Planet GPL-8000 8-Port GPON Optical Line Terminal User Manual

1. Pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Planet GPL-8000 8-Port GPON Optical Line Terminal (OLT). The GPL-8000 is designed to facilitate high-speed fiber optic broadband network deployments, offering eight GPON ports, four Gigabit TP/SFP combo ports, four Gigabit SFP ports, four 10G SFP+ ports, and a dedicated management port. It complies with ITU-T G.984/G.988 standards, ensuring compatibility and reliable performance for connecting up to 1024 ONU and HGU devices.

2. Maklumat Keselamatan

Observe the following safety precautions to prevent damage to the device and ensure user safety:

• Pastikan pembumian peranti yang betul.
• Jangan dedahkan peranti kepada air atau kelembapan berlebihan.
• Kendalikan peranti dalam julat suhu dan kelembapan yang ditentukan.
• Putuskan kuasa sebelum membersihkan atau melakukan servis.
• Avoid looking directly into optical ports when active, as laser radiation can cause eye damage.
• Only use the power adapter provided or specified by the manufacturer.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• 1 x Planet 8-Port GPON Port Optical Line Terminal (GPL-8000)
• Kord Kuasa (mungkin berbeza mengikut rantau)
• Rack-mounting Kit
• Panduan Pemasangan Pantas

4. Produk Lebihview

The Planet GPL-8000 is a robust Optical Line Terminal designed for high-density GPON deployments. Below is an illustration of the device's front panel, highlighting its various ports and indicators.

Rajah 1: Front Panel of the Planet GPL-8000 OLT. This image displays the front of the GPL-8000 unit, featuring a series of ports and LED indicators. From left to right, it includes power and system status LEDs, a console port, management (MGMT) ports, Gigabit TP/SFP combo ports (G1-G8), 10G SFP+ ports (TG1-TG4), and GPON ports (P1-P8). The Planet logo and model number GPL-8000 are visible on the right side.

4.1 Komponen Panel Hadapan

• Penunjuk LED:
  • PWR1/PWR2: Power status indicators.
  • SYS: Penunjuk status sistem.
  • ALM: Penunjuk penggera.
  • LNK/ACT (1G/10G): Link/Activity indicators for Gigabit and 10G ports.
  • PON (P1-P8): GPON port status indicators.
• Pelabuhan Konsol: For local management access (RJ45).
• Pelabuhan MGMT: Dedicated Ethernet port for out-of-band management.
• Gigabit TP/SFP Combo Ports (G1-G8): Four pairs of ports, each offering a Gigabit Ethernet (RJ45) and a Gigabit SFP slot. Only one interface in each combo pair can be active at a time.
• 10G SFP+ Ports (TG1-TG4): Four 10-Gigabit SFP+ slots for high-speed uplinks.
• GPON Ports (P1-P8): Eight GPON (Gigabit Passive Optical Network) ports for connecting to ONUs/HGUs.

5. Persediaan dan Pemasangan

5.1 Pemasangan Fizikal

1. Pemasangan Rak: Secure the GPL-8000 into a standard 19-inch equipment rack using the provided rack-mounting kit. Ensure adequate ventilation around the unit.
2. Sambungan Kuasa: Connect the power cord to the device's power input and then to a grounded AC power outlet. Verify that the PWR LED illuminates.
3. Pembumian: Connect a grounding wire from the device's grounding screw to a proper earth ground.

5.2 Sambungan Rangkaian Awal

1. Pelabuhan Pengurusan: Connect an Ethernet cable from your management workstation to the dedicated MGMT port on the GPL-8000.
2. Port Konsol (Pilihan): For direct command-line interface (CLI) access, connect a console cable from your workstation to the Console port. Configure your terminal emulator with settings: 9600 baud rate, 8 data bits, no parity, 1 stop bit (9600, N, 8, 1).
3. Sambungan Uplink: Connect your network's uplink cables to the 10G SFP+ ports (TG1-TG4) or the Gigabit TP/SFP Combo ports (G1-G8) as required.
4. GPON Connections: Insert appropriate GPON optical modules into the GPON ports (P1-P8) and connect the fiber optic cables to your GPON network.

6. Arahan Operasi

6.1 Mengakses Peranti

The GPL-8000 can be managed via a web-based GUI, CLI (Console/Telnet/SSH), or SNMP.

• Web GUI: Buka a web browser and enter the device's IP address (default IP address can be found in the Quick Installation Guide or by using the console).
• CLI: Use a terminal emulator connected to the console port or establish a Telnet/SSH session to the device's IP address.

6.2 Konfigurasi Asas

Refer to the detailed software user manual for advanced configuration. Key initial steps typically include:

• Changing the default administrator password.
• Configuring the management IP address.
• Setting up GPON service profiles and registering ONUs/HGUs.
• Configuring VLANs and QoS settings.

7. Penyelenggaraan

• Pembersihan: Periodically clean the device's exterior with a soft, dry cloth. Ensure ventilation openings are free from dust and obstructions. Do not use liquid or aerosol cleaners.
• Kemas kini Firmware: Regularly check the Planet website for firmware updates to ensure optimal performance and security. Follow the provided instructions for firmware upgrade procedures.
• Pemantauan Alam Sekitar: Ensure the operating environment remains within specified temperature and humidity limits to prevent hardware degradation.

8. Penyelesaian masalah

This section addresses common issues you might encounter with the GPL-8000.

• Tiada Kuasa:
  • Verify the power cord is securely connected to both the device and the power outlet.
  • Periksa salur keluar kuasa untuk kefungsian.
  • Ensure the PWR LED is illuminated.
• Tiada Pautan pada Port:
  • Check the cable connection for both ends.
  • Ensure the correct cable type is used (e.g., fiber for SFP/GPON, Ethernet for TP).
  • Sahkan peranti yang disambungkan dihidupkan dan berfungsi dengan betul.
  • For SFP/SFP+ ports, ensure the correct transceiver module is inserted.
  • For GPON ports, check fiber integrity and ONU registration status.
• Tidak Boleh Akses Web GUI/CLI:
  • Verify your management workstation's IP address is in the same subnet as the GPL-8000's management IP.
  • Check physical connection to the MGMT or Console port.
  • Ensure no firewall is blocking access.
  • Reset the device to factory defaults (refer to the full user manual for procedure) if the IP address is unknown or forgotten.

9. Spesifikasi

10. Waranti dan Sokongan Teknikal

For detailed warranty information, please refer to the warranty card included with your product or visit the official Planet Technology Corporation website. For technical assistance, product documentation, or to report issues, please contact Planet's customer support through their official channels. Keep your product model number (GPL-8000) and serial number ready when seeking support.

Pengeluar: PLANET Technology Corporation.