MTB Hopper Lil Air-2 Portable Bike Ramp Manual Arahan

1. Produk Lebihview

The MTB Hopper Lil Air-2 is a portable and versatile bike ramp designed for various cycling disciplines, including BMX, MTB, Dirt, and Street riding. It caters to riders of all skill levels, from beginners learning to jump to experienced riders performing advanced tricks. Its design emphasizes portability, quick assembly, and durability.

Figure 1: The MTB Hopper Lil Air-2 ramp in its assembled state.

2. Arahan Perhimpunan

The Lil Air-2 ramp is designed for quick and straightforward assembly, typically taking approximately 5 minutes. Follow these steps to set up your ramp:

1. Unfold the Ramp: Carefully unfold the main sections of the ramp from its compact, backpack configuration.
2. Sambungkan Bahagian: Align and connect the numbered sections of the ramp. Ensure all interlocking parts are securely fitted.
3. Selamatkan Struktur: Fasten any ropes or straps to the designated hooks to stabilize the rampstruktur.
4. Letakkan Ramp: Place the assembled ramp on a stable, level surface suitable for riding.

Figure 2: Detail of the numbered interlocking sections for secure assembly.

3. Arahan Operasi

The Lil Air-2 ramp is designed for a smooth roll and provides an introduction to airy jumps, dirt street jumps, and slopestyle. It is suitable for various skill levels.

• Rider Skill Levels: Suitable for beginners learning to jump, as well as intermediate and experienced riders.
• Keserasian Basikal: ramp is compatible with Hard Tail and BMX bikes.
• Jump Characteristics: ramp features a smooth bended surface for quiet and great roll.
• Performance Metrics: Capable of supporting jumps with a maximum speed of 28 km/h, achieving a jump height of approximately 1.8 meters and a distance of 5 meters.

Figure 3: Diagram showing typical jump height and distance achievable with the Lil Air-2 ramp.

4. Garis Panduan Keselamatan

Always prioritize safety when using the MTB Hopper Lil Air-2 ramp. Adhering to these guidelines will help prevent injuries:

• Alat Pelindung: Always wear appropriate safety gear, including a helmet, knee pads, elbow pads, and gloves.
• Periksa Sebelum Penggunaan: Before each use, thoroughly inspect the ramp for any damage, loose connections, or wear. Ensure all parts are securely fastened.
• Permukaan Stabil: Letakkan ramp on a firm, level, and non-slip surface. Avoid uneven terrain or soft ground that could cause the ramp untuk beralih.
• Clear Landing Zone: Ensure the landing area is clear of obstacles, debris, and other people. The landing zone should be smooth and provide adequate space for a safe landing.
• Had Berat: Do not exceed the maximum load capacity of 130 kg (286.6 lbs). This includes the rider and their equipment.
• Penyeliaan: Penunggang yang lebih muda harus sentiasa diawasi oleh orang dewasa.
• Tahap kemahiran: Start with smaller jumps and gradually increase difficulty as your skills improve. Do not attempt tricks beyond your current ability.
• Keadaan Cuaca: Avoid using the ramp in wet, icy, or windy conditions, which can affect stability and traction.

5. Penjagaan dan Penyelenggaraan

Proper care and maintenance will extend the lifespan of your MTB Hopper Lil Air-2 ramp:

• Pembersihan: Bersihkan ramp dengan iklanamp cloth to remove dirt and debris. Avoid harsh chemicals that could damage the plywood material.
• Storan: Simpan ramp in a dry, sheltered location when not in use to protect it from weather elements. Its foldable design allows for compact storage.
• Periksa Pengikat: Regularly check all bolts, screws, and connection points to ensure they are tight and secure. Tighten as necessary.
• Plywood Care: As the ramp is made of plywood, avoid prolonged exposure to moisture to prevent warping or degradation.

6. Spesifikasi Produk

7. Sokongan dan Jaminan

For further assistance, product information, or warranty details, please visit the official MTB Hopper store or contact their customer support.

Kedai Jenama Rasmi: MTB Hopper Store on Amazon