Manual Arahan Sarung Menara Pertengahan COUGAR MX360 RGB

1. Pengenalan

Thank you for choosing the COUGAR MX360 RGB Mid Tower Case. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case. The MX360 RGB combines a sleek design with ARGB LED strips on the front panel, offering excellent cooling performance and support for a wide range of components, including up to a 360mm radiator, 315mm graphics cards, and 170mm CPU coolers. Its compact layout and full-length PSU shroud contribute to a clean and organized build.

2. Maklumat Keselamatan

• Sentiasa putuskan sambungan bekalan kuasa daripada soket dinding sebelum memasang atau menanggalkan sebarang komponen.
• Handle components with care to avoid damage from static electricity. Consider using an anti-static wrist strap.
• Jauhkan bahagian kecil dan skru daripada kanak-kanak.
• Pastikan pengudaraan yang betul di sekitar bekas untuk mengelakkan terlalu panas.
• Do not attempt to modify the case or its components, as this may void your warranty and pose safety risks.

3. Kandungan Pakej

Sila sahkan bahawa semua item berikut disertakan dalam pakej anda:

• Sarung COUGAR MX360 RGB Mid Tower
• Kotak Aksesori (mengandungi skru, pengikat, pengikat kabel, dll.)
• Manual Pengguna (dokumen ini)

4. Produk Lebihview

The COUGAR MX360 RGB case features a minimalist design with integrated ARGB lighting and a tempered glass side panel for showcasing your build.

Rajah 4.1: Bahagian hadapan view of the COUGAR MX360 RGB case, showing the interior and active RGB lighting.

Rajah 4.2: Depan view of the COUGAR MX360 RGB case, highlighting the integrated ARGB LED strips.

Rajah 4.3: Sisi view of the COUGAR MX360 RGB case, featuring the tempered glass panel.

Rajah 4.4: Depan bersudut view of the COUGAR MX360 RGB case, showcasing its design and ARGB elements.

5. Persediaan dan Pemasangan

Follow these steps to install your components into the COUGAR MX360 RGB case.

5.1 Menyediakan Kes

1. Letakkan bekas di atas permukaan yang rata dan stabil.
2. Remove the tempered glass side panel by unscrewing the thumb screws at the rear of the case and carefully sliding the panel off.
3. Remove the opposite metal side panel by unscrewing the thumb screws and sliding it off.

5.2 Pemasangan Motherboard

1. Install the I/O shield (if not pre-installed on your motherboard) into the rear opening of the case.
2. Ensure the correct standoffs are installed for your motherboard form factor (ATX, Micro-ATX, Mini-ITX). Adjust or add standoffs as needed.
3. Letakkan papan induk anda dengan berhati-hati pada penyangga, selaraskan lubang skru.
4. Selamatkan papan induk dengan skru yang disediakan.

5.3 Pemasangan Unit Bekalan Kuasa (PSU)

1. Locate the PSU shroud at the bottom of the case.
2. Slide your PSU into the designated compartment from the rear of the case.
3. Selamatkan PSU dengan skru dari belakang kes itu.
4. Route necessary cables through the cutouts in the PSU shroud for cable management.

5.4 Pemasangan Pemacu Storan

The MX360 RGB supports various storage configurations.

• HDD 3.5": Install into the drive cage located under the PSU shroud.
• 2.5" SSDs/HDDs: Mount onto the dedicated trays or mounting points behind the motherboard tray.

5.5 Pemasangan Kad Grafik (GPU)

1. Tanggalkan penutup slot PCIe yang diperlukan dari belakang kes itu.
2. Insert your graphics card into the appropriate PCIe slot on the motherboard.
3. Secure the graphics card with screws. The case supports graphics cards up to 315mm in length.

5.6 Cooling System Installation (Fans/Radiators)

The case supports up to six fans and a 360mm water cooling radiator.

• Depan: Supports up to 3 x 120mm or 2 x 140mm fans, or a 240/280/360mm radiator.
• Atas: Supports up to 2 x 120mm or 2 x 140mm fans, or a 240/280mm radiator.
• belakang: Menyokong 1 kipas x 120mm.

Install fans or radiators using the provided screws, ensuring proper airflow direction.

5.7 Sambungan Panel Hadapan

Connect the front panel cables (USB, Audio, Power, Reset, LED) to their corresponding headers on your motherboard. Refer to your motherboard manual for exact header locations.

5.8 ARGB Lighting Connection

The integrated ARGB LED strips on the front panel connect via a 5V/3Pin ARGB connector. Connect this cable to a compatible 5V/3Pin ARGB header on your motherboard to synchronize lighting effects with your system.

6. Mengendalikan Kes

Once all components are installed and connected, replace the side panels. Power on your system using the power button on the top I/O panel. The ARGB lighting will illuminate, controlled by your motherboard's software or a dedicated ARGB controller if you have one installed.

7. Penyelenggaraan

Penyelenggaraan tetap membantu memastikan prestasi optimum dan jangka hayat komponen PC anda.

• Penapis Habuk: The MX360 RGB includes removable dust filters (e.g., top, bottom). Periodically remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation).
• Pembersihan Dalaman: Use compressed air to remove dust from internal components like fans, heatsinks, and the motherboard.
• Pembersihan Luaran: Lap permukaan luar dengan lembut, damp kain. Elakkan pembersih yang kasar.

8. Penyelesaian masalah

Jika anda menghadapi masalah, rujuk langkah penyelesaian masalah biasa berikut:

• Tiada Kuasa: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check the PSU switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• Pencahayaan ARGB Tidak Berfungsi: Confirm the 5V/3Pin ARGB connector is correctly plugged into a compatible motherboard header. Check your motherboard's RGB software for control settings.
• Terlalu panas: Ensure all case fans are spinning and oriented correctly for optimal airflow. Check for dust buildup on filters and components. Verify CPU cooler and GPU cooler are properly installed.
• Sambungan longgar: Re-seat all components (RAM, GPU, storage drives) and check all power and data cables.

9. Spesifikasi

10. Waranti dan Sokongan

COUGAR products are designed and manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official COUGAR webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.

For technical support or further assistance, please visit the official COUGAR website or contact their customer service department. You can find more information and resources on the COUGAR Store on Amazon.