BINGFU BFN00866

Bingfu 20-1300MHz Police Scanner Antenna User Manual

Model: BFN00866

pengenalan

This manual provides instructions for the proper installation, operation, and maintenance of your Bingfu 20-1300MHz Police Scanner Antenna. This antenna is designed for broad frequency reception, compatible with various public radio scanners, ham radios, and two-way radio systems. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

Two Bingfu 20-1300MHz Police Scanner Antennas with magnetic bases and BNC connectors

Image: Two Bingfu 20-1300MHz Police Scanner Antennas. Each antenna features a flexible whip, a magnetic base, and a coaxial cable terminating in a BNC male connector.

Ciri-ciri Produk

Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

Spesifikasi

Julat Kekerapan20MHz - 1300MHz
Keuntungan7dBi
VSWR<2.0
Impedans50 Ohm
ArahOmni-arah
Panjang Kabel3m / 10 kaki
Antena PenyambungLelaki BNC
Mounting Base Diameter45mm / 1.8 inci
Ketinggian Antena33cm / 13 inci
Suhu Operasi-20°C ~ +80°C
Suhu Penyimpanan-30°C ~ +85°C
Nombor ModelBFN00866
Diagram showing antenna dimensions: 33cm (13 inches) height, 4.6cm (1.8 inches) base diameter, and 3m (10 feet) cable length.

Image: Detailed dimensions of the antenna, including its height, base diameter, and cable length.

Persediaan

  1. Pilih Lokasi Pemasangan: Select a flat, metallic surface for the magnetic base. For optimal reception, a high, unobstructed location is recommended, such as a vehicle roof or a metal filing cabinet. Ensure the surface is clean and dry to maximize magnetic adhesion.
  2. Bingfu antenna mounted on the roof of a moving red pickup truck, with blue signal waves emanating from it.

    Image: Antenna mounted on a vehicle roof, illustrating a typical outdoor installation.

  3. Selamatkan Antena: Place the magnetic base firmly onto the chosen metallic surface. The strong magnet will hold the antenna in place.
  4. Laluan Kabel: Carefully route the 3-meter (10-foot) coaxial cable to your radio device, avoiding sharp bends or pinching that could damage the cable.
  5. Sambung ke Peranti: Attach the BNC male connector at the end of the cable to the BNC female antenna input port on your compatible radio scanner or ham radio. Ensure a secure connection by twisting the connector until it locks into place.
  6. Diagram showing a BNC male connector being attached to a BNC female port on a ham radio device.

    Image: Illustration of connecting the BNC male connector to a radio device.

Arahan Operasi

Once the antenna is securely installed and connected to your radio device, power on your device and begin scanning or tuning to desired frequencies within the 20MHz to 1300MHz range. The omni-directional design allows for reception from various directions without needing to reorient the antenna.

Car interior showing a radio receiver on the dashboard with the Bingfu antenna mounted on the vehicle's exterior, suggesting improved signal reception.

Image: Antenna in use with a car radio, demonstrating enhanced channel reception.

Peranti Serasi

This antenna is compatible with a wide range of radio scanners and ham radios, including but not limited to:

Penyelenggaraan

To ensure the longevity and optimal performance of your antenna, follow these maintenance guidelines:

Menyelesaikan masalah

If you experience issues with your antenna, consider the following troubleshooting steps:

Two images: one of a truck driver using a two-way radio, and another of a car driver using a radio, both implying improved signal reliability with the antenna.

Image: Demonstrating consistent signal reception for mobile radio users.

Waranti dan Sokongan

Specific warranty details are not provided in this manual. For information regarding warranty coverage, returns, or technical support, please contact the seller or manufacturer directly through their official channels. You may also visit the BINGFU Store on Amazon untuk maklumat produk tambahan dan pilihan hubungan.

Dokumen Berkaitan - BFN00866

Praview Bingfu RF Connector Usage Guidelines
Concise guidelines for the proper installation and use of Bingfu RF connectors to ensure optimal performance and longevity.
Praview Budget DIY GPS/GNSS Base Station / Receiver Setup With ESP32 and UM980
Learn how to build a cost-effective DIY GPS/GNSS base station or receiver using the ESP32 microcontroller and Unicorecomm UM980 module. This guide covers hardware, firmware, and configuration for creating a custom high-precision location system.
Praview Produktliste und Preise für Elektronik und Zubehör
Umfassende Liste von Elektronikprodukten und Zubehör mit detaillierten Preisinformationen. Entdecken Sie eine breite Palette von Marken und Artikeln, von Kopfhörern und Lautsprechern bis hin zu Computern und Mobiletelefonzubehör.