Allsmartlife 1x2 FT LED Flat Panel Light User Manual

1. Maklumat Keselamatan

Sila baca arahan ini dengan teliti sebelum pemasangan dan penggunaan. Simpan manual ini untuk rujukan pada masa hadapan.

• Keselamatan Elektrik: Always turn off power at the circuit breaker before installing, servicing, or cleaning the fixture. Ensure all electrical connections comply with local codes and ordinances. If you are unsure about wiring, consult a qualified electrician.
• Pengendalian: Handle the LED panel light with care to avoid damage. Do not apply excessive force.
• Persekitaran: This fixture is suitable for indoor use and can be used in wet environments. Ensure the installation location is structurally sound to support the fixture's weight.
• Pengudaraan: Pastikan pengudaraan yang mencukupi di sekeliling lekapan untuk mengelakkan terlalu panas.

2. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Allsmartlife 1x2 FT LED Flat Panel Light (2 units)
• Pendakap Pelekap
• Installation Hardware (screws, drywall anchors, wire caps)
• Safety Rope(s)
• Manual Pengguna

Imej: Selesaiview of the LED panel light and included mounting hardware.

3. Ciri-ciri Produk

• Sangat Cerah: 24W, 2880 Lumens, with 240 LED lamp beads for stable and bright illumination.
• Selectable 5CCT: Easily adjust color temperature between 3000K (Warm White), 3800K (Neutral White), 4500K (Bright White), 5200K (Daylight White), and 6000K (Cool White) using a switch on the fixture.
• Boleh dimalapkan dengan lancar: Compatible with Triac dimmers for 10-100% smooth dimming at standard 120V.
• Prestasi Tinggi: Energy-efficient LED technology saves up to 85% on electricity compared to traditional lighting.
• Reka Bentuk Ultra Nipis: With a thickness of only 0.98 inches, the edge-lit panel fits closely to the ceiling for a sleek appearance.
• Pembinaan Tahan Lama: Features a strong and durable aluminum housing with high heat dissipation. Sealed design prevents insects from entering and allows for use in wet environments.

Image: Visual representation of the 5 selectable color temperatures and the switch for adjustment.

Image: Illustration of the smooth dimming capability from 10% to 100%.

4. Spesifikasi

5. Arahan Pemasangan

The Allsmartlife 1x2 FT LED Flat Panel Light supports three types of installation: Surface Mount, Drop Mount, and Recessed Mount. Always ensure power is OFF at the circuit breaker before starting installation.

Imej: Selesaiview of the three available installation methods.

5.1. Pemasangan Surface Mount

1. Prepare the Mounting Frame: The light fixture comes with a mounting frame attached. Carefully detach the frame from the light panel by cutting any zip ties or releasing klip.
2. Mount the Frame: Position the mounting frame on the ceiling where the fixture will be installed. Mark the screw holes. Use an electric drill to create pilot holes and secure the frame to the ceiling using the provided screws and drywall anchors (if necessary).
3. Sambungan Pendawaian: Pull the electrical wires from the ceiling junction box through the center opening of the mounting frame. Connect the live (black), neutral (white), and ground (green/bare copper) wires from the ceiling to the corresponding wires on the LED driver using the provided wire caps.
4. Pasangkan Tali Keselamatan: Connect the safety rope from the light panel to the hooks on the mounting plate to prevent accidental drops during final installation.
5. Secure Light Panel: Carefully slide the LED panel light onto the mounting frame, ensuring it locks securely into place.
6. Ujian: Pulihkan kuasa pada pemutus litar dan uji lekapan lampu.

Image: Detailed steps for surface mount installation.

5.2. Drop Mount Installation

A suspension kit is required for drop mount installation (not included in the standard package). Ensure the ceiling can support the suspended weight.

1. Install Suspension Cables: Drill holes in the ceiling at appropriate spacing (e.g., 36-37 inches apart for a 1x4FT light, adjust for 1x2FT). Install the base of the suspension cables into the ceiling.
2. Kabel Benang: Thread the lanyard (suspension wire) into the nut and stretch the rope. Adjust the length of the lanyard as desired.
3. Sambungan Pendawaian: Connect the electrical wires from the ceiling to the LED driver as described in the Surface Mount section.
4. Attach Light Panel: Pass the suspension ropes through the hooks on the light fixture. Secure the light panel to the suspension cables, ensuring it hangs level.
5. Ujian: Restore power and test the light fixture.

Image: Detailed steps for suspension mount installation.

5.3. Pemasangan Lekapan Tersembunyi

This method is suitable for ceilings with existing openings or grid systems.

1. Sediakan Siling: Turn off power. Remove the existing ceiling tile or prepare the opening for the fixture.
2. Sambungan Pendawaian: Connect the power cord from the ceiling to the LED driver.
3. Sisipkan Lekapan: Tilt the light panel and insert it through the ceiling gap. Carefully position it within the grid or opening.
4. Lekapan Selamat: Ensure the fixture is securely seated within the ceiling grid.
5. Ujian: Restore power and test the light fixture.

Image: Detailed steps for recessed mount installation.

5.4. Video Pemasangan

6. Arahan Operasi

6.1. Color Temperature Selection (5CCT)

The LED panel light features a selectable color temperature switch located on the side of the fixture. Before or after installation, you can use this switch to choose your preferred light color:

• 3000K: Putih Hangat
• 3800K: Putih Neutral
• 4500K: Putih Cerah
• 5200K: Siang Putih
• 6000K: Putih Sejuk

Simply slide the switch to the desired setting. The change will be immediate.

Image: The LED panel light installed in a kitchen, showcasing various color temperature options.

6.2. Fungsi Peredupan

This fixture is compatible with Triac dimmers (not included). To utilize the dimming feature, ensure you have a compatible dimmer switch installed in your electrical circuit. The light can be smoothly dimmed from 10% to 100% brightness.

7. Penyelenggaraan

• Pembersihan: Ensure the power is off before cleaning. Use a soft, damp cloth to wipe the surface of the fixture. Avoid abrasive cleaners or solvents that may damage the finish.
• Tiada Penggantian Mentol: This LED fixture does not require bulb replacement. The integrated LEDs are designed for a long lifespan of 50,000 hours.
• Pemeriksaan: Periksa lekapan secara berkala untuk sebarang tanda kerosakan atau sambungan yang longgar. Jika terdapat sebarang masalah, matikan kuasa dan berunding dengan juruelektrik yang berkelayakan.

8. Penyelesaian masalah

9. Waranti dan Sokongan

Allsmartlife products are designed for quality and reliability. For warranty information, technical support, or any product-related inquiries, please contact Allsmartlife customer service.

• E-mel Perkhidmatan Pelanggan: cs@allsmartlife.com
• Masa Respons: Allsmartlife aims to respond to inquiries within 12 hours.