AXIS F9114 Main Unit User Manual

pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Axis F9114 Main Unit. Please read this manual carefully before using the product to ensure proper functionality and safety.

Produk Selesaiview

The AXIS F9114 is a main unit designed for the F-Series surveillance system. It supports up to four F21 or F7 sensor units, providing a flexible and discreet surveillance solution. This unit acts as the central processing hub for connected camera sensors.

Rajah 1: Depan view of the AXIS F9114 Main Unit, showing camera input ports (CAM 1-4), audio input/output, power input, I/O ports, and an Ethernet port with PoE support.

Ciri-ciri Utama:

• Supports up to 4 Axis F-Series sensor units (e.g., F21, F7).
• Central processing unit for video and audio streams.
• Compact design for flexible installation.
• Integrated Power over Ethernet (PoE) for simplified power and data connectivity.
• Multiple I/O ports for external device integration.
• Audio input/output capabilities.

Persediaan dan Pemasangan

Kandungan Pakej:

• AXIS F9114 Main Unit
• Panduan Pemasangan
• (Power supply and sensor units sold separately, unless specified)

Connecting Sensor Units:

1. Ensure the main unit is powered off before connecting any sensor units.
2. Connect the cables from your AXIS F-Series sensor units (e.g., F21, F7) to the designated "CAM 1", "CAM 2", "CAM 3", and "CAM 4" ports on the rear of the F9114 Main Unit. Ensure a secure connection.
3. Each sensor unit requires a dedicated port.

Mengkuasakan Unit:

• Kuasa Ethernet (PoE): Connect an Ethernet cable from a PoE-enabled switch or injector to the "PoE" port on the F9114. This will provide both power and network connectivity.
• Bekalan Kuasa Luaran: If PoE is not used, connect a compatible DC power adapter (not included) to the "PWR" input terminal. Refer to specifications for voltage keperluan.

Sambungan Rangkaian:

Connect an Ethernet cable from your network to the "PoE" port on the F9114. This provides network access for configuration and video streaming.

Sambungan Audio dan I/O:

• Audio: Connect external microphones to "IN 1" or "IN 2" and speakers to "OUT" if audio functionality is required.
• I/O: Use the "IO" terminal block for connecting external devices such as alarm sensors or relays. Refer to the detailed wiring diagram in the full technical documentation for specific connections.

Operasi

Kuasa Permulaan:

Once all connections are secure and power is supplied, the unit will begin its startup sequence. Observe the LED indicators for status.

Penunjuk LED:

• PWR (Kuasa): Indicates power status. (e.g., Solid green for normal operation).
• STAT (Status): Indicates operational status. (e.g., Flashing for network activity, solid for ready).
• NET (Network): Indicates network connection and activity.

Mengakses Peranti:

1. Use the AXIS IP Utility or a network scanner to discover the IP address of the F9114 on your network.
2. Buka a web browser and enter the IP address to access the device's web antara muka.
3. Log in using the default credentials (refer to the installation guide or Axis website for current defaults).
4. Follow the on-screen instructions to configure network settings, video streams, and other system parameters.

Pengurusan Video:

The F9114 integrates with various video management software (VMS) solutions. Refer to your VMS documentation for adding and managing the device.

Penyelenggaraan

• Pembersihan: Gunakan kain lembut dan kering untuk membersihkan bahagian luar unit. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
• Kemas kini Firmware: Regularly check the Axis Communications weblaman web untuk kemas kini perisian tegar. Mengemas kini perisian tegar memastikan prestasi, keselamatan dan akses kepada ciri baharu yang optimum.
• Keadaan Persekitaran: Ensure the unit is operated within its specified temperature and humidity ranges to prevent damage.

Menyelesaikan masalah

Isu dan Penyelesaian Biasa:

• Tiada Kuasa:
  • Verify power cable connection (if using external power).
  • Ensure PoE switch/injector is active and providing power (if using PoE).
  • Periksa sumber kuasa.
• Tiada Sambungan Rangkaian:
  • Periksa sambungan kabel Ethernet.
  • Sahkan fungsi suis/penghala rangkaian.
  • Confirm IP address settings are correct or DHCP is functioning.
• No Video from Sensor Unit:
  • Ensure sensor unit cables are securely connected to the F9114.
  • Verify the sensor unit is compatible with the F9114.
  • Check the sensor unit's status indicators (if available).
  • Access the F9114 web interface to confirm sensor unit detection and configuration.
• Lupa kata laluan:

  Refer to the Axis Communications support documentation for password reset procedures, which typically involve a factory reset button or specific software tools.

For more detailed troubleshooting, refer to the comprehensive support resources available on the Axis Communications webtapak.

Spesifikasi

Note: Specifications are subject to change without notice. For the most current information, please refer to the official Axis Communications webtapak.

Waranti dan Sokongan

Maklumat Waranti:

For detailed warranty information, please refer to the warranty statement provided with your product or visit the official Axis Communications webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.

Sokongan Teknikal:

If you encounter issues that cannot be resolved using this manual or the troubleshooting section, please contact Axis Communications technical support. Support resources, including FAQs, documentation, and contact information, are available on their official webtapak.

Webtapak: www.axis.com/support