the AD530 using the directional buttons and the "OK" button. The "ESC" button returns to the previous menu, and the "I/M" button provides quick access to I/M Readiness status.

3.1. Emission Test Readiness (I/M Readiness)

ANCEL AD530 displaying I/M Readiness status for emission test

Rajah 2: The ANCEL AD530 showing the I/M Readiness screen, indicating the status of various emission monitors (e.g., IGN, MIS, FUEL, CCM, CAT, EVAP, O2S, AIR, HTR, EGR) with checkmarks for 'Ready' and crosses for 'Not Ready'.

This function checks if your vehicle's emission systems are ready for an inspection. A green checkmark indicates the monitor has completed its diagnostic cycle, while a red 'X' means it has not. This helps ensure your vehicle passes exhaust emission tests.

3.2. Membaca dan Membersihkan Kod Masalah

  1. From the main menu, select "OBDII" and press "OK".
  2. Choose "Read Codes" to view current, pending, and permanent Diagnostic Trouble Codes (DTCs).
  3. To clear codes, select "Erase Codes". Nota: Clearing codes will also clear freeze frame data and reset I/M readiness monitors. Ensure you have addressed the underlying issue before clearing codes.

3.3. Battery Health Status Check

ANCEL AD530 displaying real-time battery voltage graf

Rajah 3: The ANCEL AD530 showing a real-time graph of battery voltage, indicating normal and abnormal states with corresponding voltage ranges. This helps in monitoring the vehicle's battery health.

The AD530 can display real-time battery voltage, providing a quick assessment of your vehicle's battery health. This feature helps in identifying potential battery issues early.

ANCEL BM200 Pro Battery Monitor

1. Produk Lebihview

The ANCEL BM200 Pro is a wireless battery monitor designed to provide continuous, real-time monitoring of your vehicle's 12-volt lead-acid battery. It offers multiple test functions and features for comprehensive battery health management.

ANCEL BM200 Pro display unit showing various battery test functions

Rajah 4: The ANCEL BM200 Pro display unit illustrating its multi-test functions, including Battery Test, Cranking Test, Charging Test, Voltage Test, State of Health (SoH), State of Charging (SoC), and Temperature Display.

Key features and functions include:

  • Ujian Bateri: Assesses overall battery health.
  • Ujian Cranking: Evaluates the starting system performance.
  • Ujian Pengecasan: Monitors the alternator's charging output.
  • Voltage Ujian: Vol-masa nyatatage pemantauan.
  • State of Health (SoH) & State of Charging (SoC): Memberikan status bateri yang terperinci.
  • Paparan suhu: Monitors battery temperature.
  • 433MHz Wireless Transmission: Stable and convenient data transmission up to 70 feet.
  • Built-in Alarm Function: Alerts for abnormal battery conditions.
  • Two Charging Modes: Solar and Type-C for the display unit.
  • Reka bentuk kalis air IP67: Ensures durability in various conditions.
  • Bahan Kalis Api: Keselamatan yang dipertingkatkan.
  • Penggunaan Kuasa Rendah: Efficient operation with automatic connection.
  • Security Protection: Reverse connection, overheat, short circuit protection, and built-in fuse.
  • Built-in Shock Sensor: Automatic sleep mode to save power.

2. Pemasangan

Proper installation of the BM200 Pro monitor unit is crucial for accurate data collection and reliable wireless transmission.

Four steps for installing the ANCEL BM200 Pro battery monitor

Rajah 5: Visual guide for the four installation steps of the ANCEL BM200 Pro: 1. Connect black clip to negative terminal. 2. Connect red clip to positive terminal. 3. Stick the monitor unit onto the battery surface. 4. Place the display unit in front of the windshield.

  1. Sambungkan Negatif: Firmly connect the black clip of the monitor unit to the negative (-) pole of the vehicle battery.
  2. Sambung Positif: Firmly connect the red clip of the monitor unit to the positive (+) pole of the vehicle battery.
  3. Mount Monitor Unit: Stick the monitor unit onto the battery surface using the provided double-sided tape.
  4. Position Display Unit: Place the display unit in a suitable location on your dashboard, typically in front of the windshield, ensuring clear visibility and optimal wireless reception.

Petua Penting:

  • Ensure the device is securely installed for the first time. Loose installation may cause abnormal data capture and display.
  • Verify the RF signal icon in the upper right corner of the display. A visible RF symbol indicates the display is successfully connected to the monitor unit and is receiving real-time data. If the RF symbol does not appear, try restarting the display unit.

3. Operating the ANCEL BM200 Pro

The BM200 Pro continuously monitors your battery and transmits data wirelessly to the display unit. The display provides real-time information and alerts.

3.1. Battery Test Functions

The display unit shows various battery parameters:

  • Ujian Bateri: Provides an overall assessment of battery health, often displayed as a percentage (SoH).
  • Ujian Cranking: When the engine starts, the device automatically tests the cranking system, displays the cranking voltage, and determines if the starting process is abnormal.
  • Ujian Pengecasan: After the car starts, it monitors the charging system, displays the charging percentage in real-time, and assesses the alternator's working condition.
  • Voltage Ujian: Continuously monitors battery voltage, helping to predict potential battery maintenance issues.

3.2. Penghantaran Tanpa Wayar

ANCEL BM200 Pro showing 433MHz wireless transmission range

Rajah 6: The ANCEL BM200 Pro demonstrating its 433MHz wireless transmission capability, allowing stable data transfer between the battery monitor and the display unit over a distance of 30-70 feet.

The BM200 Pro utilizes 433MHz wireless transmission technology, offering a stable connection and convenient monitoring from a distance of 30 to 70 feet. This allows for effective battery monitoring even when outside the vehicle.

3.3. Built-in Alarm Function

ANCEL BM200 Pro alarm function indicating various abnormal conditions

Rajah 7: The ANCEL BM200 Pro's built-in alarm function, highlighting alerts for low voltage, low battery, high temperature, abnormal cranking, and abnormal charging, providing timely warnings for proactive maintenance.

The device provides timely automatic alerts for abnormal data, including:

  • Volum rendahtage
  • Bateri lemah
  • Suhu tinggi
  • Abnormal cranking
  • Pengecasan tidak normal

These alerts help ensure proactive maintenance and prevent unexpected battery failures.

3.4. Charging the Display Unit

ANCEL BM200 Pro display unit showing solar and Type-C charging options

Rajah 8: The ANCEL BM200 Pro display unit illustrating its two charging modes: solar charging via the integrated panel and Type-C charging (5V charger) for simultaneous power replenishment.

The BM200 Pro display unit supports two charging methods:

  • Pengecasan Suria: The integrated solar panel allows for continuous charging when exposed to sunlight.
  • Pengecasan Jenis-C: Connect a 5V Type-C charger for faster or indoor charging.

Penyelenggaraan

To ensure the longevity and optimal performance of your ANCEL AD530 and BM200 Pro, follow these maintenance guidelines:

  • Pembersihan: Gunakan yang lembut, damp cloth to clean the devices. Do not use abrasive cleaners or solvents.
  • Storan: Store the devices in a dry, cool environment away from direct sunlight and extreme temperatures.
  • Penjagaan Kabel: Avoid bending or crimping the OBD2 cable excessively.
  • BM200 Pro Monitor Unit: Ensure the battery clips are clean and free of corrosion for a good connection. The unit is IP67 waterproof, but avoid prolonged submersion.
  • BM200 Pro Display Unit: Pastikan panel solar bersih untuk pengecasan yang cekap.

Menyelesaikan masalah

If you encounter issues with your ANCEL AD530 or BM200 Pro, refer to the following common troubleshooting steps:

  • Device Not Powering On (AD530):
    • Ensure the OBD2 cable is securely connected to the vehicle's DLC.
    • Periksa volum bateri kenderaantage; the AD530 draws power from the vehicle.
  • No RF Signal on BM200 Pro Display:
    • Verify that the BM200 Pro monitor unit is correctly connected to the battery terminals.
    • Ensure the monitor unit is securely mounted and not obstructed.
    • Try restarting the display unit.
    • Confirm the display unit is within the 30-70 feet wireless transmission range of the monitor unit.
  • Inaccurate Readings (BM200 Pro):
    • Check for loose connections at the battery terminals.
    • Ensure the battery clips are clean and free of corrosion.
    • Verify the monitor unit is firmly attached to the battery.
  • Alarms Triggering Frequently (BM200 Pro):
    • If alarms for low voltage, low battery, high temperature, abnormal cranking, or charging are frequent, it indicates a potential issue with your vehicle's battery or charging system. It is recommended to have your vehicle's battery and charging system professionally inspected.

Spesifikasi

ANCEL AD530 OBD2 Scanner

  • paparan: LCD berwarna
  • Vol Operasitage: 9-18V DC (dari port OBD2 kenderaan)
  • Protokol yang disokong: OBDII/EOBD/CAN
  • Fungsi: Read/Clear DTCs, I/M Readiness, Live Data, O2 Sensor Test, On-Board Monitor Test, EVAP Test, Freeze Frame, DTC Lookup, Vehicle Info, Battery Test.

ANCEL BM200 Pro Battery Monitor

  • Keserasian Bateri: 12-Volt Lead-Acid Batteries
  • Penghantaran Tanpa Wayar: 433MHz
  • Julat penghantaran: 30-70 kaki (lebih kurang 9-21 meter)
  • Display Charging: Solar, Type-C (5V)
  • Penggunaan Kuasa: Approx. 2.3 mAh per hour
  • Perlindungan: IP67 Waterproof, Flame Retardant Material, Reverse Connection Protection, Overheat Protection, Short Circuit Protection, Built-in Fuse.
  • ciri-ciri: Built-in Alarm, Built-in Shock Sensor (Auto Sleep).
Vehicles compatible with ANCEL BM200 Pro 12-volt lead-acid batteries

Rajah 9: The ANCEL BM200 Pro is compatible with a wide range of vehicles equipped with 12-volt lead-acid batteries, including cars, SUVs, light trucks, RVs, travel trailers, pickups, motorcycles, forklifts, boats, and mowers.

Waranti dan Sokongan

ANCEL is committed to providing high-quality products and customer service. For any inquiries or support needs, please contact our professional online team.

  • Perkhidmatan Pelanggan: 24-hour reply within.
  • Pemulangan & Pertukaran: Polisi pemulangan dan pertukaran 30 hari.
  • Panduan Teknikal: Access to updated technical guidance.
  • Kemas Kini Perisian: Free software upgrades.

For further assistance, please visit the official ANCEL webtapak atau hubungi sokongan pelanggan mereka secara langsung.

Dokumen Berkaitan - AD530, BM200 Pro

Praview Manual Pengguna ANCEL AD530 Pro: Panduan Pengimbas & Penguji Bateri OBDII
Manual pengguna terperinci untuk ANCEL AD530 Pro, alat diagnostik automotif 2-dalam-1. Meliputi fungsi OBDII seperti membaca/membacaasinKod G dan ujian bateri kereta yang komprehensif termasuk engkolan, pengecasan dan ujian riak.
Praview ANCEL AD530 User Manual
User manual for the ANCEL AD530 vehicle diagnostic tool, covering safety precautions, general information about OBD II, using the tool's features like I/M readiness, BAT check, DTC lookup, diagnostics, updates, and feedback.
Praview ANCEL FX2000 User's Manual - Professional Automotive OBD II Diagnostic Tool
Comprehensive user manual for the ANCEL FX2000, a professional automotive OBD II diagnostic tool. This guide covers product features, connection, settings, diagnostic functions, system diagnosing, help resources, registration, software updates, FAQs, warranty, and customer service.
Praview ANCEL AS500 OBD-II Diagnostic Tool User Manual
Comprehensive user manual for the ANCEL AS500 OBD-II diagnostic scanner, covering safety precautions, general information about OBD-II, detailed instructions on using the tool's functions like DTC lookup, data stream, I/M readiness, freeze frame, O2 sensor tests, EVAP tests, vehicle information retrieval, software updates, and feedback.
Praview ANCEL AD530 Pro User's Manual
User's manual for the ANCEL AD530 Pro, a 2-in-1 OBDII and battery diagnostic tool. Learn about safety precautions, product specifications, tool description, and how to use its various functions like reading codes, erasing codes, I/M readiness, data stream, freeze frame, O2 sensor test, on-board monitor test, evap system test, and vehicle information.
Praview Manual Pengguna Monitor Bateri ANCEL BM200
Comprehensive user manual for the ANCEL BM200 Battery Monitor, detailing its specifications, functions, installation, app usage, and troubleshooting for 12V vehicle batteries.