Polibi Full Size Loft Bed with Desk and 2-Drawer Cabinet

Maklumat Keselamatan Penting

Sila baca semua arahan dengan teliti sebelum pemasangan dan penggunaan. Simpan manual ini untuk rujukan masa hadapan.

• Kapasiti Berat Maksimum: Jangan melebihi had berat yang disyorkan untuk katil.
• Bahaya Kejatuhan: Ensure all guardrails are properly installed and secured. Do not allow children under 6 years of age on the upper bunk.
• Perhimpunan: Two or more adults are recommended for assembly. Ensure all hardware is tightened securely before use. Periodically check and re-tighten hardware.
• Pengudaraan: Pastikan pengudaraan yang mencukupi di sekeliling katil.
• Keperluan tilam: Use only mattresses that meet the specified dimensions and thickness to ensure proper guardrail height.
• Tiada Permainan Kuda: Larang bermain-main di atas atau di bawah katil.
• Keselamatan Tangga: Sentiasa gunakan tangga untuk masuk dan keluar dari tingkat atas.

Produk Selesaiview dan Dimensi

The Polibi Full Size Loft Bed provides an elevated sleeping area, an integrated desk, and a two-drawer cabinet, optimizing space in your room. Review the overall dimensions before assembly to ensure proper placement.

Senarai Bahagian

Before beginning assembly, carefully unpack all components and identify each part using the list below. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

• Bed Posts (4)
• Side Rails (2 long, 2 short)
• Guardrails (2)
• Bed Slats (approx. 14-16 pieces)
• Ladder (1)
• Atas Meja (1)
• Desk Support Rails (various)
• Writing Board/Back Panel (1)
• 2-Drawer Cabinet (pre-assembled or assembly required for drawers/shelves)
• Cabinet Shelves (2)

Senarai Perkakasan

Ensure all hardware components are present before starting assembly. Use the provided Allen wrench for most fasteners.

• Long Bolts (various sizes)
• Short Bolts (various sizes)
• Kacang Tong
• Wood Screws (for slats)
• Sepana Allen (1)
• Washers (if included)

Arahan Perhimpunan

Follow these steps carefully. Do not fully tighten bolts until instructed, or until the entire section is assembled.

1. Sediakan Kawasan: Clear a spacious area for assembly. Lay out all parts and hardware on a soft, clean surface to prevent scratches.
2. Assemble Bed End Frames: Attach the short side rails to two bed posts using the appropriate bolts and barrel nuts. Repeat for the other end frame. Do not fully tighten yet.
3. Sambungkan Rel Sisi: Connect the two assembled end frames using the long side rails. Ensure the bed frame is square before gently tightening all bolts on the main bed frame.
4. Pasang Bilah Katil: Place the bed slats evenly across the bed frame. Secure each slat to the side rails using the provided wood screws. Ensure slats are firmly attached to provide a stable mattress foundation.

   

5. Pasang Pengawal: Secure the guardrails to the upper bed frame using the designated bolts. Ensure they are firmly attached to prevent falls.

   

6. Assemble and Install Desk: Attach the desk support rails to the bed posts at the desired height. Place the desk top onto the supports and secure it. Install the writing board/back panel behind the desk.

   

7. Kabinet Jawatan: Place the two-drawer cabinet under the desk area as desired. Ensure it is stable and does not obstruct movement.
8. Lampirkan Tangga: Securely attach the ladder to the designated side of the bed frame. Ensure all ladder steps are firmly in place and the ladder is stable.

   

9. Pengetatan Akhir: Setelah semua komponen berada di tempatnya dan sejajar, ketatkan sepenuhnya semua bolt dan skru. Jangan terlalu ketatkan.
10. Pemeriksaan Akhir: Double-check all connections for tightness and stability. Ensure there are no loose parts or sharp edges.

Arahan Operasi

The Polibi Full Size Loft Bed is designed for versatile use, combining a sleeping area with a functional workspace and storage.

• Using the Loft Bed: Access the upper bunk using the integrated ladder. Ensure the mattress fits snugly within the bed frame and below the top edge of the guardrails.
• Menggunakan Meja: The spacious desk area can be used for studying, working, or creative activities. Ensure proper lighting and ergonomic setup for prolonged use.
• Menggunakan Kabinet: The two-shelf cabinet provides convenient storage for books, supplies, or personal items. Place heavier items on the bottom shelf for stability.

Penyelenggaraan dan Penjagaan

Proper care will extend the life and appearance of your Polibi Loft Bed.

• Pembersihan: Lap permukaan dengan lembut, damp kain. Elakkan bahan kimia yang keras atau pembersih yang kasar, kerana ini boleh merosakkan kemasan.
• Pemeriksaan perkakasan: Periodically (every 3-6 months) check all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain structural integrity.
• Elakkan Kelembapan: Lindungi kayu daripada kelembapan berlebihan dan cahaya matahari langsung untuk mengelakkan meledingkan atau pudar.
• Pengagihan Berat: Distribute weight evenly on the bed and shelves to prevent stress on the frame.

Menyelesaikan masalah

If you encounter issues with your loft bed, refer to these common solutions.

• Katil Terasa Goyang: Check all bolts and screws. Ensure they are fully tightened. If the bed is on an uneven surface, try repositioning or adding shims under the legs.
• Parts Don't Align: Loosen all bolts slightly, adjust the parts into alignment, and then re-tighten. Sometimes, parts need to be loosely assembled before final tightening.
• Bunyi Berdecit: Squeaking often indicates loose hardware. Identify the source of the squeak and tighten the corresponding bolts. Applying a small amount of wax or lubricant to contact points can also help.
• Perkakasan/Bagian Hilang: Do not attempt to substitute parts. Contact customer support immediately for replacements.

Spesifikasi Produk

Maklumat Waranti

Polibi products are manufactured with quality and care. For specific warranty details regarding your Full Size Loft Bed, please refer to the warranty card included with your purchase or contact Polibi customer support. Keep your proof of purchase for any warranty claims.

Sokongan Pelanggan

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Polibi customer service. Have your product model number (B0BYNFGDYW) and purchase date ready when you call or email.

Maklumat Hubungan:

• Webtapak: Visit the official Polibi store on Amazon for support resources.
• e-mel: Rujuk dokumentasi pembelian anda untuk sokongan e-mel langsung.
• telefon: Rujuk dokumentasi pembelian anda untuk sokongan telefon terus.