Domus Line 2011619

Domus Line Recessed Housing for Call Me Remote Control

Model: 2011619

Produk Selesaiview

The Domus Line Recessed Housing Kit is an essential accessory designed for the 'Call Me' remote control. This kit provides a clean and integrated solution for installing both round and square 'Call Me' remote controls flush with a surface, ensuring a seamless aesthetic. It is crafted from durable plastic with a stainless steel effect finish, blending well with various interior designs.

Domus Line Recessed Housing Kit, showing both round and square components.

This image displays the two components of the Domus Line recessed housing kit: one round housing and one square housing, both in a stainless steel effect finish.

Ciri-ciri

Kandungan Pakej

The Domus Line Recessed Housing Kit includes the following components:

Spesifikasi

JenamaTalian Domus
PengeluarTALIAN DOMUS
Nombor Model2011619
ASINB0C4V26LTJ
Dimensi Produk (L x W x H)4.5 x 3.2 x 1.8 cm (45L x 32W x 18H millimeters)
Berat Barang2 Kilogram
warnaKesan Keluli Tahan Karat
bahanPlastik, Keluli Tahan Karat
GayaTetapkan
Bilangan Item1 (kit containing two housings)
Kaedah KawalanRemote Control (for the device it houses)
Sumber KuasaElectric Cable (for the device it houses)
Negara AsalJerman

Persediaan dan Pemasangan

This section provides instructions for properly installing the Domus Line Recessed Housing.

  1. Pilih Lokasi: Select a suitable flat surface for installation, ensuring there is sufficient depth behind the surface for the housing (minimum 14 mm recess depth).
  2. Sediakan Pembukaan: Using appropriate tools, create a circular opening with a diameter of 40 mm (1.57 inches) in the chosen surface. Ensure the cut is clean and precise for a snug fit.
  3. Masukkan Perumahan: Gently push the desired recessed housing (round or square) into the prepared opening until its outer flange sits flush with the surface. The housing is designed to be held in place by friction.
  4. Insert Remote Control: Once the housing is securely in place, insert your 'Call Me' remote control into the housing. Ensure it fits snugly and is oriented correctly.
Technical drawing of the square recessed housing with dimensions.

This technical drawing illustrates the dimensions of the square recessed housing. Key measurements include a 46mm side length for the outer frame and a 40mm mounting diameter for the circular opening.

Technical drawing of the round recessed housing with dimensions.

This technical drawing illustrates the dimensions of the round recessed housing. Key measurements include a 46mm outer diameter and a 40mm mounting diameter for the inner opening.

Arahan Operasi

The Domus Line Recessed Housing is a passive component designed to hold a 'Call Me' remote control. It does not require any active operation itself. Once the remote control is placed within the housing, operate the remote control as per its own manufacturer's instructions.

Penyelenggaraan

To ensure the longevity and appearance of your recessed housing:

Menyelesaikan masalah

This section addresses common issues you might encounter during installation or use.

Waranti dan Sokongan

For information regarding warranty coverage, technical support, or replacement parts, please contact Domus Line customer service directly. Refer to the product packaging or the official Domus Line weblaman web untuk maklumat hubungan.

You may also refer to the product listing on Amazon.com.be for additional support information or to contact the seller.

Sumber Dalam Talian: Product Page on Amazon.com.be