1. Pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your BitFenix Nova Mesh mATX ARGB PC Case. Please read this guide thoroughly before beginning assembly to ensure proper setup and optimal performance. Keep this manual for future reference.
2. Produk Lebihview
The BitFenix Nova Mesh mATX ARGB PC Case is designed for high airflow and aesthetic appeal, featuring pre-installed ARGB fans and support for various PC components. Its compact mATX form factor makes it suitable for efficient builds.
Imej: Depan view of the BitFenix Nova Mesh mATX ARGB PC Case, highlighting its dimensions (385mm H x 205mm W x 400mm D), three 120mm ARGB fans, and the included 4+4 ARGB controller.
Ciri-ciri Utama:
- Reka Bentuk Aliran Udara Tinggi: Mesh front panel for optimal ventilation.
- Pre-installed ARGB Fans: Three 120mm ARGB fans included with a built-in ARGB LED/PWM system controller.
- Keserasian Komponen: Supports Micro ATX and Mini ITX motherboards.
- GPU Support: Accommodates graphics cards up to 345mm in length.
- CPU Cooler Support: Air coolers up to 160mm in height.
- Sokongan PSU: Power supplies up to 180mm in length.
- Sokongan Radiator: Top: 240mm (thickness up to 27mm, fans up to 25mm thick with memory height up to 38mm). Front: 240mm/280mm. Rear: 120mm.
- Pilihan Storan: Modular HDD cage with 3+1 2.5" SSD mounts and 2 x 3.5" HDD trays.
- Pengurusan Kabel: 25mm space behind the motherboard tray.
- Panel Sisi Kaca Terbaja: 4mm screw-free tempered glass for easy access and aesthetics.
- Penapisan Habuk: Removable front panel, PSU dust filter at the bottom, and magnetic dust filter at the top.
3. Persediaan dan Pemasangan
Follow these steps for assembling your PC components within the BitFenix Nova Mesh mATX ARGB case.
3.1 Menyediakan Kes
- Keluarkan Panel Sisi: Carefully remove the 4mm screw-free tempered glass side panel and the solid steel side panel.
- Kotak Aksesori: Locate the accessory box inside the case, which contains screws and other mounting hardware.
3.2 Pemasangan Motherboard
- Pasang Kebuntuan: Ensure the correct standoffs are installed for your Micro ATX or Mini ITX motherboard.
- Pasang Papan Induk: Place your motherboard onto the standoffs and secure it with the appropriate screws.
3.3 Pemasangan Unit Bekalan Kuasa (PSU)
Image: Diagram showing the modular HDD cage with 2.5" SSD mounts and 3.5" HDD trays, and the power supply unit (PSU) installation area with space up to 180mm.
- Kedudukan PSU: Slide the PSU into the bottom mount area, ensuring the fan faces downwards for optimal cooling (if applicable).
- PSU selamat: Fasten the PSU to the rear of the case with screws.
3.4 Pemasangan Pemacu Storan
- SSD 2.5": Mount 2.5" SSDs onto the dedicated mounts behind the motherboard tray or on the modular HDD cage.
- HDD 3.5": Install 3.5" HDDs into the removable trays within the modular HDD cage.
3.5 Pemasangan Kad Grafik (GPU)
Imej: Dalaman view of the case illustrating support for graphics cards up to 345mm, air coolers up to 160mm, and 25mm cable management space.
- Tanggalkan Penutup Slot PCIe: Tanggalkan penutup slot PCIe yang diperlukan dari belakang kes itu.
- Masukkan GPU: Masukkan kad grafik anda dengan berhati-hati ke dalam slot PCIe yang sesuai pada papan induk.
- GPU selamat: Fasten the GPU with screws to the case.
3.6 Cooling System Installation (Optional)
Image: Internal layout detailing radiator support (240mm at top, 120mm/240mm/280mm at front, 120mm at rear) and fan configurations.
- Air Cooler: Install your CPU air cooler, ensuring it does not exceed 160mm in height.
- Liquid Cooler (AIO): For 240mm AIO radiators, mount them at the top of the case. Ensure radiator thickness is within 27mm and fan thickness up to 25mm, with memory height up to 38mm.
- Additional Fans: Install additional 120mm or 140mm fans as needed in the front, top, or rear positions.
3.7 Pengurusan Kabel
Utilize the 25mm space behind the motherboard tray and the various cable routing cutouts to organize cables. This improves airflow and aesthetics.
4. Operating the ARGB Lighting System
The BitFenix Nova Mesh mATX ARGB case comes with three pre-installed ARGB fans and a controller for managing the lighting effects.
Image: Diagram illustrating the connection of ARGB fans to the controller, SATA power, motherboard ARGB 3-pin connector, and the front RGB switch.
4.1 ARGB Control Options
- Case Button Control: The pre-installed ARGB controller can be connected to the case's front RGB switch (often the reset button). Pressing this button will cycle through various ARGB lighting modes and colors.
- Penyegerakan Papan Induk: If your motherboard supports Addressable RGB (aRGB) with a 3-pin 5V header, you can connect the controller to your motherboard. This allows you to synchronize the case lighting with other ARGB components using your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync, BIOSTAR RGB Sync).
4.2 Kawalan Kelajuan Kipas (PWM)
The included controller also supports PWM (Pulse Width Modulation) for fan speed control. Connect the fan PWM cables to the controller, and the controller's PWM cable to a motherboard fan header. This allows your motherboard to dynamically adjust fan speeds based on system temperature.
5. Penyelenggaraan
Regular maintenance ensures optimal performance and longevity of your PC case and components.
5.1 Pembersihan Penapis Habuk
Imej: Meletup view of the front panel, dust filter, and high-density mesh, along with images of the PSU dust filter and magnetic top dust filter, emphasizing easy cleaning.
- Front Panel Filter: The front panel is removable for easy access to the dust filter. Gently pull the bottom of the front panel to detach it, then remove and clean the filter.
- Top Magnetic Filter: The magnetic dust filter on the top of the case can be easily lifted off for cleaning.
- Penapis Habuk PSU: The dust filter located at the bottom, beneath the PSU, slides out for cleaning.
- Kaedah Pembersihan: Use compressed air or a soft brush to remove accumulated dust from the filters. Wash with water if necessary, ensuring they are completely dry before reinstallation.
5.2 Pembersihan Am
- Luaran: Lap permukaan luar dengan lembut, damp kain. Elakkan pembersih yang kasar.
- Dalaman: Periodically use compressed air to clear dust from internal components and fan blades. Ensure the PC is powered off and unplugged before cleaning.
6. Penyelesaian masalah
Bahagian ini menangani isu biasa yang mungkin anda hadapi dengan sarung PC anda.
6.1 Kipas Tidak Berputar atau RGB Tidak Berfungsi
- Sambungan Kuasa: Ensure the ARGB controller is properly connected to a SATA power cable from your PSU.
- Sambungan Kipas: Verify that all fan PWM and ARGB cables are securely connected to the controller.
- Penyegerakan Papan Induk: If using motherboard sync, ensure the controller's ARGB cable is connected to the correct 3-pin 5V aRGB header on your motherboard (not a 4-pin 12V RGB header). Check your motherboard's software for ARGB control.
- Butang Kes: If using the case button for control, ensure it is correctly wired to the controller. Try pressing the button to cycle through modes.
6.2 Aliran Udara Lemah atau Suhu Tinggi
- Penapis Habuk: Bersihkan semua penapis habuk seperti yang diterangkan dalam bahagian Penyelenggaraan.
- Orientasi Peminat: Verify that fans are oriented correctly for optimal airflow (front fans typically intake, rear/top fans exhaust).
- Pengurusan Kabel: Memperbaik pengurusan kabel untuk mengurangkan halangan kepada aliran udara.
- Pelepasan Komponen: Ensure no components are blocking fan intakes or exhausts.
6.3 Side Panel Difficult to Close
- Penghalaan Kabel: Check for any cables that are bulging or obstructing the side panel. Reroute them through the cable management channels.
- Peletakan Komponen: Ensure all components are seated correctly and not extending beyond the case's internal dimensions.
7. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nama Model | BFC-NSE-300-KKGSR-4A |
| Faktor Bentuk | Mikro ATX, Mini ITX |
| Jenis Kes | Mid Tower |
| Dimensi (L x W x H) | 15.16 x 8.07 x 15.75 inci (385 x 205 x 400 mm) |
| bahan | Logam, Kaca Tempered |
| warna | Hitam |
| Peminat prapasang | Kipas ARGB 3 x 120mm |
| Sokongan Kipas (Depan) | 2 x 120mm atau 2 x 140mm |
| Sokongan Peminat (Atas) | 2 x 120mm |
| Sokongan Kipas (Belakang) | 1 x 120mm |
| Sokongan Radiator (Atas) | 240mm (thickness <= 27mm, fan thickness <= 25mm, memory height <= 38mm) |
| Sokongan Panjang GPU | Sehingga 345mm |
| Air Cooler Height Support | Sehingga 160mm |
| PSU Length Support | Sehingga 180mm |
| Ruang Pemacu (SSD 2.5") | 3+1 |
| Ruang Pemacu (HDD 3.5") | 2 |
| Ruang Pengurusan Kabel | 25mm behind motherboard tray |
| Penapis Habuk | Front Panel, PSU (Bottom), Magnetic (Top) |
| Pelabuhan I/O | 2 x USB 3.0 |
8. Maklumat Waranti
BitFenix products are manufactured to the highest quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and retailer. Please retain your proof of purchase for warranty claims.
For detailed warranty information, please refer to the official BitFenix webtapak atau hubungi peruncit tempatan anda.
9. Sokongan
If you encounter any issues or have questions regarding your BitFenix Nova Mesh mATX ARGB PC Case that are not covered in this manual, please contact BitFenix customer support or visit their official webtapak untuk bantuan lanjut.
BitFenix Official Webtapak: www.bitfenix.com
Please have your product model number (BFC-NSE-300-KKGSR-4A) and proof of purchase ready when contacting support.
