1. Pengenalan
The Vgate vLinker FS USB is a high-performance OBD2 to USB car diagnostic tool designed to interface with your vehicle's On-Board Diagnostics system. It allows users to read and clear diagnostic trouble codes, view live data, and perform various vehicle-specific functions, particularly optimized for use with FORScan software. This manual provides comprehensive instructions for setting up, operating, and maintaining your vLinker FS USB device.
Rajah 1: Alat Diagnostik Vgate vLinker FS USB OBD2
2. Ciri-ciri Utama
- Determines cause of Check Engine Light and clears DTCs.
- Reads live data and hard memory data.
- Collects vehicle information.
- Custom-designed for use with FORScan and recommended by the FORScan Team.
- MS-CAN & HS-CAN toggle switch for convenient access and configuration.
- Supports USB 2.0 and USB 3.0 interfaces.
- Transfer rate and baud rate up to 3Mpbs and 3Mhz, significantly faster than other devices.
- Compatible with a variety of third-party apps and software.
3. Kandungan Pakej
Selepas membuka pakej, sahkan bahawa semua komponen ada dan dalam keadaan baik:
- Vgate vLinker FS USB OBD2 Adapter
- Manual Pengguna / Panduan Mula Pantas
Video 1: Membuka kotak dan seterusnyaview of the Vgate vLinker FS USB adapter and its included quick start guide.
4. Panduan Persediaan
4.1 Pemasangan Pemandu
Before connecting the vLinker FS USB to your computer, it is crucial to install the necessary drivers. Drivers can typically be found on the official Vgate website or the FORScan website, as recommended. Follow the on-screen instructions during installation.
- Download the latest drivers for your operating system (Windows XP/Vista/7/8/8.1/10 are supported).
- Run the installer and follow the prompts.
- Mulakan semula komputer anda jika digesa.
4.2 Menyambung ke Komputer Anda
Once drivers are installed, connect the vLinker FS USB to your computer using the integrated USB cable. The device should be recognized by your system.
4.3 Connecting to Your Vehicle
Locate your vehicle's OBD2 port, typically found under the dashboard on the driver's side. Plug the vLinker FS USB adapter firmly into the OBD2 port. Ensure a secure connection.
4.4 Software Installation (FORScan Example)
For optimal performance, especially with Ford, Mazda, Lincoln, and Mercury vehicles, it is recommended to use FORScan software. Download and install FORScan from their official webtapak.
- Download the FORScan application for Windows.
- Pasang aplikasi pada komputer anda.
- Launch FORScan. The software should detect the vLinker FS USB adapter.
- Turn your vehicle's ignition to the "ON" position (engine off).
- Follow the software prompts to connect to your vehicle and begin diagnostics.
Figure 2: Vgate vLinker FS USB connected for dealership-level diagnostics.
5. Arahan Operasi
5.1 Fungsi Diagnostik Asas
With the vLinker FS USB connected to your vehicle and computer, and your diagnostic software launched, you can perform various functions:
- Baca/Kosongkan DTC: Access the "Diagnostic Trouble Codes" section of your software to read current, pending, and historic codes. Use the "Clear Codes" function to turn off the Check Engine Light after repairs.
- Strim Data Langsung: Monitor real-time sensor data such as engine RPM, vehicle speed, oxygen sensor readings, fuel system status, etc. This is crucial for diagnosing intermittent issues.
- Pegunkan Data Bingkai: View a snapshot of sensor readings at the moment a Diagnostic Trouble Code (DTC) was set, providing context for the fault.
- Maklumat Kenderaan: Retrieve vehicle identification number (VIN), calibration IDs, and calibration verification numbers.
5.2 MS-CAN & HS-CAN Toggle Switch
The vLinker FS USB features a toggle switch to select between MS-CAN (Medium Speed CAN) and HS-CAN (High Speed CAN) networks. This allows access to different modules within your vehicle, enabling comprehensive diagnostics and configuration of as-built data. Ensure the switch is in the correct position for the module you intend to access.
Figure 3: Device highlighting MS-CAN and HS-CAN access modes.
5.3 Supported Software
Beyond FORScan, the vLinker FS USB is compatible with various third-party diagnostic applications. Always ensure the software you choose is compatible with the vLinker FS USB and your vehicle's make/model.
Gambar 4: Cthamples of supported diagnostic software.
6. Penyelenggaraan
- Pastikan peranti bersih dan bebas daripada habuk dan lembapan.
- Simpan di tempat yang sejuk dan kering apabila tidak digunakan.
- Avoid excessive force when connecting or disconnecting the adapter.
- Periksa dengan kerap pengeluar website for firmware updates for the vLinker FS USB and software updates for your diagnostic application to ensure optimal performance and compatibility.
7. Penyelesaian masalah
Jika anda menghadapi masalah, rujuk kepada masalah dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Device not found / Not recognized by computer. | Missing or incorrect USB drivers; faulty USB port/cable. | Ensure USB drivers are correctly installed from the official website. Try a different USB port on your computer. Check the USB cable for damage. |
| Tidak dapat disambungkan ke ECU kenderaan. | Ignition not in "ON" position; loose OBD2 connection; incorrect software settings; vehicle not supported. | Turn ignition to "ON" (engine off). Ensure the adapter is firmly plugged into the OBD2 port. Verify software settings (e.g., COM port, baud rate). Confirm vehicle compatibility. |
| Slow data transfer or freezing. | Outdated drivers; software conflicts; high system load. | Update drivers to the latest version. Close unnecessary applications on your computer. Ensure your computer meets the software's minimum requirements. |
| "OBD plug hard to insert into port!" (from review) | Manufacturing tolerance; tight fit in specific vehicle ports. | Apply gentle, firm pressure. Ensure correct orientation. If consistently difficult, inspect the OBD port for obstructions. |
8. Spesifikasi
| Jenama | Vgate |
| Model | vLinker FS USB |
| Ketersambungan | USB 2.0, USB 3.0 |
| Protokol yang Disokong | SAE J1850-PWM, SAE J1850-VPW, ISO 9141-2, ISO 14230-4 (slow), ISO 14230-4 (fast), ISO 15765-4 (CAN), ISO 1939 (CAN), ISO 11898 (raw CAN), Medium Speed CAN (MS-CAN) |
| Kadar Penghantaran | Sehingga 3Mpbs |
| Kadar Baud | Sehingga 3Mhz |
| Sistem Operasi yang Disokong | Windows XP, Windows 2000/Vista/7/8/8.1/10 |
| Dimensi | 5.91 x 4.92 x 1.57 inci |
| Berat badan | 5.3 auns |
Figure 5: Supported communication protocols for vLinker FS USB.
9. Waranti dan Sokongan
Vgate products are designed for reliability and performance. For warranty information, technical support, or further assistance, please refer to the contact details provided on the product packaging or visit the official Vgate webtapak. Simpan resit pembelian anda untuk tuntutan waranti.
