DD Audio 1112-D4 12" Dual 4-Ohm Subwoofer Instruction Manual

pengenalan

This manual provides essential information for the proper installation, operation, and maintenance of your DD Audio 1112-D4 12-inch Dual 4-Ohm Subwoofer. Please read it thoroughly before use to ensure optimal performance and longevity of your product. Adhering to these guidelines will help you achieve the best possible audio experience.

Produk Selesaiview

The DD Audio 1112-D4 is a 12-inch subwoofer engineered for high-fidelity audio reproduction in car audio systems. It features a dual 4-ohm voice coil configuration, providing flexible wiring options to match various amplifier setups. As part of the 1100 Series, this subwoofer is designed for efficiency and sound quality, making it suitable for both sealed and small vented enclosures. Its Hi-Def Tuned suspension system contributes to its performance characteristics.

Imej 1: Depan view of the DD Audio 1112-D4 subwoofer, showcasing the black cone with the red DD Audio logo at its center.

Spesifikasi Teknikal

Nota: All specifications are subject to change without notice. Performance may vary based on installation and environmental factors.

Persediaan dan Pemasangan

Proper installation is crucial for the performance and longevity of your subwoofer. If you are unsure about any steps, it is recommended to seek professional installation.

1. Langkah-langkah Keselamatan

• Disconnect the vehicle's battery before starting any electrical work to prevent electrical shorts or damage.
• Pakai peralatan keselamatan yang sesuai, termasuk pelindung mata, semasa pemasangan.
• Ensure all wiring is correctly gauged for the power levels and properly fused to protect the system.

2. Enclosure Selection and Construction

The DD Audio 1112-D4 is designed to perform optimally in specific enclosure volumes:

• Sealed Enclosure Volume: 0.8 - 1.5 cubic feet
• Ported Enclosure Volume: 0.8 - 1.75 cubic feet

Ensure the enclosure is robust, airtight (for sealed designs), and properly braced to prevent rattles and vibrations that can degrade sound quality.

Imej 2: Sisi view of the DD Audio 1112-D4 subwoofer, highlighting the cone and flexible surround components.

3. Wiring the Dual 4-Ohm Voice Coils

The 1112-D4 features dual 4-ohm voice coils, offering flexibility in wiring configurations to match your amplifier's impedance requirements. Always verify your amplifier's stable impedance range before wiring.

• Pendawaian Selari (2 Ohm): Connect the positive terminals of both voice coils together, and the negative terminals of both voice coils together. Then connect these combined positive and negative terminals to your amplifier. This configuration presents a 2-ohm load to the amplebih hidup.
• Pendawaian Siri (8 Ohm): Connect the positive terminal of one voice coil to the negative terminal of the other voice coil. Then connect the remaining positive and negative terminals to your amplifier. This configuration presents an 8-ohm load to the amplebih hidup.

Warning: Incorrect impedance matching can damage your amplifier or subwoofer. Consult your amplifier's manual for compatible load impedances.

Imej 3: Bersudut view of the DD Audio 1112-D4 subwoofer, illustrating the dual voice coil terminals for wiring connections.

4. Memasang Subwufer

• Ensure the mounting surface within the enclosure is flat and secure.
• Use appropriate screws and ensure a tight, airtight seal between the subwoofer frame and the enclosure to prevent air leaks.
• The mounting diameter required is 10.937 inches, and the mounting depth is 5.8 inches. Verify these dimensions against your enclosure design.

Garis Panduan Operasi

1. Pengendalian Kuasa

The DD Audio 1112-D4 has a recommended RMS power range of 200-400 watts and a peak power handling of 800 watts. It is crucial to match your amplifier's output to these specifications. Underpowering can be as damaging as overpowering, as it can lead to amplifier clipping and excessive distortion, which can damage the subwoofer.

2. AmpTetapan penguat

• Tetapan Keuntungan: Tetapkan ampkeuntungan liifier dengan betul untuk memadankan vol keluarantage of your head unit. The gain control is not a volume knob; it should be set to prevent clipping and distortion at maximum desired listening levels.
• Penapis Laluan Rendah (LPF): Tetapkan LPF pada anda amplifier or head unit to filter out frequencies above the subwoofer's intended range, typically between 60Hz and 100Hz. This ensures the subwoofer only reproduces bass frequencies.
• Subsonic Filter (HPF): Jika anda amplifier has a subsonic filter, set it to protect the subwoofer from playing frequencies below its resonant frequency (Fs: 35Hz), usually around 25-30Hz. This prevents wasted power and potential damage from extreme low-frequency excursions.

3. Tempoh Pecah Masuk

Allow a break-in period of approximately 10-20 hours of moderate listening before operating the subwoofer at high volumes. This allows the suspension components (surround and spider) to loosen up and reach their optimal performance characteristics, improving sound quality and longevity.

Penyelenggaraan

• Pembersihan: Use a soft, dry cloth to gently clean the subwoofer cone and surround. Avoid using harsh chemicals, solvents, or excessive moisture, which can damage the materials.
• Pemeriksaan: Periodically inspect all wiring connections for tightness and signs of corrosion. Check the subwoofer surround and cone for any signs of physical damage, tears, or deterioration.
• Faktor Persekitaran: Protect the subwoofer from extreme temperatures, direct sunlight, and moisture. These conditions can degrade materials and affect performance over time.

Image 4: Rear angled view of the DD Audio 1112-D4 subwoofer, displaying the robust motor structure and ventilation for heat dissipation.

Menyelesaikan masalah

If you experience issues with your subwoofer, consult the following common problems and solutions:

• Tiada Bunyi:
  • Check all wiring connections (power, ground, remote, RCA, speaker wires) for proper connection and continuity.
  • Sahkan amplifier is powered on (check its power indicator light).
  • Check fuses on the amplifier and the main power wire.
  • Ensure the head unit is sending an audio signal to the amplebih hidup.
• Bunyi Herot:
  • Kurangkan amppenguat kuasa untuk mengelakkan keratan.
  • Check for proper LPF and subsonic filter settings.
  • Ensure the subwoofer is not over-excursion (playing too loud for its capabilities).
  • Inspect the subwoofer cone and surround for physical damage.
• Bass lemah:
  • Sahkan amplifier gain and LPF settings are optimized.
  • Check for correct wiring impedance matching between the subwoofer and amplebih hidup.
  • Ensure the enclosure is sealed properly (if applicable) and free of air leaks.
  • Confirm the phase setting on the amplifier or head unit is correct.
• Subwoofer Overheating:
  • Pastikan pengudaraan yang betul di sekeliling amplebih hidup.
  • Check for correct impedance matching; an impedance too low can cause overheating.
  • Elakkan operasi berpanjangan pada kelantangan maksimum, terutamanya semasa tempoh rehat.

If these steps do not resolve the issue, contact DD Audio customer support or a qualified car audio technician for further assistance.

Waranti dan Sokongan

Maklumat Waranti

This DD Audio 1112-D4 subwoofer comes with a Waranti Terhad. The specific terms, conditions, and duration of the warranty are provided by DD Audio. Please refer to the official DD Audio website or your purchase documentation for complete warranty details. It is essential to retain your proof of purchase for any warranty claims.

Sokongan Pelanggan

For technical assistance, warranty inquiries, or further product information, please visit the official DD Audio website. Contact details for their customer support department are typically available on the manufacturer's webtapak.