AC Infinity CLOUDFORGE T3 Plant Humidifier User Manual

pengenalan

Thank you for choosing the AC Infinity CLOUDFORGE T3 Plant Humidifier. This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before use to ensure optimal performance and longevity of your humidifier.

The CLOUDFORGE T3 is designed with smart controls and precision vaporization to achieve optimal humidity levels for plant growth, featuring a 4.5L capacity, 10-level precision vaporizer, extendable targeting hose, and a no-leak seal.

Maklumat Keselamatan Penting

Sentiasa ikuti langkah berjaga-jaga keselamatan asas apabila menggunakan peralatan elektrik untuk mengurangkan risiko kebakaran, renjatan elektrik dan kecederaan kepada orang.

• Baca semua arahan sebelum menggunakan perkakas.
• Jangan kendalikan sebarang perkakas dengan kord atau palam yang rosak, atau selepas perkakas tidak berfungsi atau terjatuh atau rosak dalam apa jua cara.
• Jangan gunakan di luar rumah.
• Cabut plag dari soket apabila tidak digunakan dan sebelum membersihkan.
• Do not allow children to operate the humidifier without supervision.
• Use only clean, distilled water to prevent mineral buildup.

Kandungan Pakej

Pastikan semua komponen berada dalam keadaan baik dan lengkap:

• AC Infinity CLOUDFORGE T3 Humidifier Unit
• Extendable Tubing
• Probe Sensor
• Penyesuai Kuasa
• Manual Pengguna (dokumen ini)

Image: The AC Infinity CLOUDFORGE T3 humidifier unit, showing the main body, transparent water tank, extendable hose, and sensor probe.

Persediaan

1. penempatan: Place the humidifier on a flat, stable, and water-resistant surface. Ensure it is not directly exposed to sunlight or heat sources.
2. Isi Tangki Air: Remove the top cover and fill the water tank with clean, distilled water. Do not exceed the maximum fill line. Replace the cover securely.

   Video: A short demonstration of filling the humidifier's water tank. The video shows the top cover being removed and water being poured into the tank, then the cover being replaced.

3. Sambungkan Prob Sensor: Insert the sensor probe into the designated port on the humidifier. Position the probe in your grow space to accurately measure humidity and temperature.
4. Attach Extendable Tubing: Connect the extendable tubing to the humidifier's mist outlet. Direct the tubing towards the area where humidity is desired.
5. Hidupkan kuasa: Plug the power adapter into the humidifier and then into a suitable electrical outlet. The display will illuminate.

Image: The CLOUDFORGE T3 humidifier positioned inside a grow tent, illustrating its typical setup and use in a plant cultivation environment.

Arahan Operasi

Panel Kawalan Terlaluview

Imej: A terperinci view of the humidifier's control panel, highlighting the display and various control buttons for setting humidity, VPD, and timer functions.

• paparan: Shows current humidity, temperature, VPD, and settings.
• Butang Mod: Cycles through operating modes (e.g., Auto, Manual, Timer).
• Butang Naik / Turun: Adjust target humidity, VPD, or timer settings.
• Butang Tetapan: Access advanced settings and calibration.

Operasi Asas

1. Hidupkan/Mati Kuasa: Tekan dan tahan butang kuasa untuk menghidupkan atau mematikan unit.
2. Set Target Humidity: Use the Up/Down buttons to set your desired humidity level. The unit will automatically adjust mist output to reach and maintain this level.
3. VPD Control: The CLOUDFORGE T3 features VPD (Vapor Pressure Deficit) control. Refer to the advanced settings for configuring VPD targets.
4. Mist Output Levels: The unit offers 10 levels of precision mist output. These can be adjusted manually or automatically based on your settings.

Image: A close-up of the humidifier's digital display, showing current humidity, temperature, and VPD readings, indicating the unit's precise environmental monitoring capabilities.

App Control and Integration

The CLOUDFORGE T3 can be controlled and monitored via the AC Infinity app, allowing for remote adjustments, scheduling, and data logging. It can also integrate with other UIS™ platform devices for a unified grow ecosystem.

Image: An illustration showing the AC Infinity CLOUDFORGE T3 humidifier connected wirelessly to a smartphone running the AC Infinity app, and also to a central controller, demonstrating its smart integration capabilities.

Penyelenggaraan

Regular maintenance ensures the longevity and efficient operation of your humidifier.

1. Harian: Check water level and refill with distilled water as needed.
2. Mingguan:
   • Empty and rinse the water tank to prevent mineral buildup and bacterial growth.
   • Clean the ultrasonic vaporizer with a soft brush or cloth to remove any residue.
3. Bulanan:
   • Descale the unit using a vinegar solution (1 part white vinegar to 1 part water). Let it soak for 30 minutes, then rinse thoroughly.
   • Clean the sensor probe with a damp kain.

Awas: Always unplug the unit before performing any cleaning or maintenance. Do not immerse the main unit in water.

Menyelesaikan masalah

Spesifikasi

Image: A technical diagram detailing the specifications of the CLOUDFORGE T3, including its dimensions, capacity, output rate, and the lengths of the flexible hose and sensor probe.

Waranti dan Sokongan

AC Infinity products are designed with quality and durability in mind. For warranty information and technical support, please visit the official AC Infinity webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung.

Official AC Infinity Store: Kedai AC Infinity di Amazon

For additional assistance, you may refer to the official User Manual PDF: Manual Pengguna (PDF)