Claiks P1.01.002

Claiks Standing Desk with Drawers, Adjustable Height, 48 Inch, Black (Model P1.01.002) Instruction Manual

Panduan anda untuk pemasangan, pengendalian dan penyelenggaraan.

pengenalan

This manual provides detailed instructions for the assembly, operation, and maintenance of your Claiks Standing Desk with Drawers, Model P1.01.002. This electric adjustable height desk features a 2-tier shelf stand, two integrated drawers for storage, and a smooth height adjustment mechanism. Please read this manual thoroughly before beginning assembly or operation to ensure safe and correct usage.

Maklumat Keselamatan

Ensure the desk is properly assembled and the load does not exceed the recommended 176 pounds to maintain stability and prevent damage or injury. Always keep hands and objects clear of moving parts during height adjustment. Do not allow children to operate the desk unsupervised. Avoid placing liquids directly on the control panel or near electrical components. Regularly check all screws and connections to ensure they remain tight.

Kandungan Pakej

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact Claiks customer support.

Claiks Standing Desk Parts List

Image: All components of the Claiks Standing Desk laid out, including desktop panels, frame components, drawers, and hardware. A note indicates that the table consists of two pieces and a Phillips screwdriver is not included.

  • Desktop panels (2 pieces)
  • Desk frame components (legs, crossbars)
  • Motor and control panel
  • 2-Tier shelf stand components
  • Fabric drawers (2 pieces)
  • Hardware (screws, bolts, tools)
  • Penyesuai kuasa dan kabel
  • Klip pengurusan kabel
  • Manual arahan

Persediaan dan Perhimpunan

Assembly of the Claiks Standing Desk is designed to be straightforward. It is recommended to have two people for assembly due to the weight of some components. A detailed video guide is available to assist you.

Video: Official Claiks installation manual for the standing desk with drawers. This video provides step-by-step visual guidance for assembling the desk components.

  1. Sediakan Ruang Kerja: Clear a spacious area for assembly. Lay out all parts and hardware, organizing them by their labels.
  2. Pasang Bingkai Meja: Follow the detailed instructions in the provided manual to connect the leg components and crossbars. Ensure all screws are tightened securely.
  3. Lampirkan Desktop: Carefully place the desktop panels onto the assembled frame and secure them using the designated hardware.
  4. Install the 2-Tier Shelf Stand: Assemble the monitor stand components and attach them to the desktop.
  5. Insert the Drawers: Place the fabric drawers into their designated compartments on the shelf stand.
  6. Sambungkan Komponen Elektrik: Attach the control panel, motor, and power adapter according to the wiring diagram in the manual. Use cable management clips to keep wires tidy.
Easy Installation with Screwdriver

Image: A hand using a screwdriver to fasten a screw into a desktop panel, illustrating the ease of installation.

Arahan Operasi

Your Claiks Standing Desk features an intuitive control panel for easy height adjustment and preset memory functions.

Multi-Function Intelligent Keypad

Image: A close-up of the multi-function intelligent keypad with up/down arrows and three memory preset buttons (1, 2, 3).

  • Menyelaraskan Tinggi: Gunakan Naik (^) dan Bawah (v) arrow buttons on the control panel to manually adjust the desk height. The current height is displayed on the digital screen.
  • Menyimpan Pratetap: To save a preferred height setting, adjust the desk to the desired height, then press the S button followed by one of the memory buttons (1, 2, atau 3). The height will be saved to that button.
  • Menggunakan Pratetap: Hanya tekan butang memori yang sepadan (1, 2, atau 3) to automatically move the desk to your saved height.
  • Laci: The two fabric drawers provide convenient storage for office supplies.
  • 2-Tier Shelf Stand: The mid-desk top features two adjustable heights, allowing for ergonomic monitor placement.

Ciri Lebihview

The Claiks Standing Desk is designed for comfort, organization, and durability.

  • 2-Tier Shelf Stand: Unique felt fence design with 2 adjustable heights for ergonomic monitor viewing.
  • 2-Drawers for Storage: Ample storage and organization space for home office tasks.
  • Pelarasan Ketinggian Lancar: Electric motor allows height adjustment from 28.35" to 46.46" with 3 savable preset settings.
  • Motor berkuasa: Custom motor provides strong power while keeping noise levels under 50 dB.
Ultra Quiet Design with Noise Level Comparison

Image: A visual representation comparing the desk's operating noise level (45dB) to other common sounds like falling leaves (10dB), normal voice (60dB), and engine sound (90dB), highlighting its ultra-quiet operation.

Smooth Moves - House of Cards on Desk

Image: A house of cards standing on the desk surface, illustrating the smooth and stable movement during height adjustment.

Penyelenggaraan

To ensure the longevity and optimal performance of your Claiks Standing Desk, follow these maintenance guidelines:

  • Pembersihan: Lap desktop dan bingkai dengan lembut, damp kain. Elakkan bahan kimia yang keras atau pembersih yang kasar.
  • Pengurusan Kabel: Periodically check and reorganize cables to prevent tangling or damage.
  • Keketatan skru: Over time, screws may loosen. Regularly inspect all fasteners and tighten them as needed.
  • Penjagaan Motor: Keep the motor area free from dust and debris. Do not attempt to lubricate the motor or internal mechanisms.

Menyelesaikan masalah

If you encounter any issues with your desk, refer to the following common troubleshooting steps or consult the provided video guides.

  • Desk Not Adjusting: Check all power connections. Ensure the power adapter is securely plugged into both the desk and a working wall outlet.
  • Kod Ralat: If the control panel displays an error code (e.g., "rES"), refer to the specific troubleshooting video for resolution.

Video: Step-by-Step guide from Claiks on resolving the "rES" mode error on desk control panels. This video is applicable to various standing desk models with similar control systems.

  • Kaki Tidak Sekata: If the desk legs appear uneven during adjustment, a reset or synchronization procedure may be required.

Video: Claiks guide on how to fix asynchronous elevation of the non-motor side leg on a standing desk. This video provides instructions for correcting uneven leg movement.

Spesifikasi

CiriPerincian
JenamaClaiks
Nombor ModelP1.01.002
Dimensi Produk24"D x 48"W x 28"H
warnaHitam
Gayamoden
Bahan AsasLogam (Keluli Tahan Karat)
Jenis Bahan AtasKayu Kejuruteraan
Jenis SelesaiLakuer
Ciri KhasBoleh laras
Ketinggian Minimum28.35 Inci
Ketinggian Maksimum46.46 Inci
Cadangan Berat Maksimum176 paun
Bilangan Laci2
Bilangan Rak1
Perhimpunan yang Diperlukanya
Bilangan Orang yang Disyorkan untuk Perhimpunan2

Waranti dan Sokongan

The Claiks Standing Desk comes with a Limited Warranty. For specific warranty details, please refer to the documentation included with your product. For any support inquiries, missing parts, or troubleshooting assistance, please contact Claiks customer service directly.

Visit the Claiks Store for more information: Claiks Store on Amazon

Dokumen Berkaitan - P1.01.002

Praview CLAIKS E9 Standing Desk with Drawers Installation Guide
Comprehensive installation guide for the CLAIKS E9 Standing Desk with Drawers, including safety precautions, specifications, component list, step-by-step assembly instructions, and controller operation details. Learn how to set up and use your adjustable height desk.
Praview Claiks Meja Berdiri 48-inci dengan Pemasangan Laci dan Manual Pengguna
Pemasangan komprehensif dan manual pengguna untuk Meja Berdiri Claiks 48-inci dengan Laci (Model P1.01.002). Termasuk amaran keselamatan, spesifikasi, arahan pemasangan langkah demi langkah, panduan pengendalian pengawal dan kod ralat penyelesaian masalah.
Praview Claiks 48-inch Electric Standing Desk Installation Guide
Detailed installation guide for the Claiks 48-inch (120cm) electric standing desk. Includes assembly steps, component lists, hardware details, controller operation, and troubleshooting for your height-adjustable desk.
Praview Panduan Pemasangan Meja Berdiri Kaca CLAIKS W03
Step-by-step installation guide for the CLAIKS W03 Glass Standing Desk, including component lists, hardware details, safety precautions, controller functions, and error code troubleshooting.
Praview CLAIKS E13 L-Shape Standing Desk Installation Guide
Comprehensive installation guide for the CLAIKS E13 L-Shape Adjustable Height Standing Desk, detailing component lists, assembly steps, and controller operation. Includes safety precautions and troubleshooting.
Praview Claiks Glass Standing Desk Installation Guide
Comprehensive installation guide for the Claiks Glass Standing Desk (48-inch/120cm), covering setup, cable management, and controller operation with multilingual instructions.