Manual Pengguna Suis Ethernet Desktop Tidak Terurus YuanLey 8 Port 2.5G dengan SFP 10G

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch with 10G SFP. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Kandungan Pakej

Sahkan bahawa pakej anda mengandungi item berikut:

• 1 x YuanLey 8 Port 2.5G Ethernet Switch
• 1 x Kuasa Kuasa
• 1 x Manual Pengguna

3. Ciri-ciri Produk

• 9 Port Configuration: Includes 8 x 2.5 Gigabit Ethernet ports and 1 x 10G SFP+ Port.
• Prestasi Kelajuan Tinggi: Delivers 2.5 times faster network performance than traditional Gigabit switches, with a switching capacity of up to 60Gbps.
• Pasang dan Main: Unmanaged design requires no configuration for immediate use.
• Durable and Quiet: Features a metal case with 6KV lightning protection and a fanless design for silent operation.
• Suhu Operasi Lebar: Functions reliably in temperatures ranging from -10°C to 50°C.
• Peletakan Serbaguna: Supports both wall mount and desktop placement.

4. Produk Lebihview

Figure 4.1: YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch

Rajah 4.2: Panel Hadapan Atasview with Ports and Indicators

The switch features 8 RJ45 ports supporting 10/100/1000Mbps/2.5G adaptive speeds and 1 SFP+ port for 1G/2.5G/10G fiber connections. LED indicators provide status for power and link activity.

Rajah 4.3: Panel Belakang Atasview dengan Input Kuasa

Rajah 4.4: Terperinci View of Ports and Indicators

The rear panel includes the DC 12V/1.0A power input port and a grounding screw for electrical safety. The front panel LEDs indicate power status, 2.5Gbps link speed (orange), and 100/1000Mbps link speed (green) for RJ45 ports, and link status for the SFP+ port.

5. Persediaan

Follow these steps to set up your YuanLey Ethernet Switch:

1. Sambungkan Kuasa: Plug the provided power adapter into the DC 12V/1.0A input port on the rear of the switch, then plug the adapter into a power outlet. The PWR LED on the front panel will illuminate green.
2. Sambungkan Peranti Ethernet: Connect your network devices (e.g., computers, NAS, WiFi 6 APs, gaming PCs) to the 2.5G Base-T ports (1-8) using standard Ethernet cables (Cat5e or higher recommended for 2.5G speeds). The corresponding port LEDs will light up to indicate a successful connection and speed.
3. Connect SFP+ Module (Optional): If using the 10G SFP+ port, insert a compatible 1G/2.5G/10G SFP/SFP+ module (not included) into the SFP+ slot. Then, connect a fiber optic cable or DAC cable to the module. The SFP indicator LED will light up when a link is established.

Figure 5.1: Typical Network Setup with the YuanLey Switch

6. Mengendalikan Suis

The YuanLey 2.5G Unmanaged Ethernet Switch is designed for simple plug-and-play operation. Once powered on and connected to your network devices, it will automatically detect the link speed and establish connections without any further configuration.

• Penunjuk LED: Observe the PWR, L1-L8, and SFP+ Link LEDs to monitor the switch's status and network activity.
• MDI/MDIX Automatik: The switch supports Auto MDI/MDIX, eliminating the need for crossover cables.
• Adaptive Speed: RJ45 ports automatically adapt to 10/100/1000Mbps or 2.5Gbps.

7. Penyelenggaraan

To ensure optimal performance and longevity of your switch, consider the following maintenance guidelines:

• penempatan: Place the switch in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture. The fanless design relies on natural convection for cooling.
• Pembersihan: Bersihkan bahagian luar suis secara berkala dengan kain lembut dan kering. Elakkan menggunakan pembersih cecair atau aerosol.
• Pengurusan Kabel: Pastikan kabel rangkaian disusun dengan kemas dan tidak terlalu bengkok atau tegang.
• Bekalan Kuasa: Use only the original power adapter provided with the switch.

Figure 7.1: Fanless Design and Environmental Considerations

8. Penyelesaian masalah

If you encounter issues with your switch, refer to the following common problems and solutions:

• Tiada Kuasa:
  • Pastikan penyesuai kuasa disambungkan dengan selamat pada suis dan soket kuasa yang berfungsi.
  • Check if the PWR LED is illuminated. If not, try a different power outlet.
• Tiada Pautan/Aktiviti di Pelabuhan:
  • Sahkan bahawa kabel Ethernet disambungkan dengan selamat ke kedua-dua port suis dan peranti rangkaian.
  • Cuba kabel Ethernet yang berbeza.
  • Pastikan peranti yang disambungkan dihidupkan dan berfungsi dengan betul.
  • Check the LED indicator for the specific port. If it's off, there might be no link.
• Kelajuan Rangkaian Perlahan:
  • Ensure all devices in the network path (NICs, cables, routers) support 2.5G speeds to achieve maximum performance.
  • Use Cat5e or higher-rated Ethernet cables for 2.5G connections.
  • Check the color of the port LED: Orange indicates 2.5Gbps, Green indicates 100/1000Mbps.
• SFP+ Port Issues:
  • Ensure the SFP/SFP+ module is correctly inserted and compatible with the switch.
  • Verify the fiber optic or DAC cable is properly connected and undamaged.
  • Check the SFP indicator LED for link status.

9. Spesifikasi

Rajah 9.1: Dimensi Produk

10. Waranti dan Sokongan

YuanLey products are designed for reliability and performance. For warranty information and technical support, please refer to the official YuanLey webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan resit pembelian anda untuk tuntutan waranti.

Untuk bantuan lanjut, anda boleh melawati YuanLey Store on Amazon.