1. Produk Lebihview
The Ferm AX-Power 20V Quick Charger (Model CDA1175) is designed for rapid and efficient charging of Ferm AX-Power 20V Li-ion batteries. This charger is compatible with 1.5 Ah, 2.0 Ah, and 4.0 Ah AX-Power battery packs, ensuring your tools are ready for use with minimal downtime.
Ciri-ciri utama termasuk:
- Suitable for rechargeable Li-ion batteries.
- Compatible with Ferm AX-Power 20V tools.
- Fast charging: approximately 40 minutes for a 2.0 Ah battery.
- Fast charging: approximately 1 hour for a 4.0 Ah battery.
- Integrated LED indicator for charging status.
- Masukan voltage: 100-240 V, 50-60 Hz.
Imej 1: Depan view of the Ferm AX-Power 20V Quick Charger, showing the battery slot and LED indicators.
2. Arahan Keselamatan
Baca semua amaran dan arahan keselamatan dengan teliti sebelum menggunakan pengecas. Kegagalan mematuhi amaran dan arahan boleh mengakibatkan renjatan elektrik, kebakaran dan/atau kecederaan serius.
Keselamatan Am
- Penggunaan Dalaman Sahaja: This charger is designed for indoor use. Do not expose it to rain or wet conditions.
- Keselamatan Elektrik: Pastikan voltan salur keluar kuasatage matches the charger's specifications (100-240V, 50-60Hz). Do not use damaged cords or plugs.
- Elakkan Terlalu Panas: Do not cover the charger during operation. Ensure adequate ventilation.
- Kanak-kanak dan Penonton: Keep children and untrained persons away from the charger and charging area.
- Pemeriksaan: Before each use, inspect the charger, cable, and plug for any damage. Do not use a damaged charger.
- Cabut plag Apabila Tidak Digunakan: Sentiasa tanggalkan plag pengecas daripada soket kuasa apabila tidak digunakan atau sebelum membersihkan.
Battery Specific Safety
- Bateri serasi: Only charge Ferm AX-Power 20V Li-ion batteries with this charger. Charging other battery types may cause personal injury and damage.
- Keadaan Bateri: Do not attempt to charge non-rechargeable batteries or visibly damaged batteries.
- Suhu: Charge batteries within the recommended temperature range (typically 0°C to 40°C).
- Pelupusan: Dispose of batteries and chargers responsibly according to local regulations. Do not dispose of batteries in fire.
3. Kandungan Pakej
Sila semak kandungan bungkusan selepas diterima untuk memastikan semua item ada dan tidak rosak:
- 1 x Ferm AX-Power 20V Quick Charger (Model CDA1175)
- 1 x Kabel Kuasa
- 1 x Manual Arahan (dokumen ini)
Image 2: Product packaging, indicating the quick charger and its compatibility.
4. Persediaan
Follow these steps to set up your Ferm AX-Power 20V Quick Charger:
- Bongkar: Tanggalkan pengecas dan semua aksesori daripada pembungkusan dengan berhati-hati.
- penempatan: Place the charger on a stable, flat, and dry surface. Ensure it is away from direct sunlight, heat sources, and moisture.
- Sambungkan Kuasa: Insert the power cable into the charger's input port, then plug the other end into a suitable 100-240V, 50-60Hz electrical outlet.
Image 3: The Ferm AX-Power 20V Quick Charger connected to its power cord.
5. Arahan Operasi
Mengecas Bateri
- Pastikan pengecas disambungkan dengan betul kepada sumber kuasa.
- Align the Ferm AX-Power 20V Li-ion battery with the charger slot and slide it in until it clicks securely into place.
- Observe the LED indicator on the charger:
- LED Merah: Menunjukkan bahawa bateri sedang dicas.
- LED hijau: Menunjukkan bahawa bateri telah dicas sepenuhnya.
- Once the green LED illuminates, the battery is fully charged. Disconnect the battery from the charger by pressing the release button (if present) and sliding it out.
- Unplug the charger from the power outlet when charging is complete or if the charger will not be used for an extended period.
Image 4: The Ferm AX-Power 20V Quick Charger with the battery slot ready for battery insertion.
Anggaran Masa Pengecasan
- For a 2.0 Ah AX-Power 20V Li-ion battery: Approximately 40 minutes.
- For a 4.0 Ah AX-Power 20V Li-ion battery: Approximately 1 hour.
Actual charging times may vary based on battery condition, ambient temperature, and power supply.
6. Penyelenggaraan
Proper maintenance ensures the longevity and safe operation of your charger:
- Pembersihan: Disconnect the charger from the power supply before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners, solvents, or immerse the charger in water.
- Storan: Store the charger in a clean, dry place, away from direct sunlight and extreme temperatures.
- Penjagaan Kabel: Do not wrap the power cable tightly around the charger. Avoid kinking or damaging the cable.
7. Penyelesaian masalah
Jika anda menghadapi masalah dengan pengecas anda, rujuk kepada masalah dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Charger not powering on / No LED indication | No power supply; Damaged power cable/plug; Faulty outlet. | Check power connection; Try a different outlet; Inspect cable for damage. |
| Battery not charging (Red LED not on) | Battery not properly inserted; Battery is faulty; Battery is not compatible. | Ensure battery is fully seated; Test with a different compatible battery; Verify battery type. |
| Charger or battery gets excessively hot | Poor ventilation; Damaged battery/charger. | Ensure charger is in a well-ventilated area; Discontinue use and contact support if overheating persists. |
If the problem persists after attempting these solutions, please contact Ferm customer support.
8. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Jenama | Ferm |
| Nombor Model | CDA1175 |
| Input Voltage | 100-240 V |
| Kekerapan Input | 50-60 Hz |
| Arus Keluaran | 2 A |
| Jenis Bateri yang Serasi | 20V Li-ion AX-Power Batteries |
| Masa Pengecasan (2.0 Ah) | lebih kurang 40 minit |
| Masa Pengecasan (4.0 Ah) | lebih kurang 1 jam |
9. Waranti dan Sokongan
This Ferm AX-Power 20V Quick Charger typically comes with a Waranti 2 tahun from the date of purchase. Please refer to your purchase receipt or warranty card for specific terms and conditions.
For technical support, warranty claims, or spare parts information, please contact Ferm customer service through their official website or the contact details provided with your product documentation. Keep your proof of purchase for warranty validation.
