Geekpure Whole House UV 6 GPM Water Filter System

1. Pengenalan

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your Geekpure Whole House UV 6 GPM Water Filter System. This system is designed to provide purified water for your entire home by utilizing ultraviolet light to neutralize harmful microorganisms without adding chemicals or altering water taste, odor, pH, or general chemistry.

Please read this manual thoroughly before installation and operation to ensure proper function and safety. Keep this manual for future reference.

2. Maklumat Keselamatan

WARNING: To reduce the risk of electric shock, do not expose this appliance to rain or moisture.

WARNING: Do not look directly at the UV lamp when it is illuminated. UV light can cause severe eye and skin damage.

• Always disconnect power before performing any maintenance or service on the system.
• Ensure the system is installed by a qualified professional in accordance with local plumbing and electrical codes.
• Jangan kendalikan UV lamp di luar ruang UV.
• Pastikan semua sambungan elektrik kering dan dilindungi daripada air.
• The system is designed for indoor use only. Protect from freezing temperatures.
• Ensure proper grounding of the electrical supply.

3. Apa yang ada di dalam Kotak

Your Geekpure Whole House UV Water Filter System package includes the following components:

• Stainless steel 304 UV Chamber
• UV Filter (3 pieces)
• Quartz Sleeve (3 pieces)
• Electronic Ballast with audible and visual alarm (1 piece)
• Cl tetapamps (3 keping)
• Manual Arahan

Imej: Selesaiview of the Geekpure Whole House UV Water Filter System components, including the stainless steel UV chamber, UV lamps, quartz sleeves, and electronic ballast.

Image: Detailed diagram showing the dimensions of the UV reactor chamber (20.4 inches / 51 cm), UV lamp (18 inches / 45 cm), and quartz sleeve (19.92 inches / 49.8 cm), along with labeled components like the stainless steel reactor chamber, quartz sleeve, filter, mounting clips, ballast, aluminum end cap, and silicone stopper.

Image: The Geekpure UV Water Filter System components laid out next to its packaging box, labeled "Geekpure UV-25F UV Water Filter".

4. Persediaan dan Pemasangan

4.1 Keperluan Pra-Pemasangan

• Tekanan Air Suapan: 40 - 100 PSI
• Suhu: 40-110°F (5-45°C)
• pH: 3.0 - 11.0
• TDS maks: 300 PPM
• Residual Chlorine: <0.1 mg/L
• Kekeruhan: <1.0 NTU
• Max SDI: <4.0
• Kekerasan: <5 GPG
• besi: <0.1
• Mangan: <0.05

Ensure your water supply meets these specifications for optimal performance and longevity of the system. Pre-filtration (sediment and carbon filters) is highly recommended before the UV system to protect the quartz sleeve and UV lamp from particles and chlorine, which can reduce UV effectiveness.

4.2 Installation Diagram (Recommended)

Image: A diagram illustrating the recommended installation sequence for the Geekpure UV Water Filter System. It shows the flow from Feed Water through a Whole House Water Filtration System, then into the Geekpure UV Filter System, and finally to Pure Water outlets. Key components like feed water control valve, inlet/outlet control valves for the UV system, tee connectors, and the ballast connection are depicted.

4.3 Langkah Pemasangan

1. Mount the UV Chamber: Securely mount the stainless steel UV chamber horizontally or vertically using the provided fixed clamps. Ensure there is enough space for future maintenance, especially for lamp and quartz sleeve replacement.
2. Sambung Paip: The UV chamber has 3/4 inch MNPT inlet/outlet connections. Connect your main water supply to the inlet and your household plumbing to the outlet. It is recommended to install shut-off valves on both sides of the UV system for easier maintenance. Use high-quality plumbing tape (e.g., PTFE tape) on all threaded connections to prevent leaks.
3. Install Quartz Sleeve: Carefully slide the quartz sleeve into the UV chamber. Handle with care as it is fragile. Ensure the O-rings are properly seated to create a watertight seal.
4. Pasang UV Lamp: Gently insert the UV lamp into the quartz sleeve. Do not touch the glass part of the lamp with bare hands; use gloves or a clean cloth. Connect the lamp pins to the electronic ballast connector.
5. Connect Ballast: Plug the electronic ballast into a standard 100-140V / 50-60Hz electrical outlet. The ballast features an audible and visual alarm to indicate lamp status.
6. Semak Kebocoran: Slowly turn on the water supply and check all connections for leaks. Address any leaks immediately by tightening connections or reapplying plumbing tape.
7. Siram Sistem: Allow water to flow through the system for several minutes to flush out any air or debris before using the treated water.

5. Mengendalikan Sistem

Once installed and powered, the Geekpure UV Water Filter System operates continuously, 24/7, to ensure consistent water purification. The UV lamp emits ultraviolet light that inactivates bacteria, viruses, and other microorganisms as water flows through the chamber.

• Ballast Indicator: The electronic ballast is equipped with a visual indicator (typically a green light) and an audible alarm. A steady green light indicates that the UV lamp is functioning correctly. If the light changes or an alarm sounds, it indicates a lamp failure or malfunction, requiring immediate attention.
• Operasi Berterusan: UV lamp is designed to operate continuously. Turning it off and on frequently can reduce its lifespan. Note that if water is not flowing for an extended period, the water inside the UV chamber may heat up slightly. This is normal and will dissipate once water flow resumes.

6. Penyelenggaraan

Regular maintenance is crucial for the effective and safe operation of your UV water filter system.

6.1 UV Lamp Penggantian

• UV lamp has an effective lifespan of approximately 9000 hours (approximately 1 year of continuous operation).
• Gantikan UV lamp annually, even if it appears to be working, as its germicidal effectiveness diminishes over time.
• To replace: Disconnect power, shut off water supply, drain the system, carefully remove the old lamp and quartz sleeve, clean the quartz sleeve (or replace if damaged), insert the new lamp, and reassemble.

6.2 Quartz Sleeve Cleaning and Replacement

• The quartz sleeve should be cleaned periodically (e.g., every 3-6 months) to remove any mineral deposits or film that can reduce UV light transmission.
• Use a soft cloth and a mild acid cleaner (like vinegar or citric acid solution) to clean the sleeve. Rinse thoroughly with clean water.
• Replace the quartz sleeve if it is cracked, scratched, or cannot be cleaned effectively.

6.3 System Bleach Flush

• Periodically flushing the system with a bleach solution can help sanitize the plumbing downstream of the UV unit and prevent biofilm buildup.
• Consult a plumbing professional or local water treatment guidelines for appropriate bleach concentrations and flushing procedures.

7. Penyelesaian masalah

8. Spesifikasi

8.1 Water Quality Specifications

• Tekanan Air Suapan: 40 - 100 PSI
• Suhu: 40-110°F (5-45°C)
• pH: 3.0 - 11.0
• TDS maks: 300 PPM
• Residual Chlorine: <0.1 mg/L
• Kekeruhan: <1.0 NTU
• Max SDI: <4.0
• Kekerasan: <5 GPG
• besi: <0.1
• Mangan: <0.05

9. Waranti & Sokongan

9.1 Maklumat Waranti

The Geekpure Whole House UV 6 GPM Water Filter System comes with a Waranti terhad 1 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service. It does not cover damage resulting from improper installation, misuse, neglect, freezing, accident, or unauthorized repair.

Sila simpan bukti pembelian anda untuk tuntutan waranti.

9.2 Sokongan Pelanggan

For technical assistance, troubleshooting, or to inquire about replacement parts, please contact Geekpure Customer Service. Refer to the contact information provided on the product packaging or the official Geekpure webtapak.

When contacting support, please have your product model number (GP-UV25W) and date of purchase readily available.