CAD Audio WX1000HH UHF Wireless Handheld Microphone System

pengenalan

The CAD Audio WX1000HH is a frequency agile UHF wireless handheld microphone system designed for clear and reliable audio transmission. Operating in the 510-570mHz frequency band, it offers 100 selectable channels to ensure optimal signal clarity and minimize interference. This system features convenient auto-scan and IR sync functions for quick setup and channel changes. Built with durable all-metal construction, the WX1000HH is suitable for various demanding environments. This manual provides essential information for setting up, operating, and maintaining your wireless microphone system.

Kandungan Pakej

Sila sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

• WX1000HH Handheld Microphone Transmitter
• WX1000 UHF Wireless Receiver
• Power Adapter for Receiver
• Klip Mikrofon
• Rack Mount Hardware
• Antenna Relocation Kit
• Audio Cable (likely 1/4" TS to 1/4" TS or XLR to 1/4" TS)
• Manual Pengguna (dokumen ini)

Imej 1: All components of the CAD Audio WX1000HH system, including the handheld microphone, receiver, power adapter, microphone clip, rack mount hardware, antenna relocation kit, and an audio cable.

Persediaan

1. Persediaan Penerima

1. penempatan: Position the WX1000 receiver on a stable, flat surface or install it into a standard equipment rack using the included rack mount hardware. Ensure adequate ventilation around the unit.
2. Sambungan Antena: Connect the included antennas to the ANT connectors on the rear panel of the receiver. If rack-mounting, use the antenna relocation kit to position the antennas for optimal reception.
3. Sambungan Kuasa: Connect the supplied power adapter to the DC INPUT on the rear of the receiver and then plug it into a suitable AC power outlet.
4. Output Audio: Connect the receiver's audio output (Balanced XLR or Unbalanced 1/4" TS) to your mixer, amplifier, or PA system using an appropriate audio cable.

Imej 2: The WX1000 UHF Wireless Receiver shown with rack mount ears attached, ready for installation into an equipment rack.

Imej 3: Rear panel of the WX1000 receiver, showing the ANT connectors, Balanced XLR output, Unbalanced 1/4" TS output, and DC INPUT for power.

2. Handheld Microphone Setup

1. Pemasangan Bateri: Unscrew the bottom cap of the handheld microphone. Insert two fresh AA batteries, observing the correct polarity (+/-) as indicated inside the battery compartment.
2. Penutup Selamat: Screw the bottom cap back onto the microphone securely.

Imej 4: The CAD Audio WX1000HH handheld microphone with its bottom cap removed, revealing the battery compartment for two AA batteries.

Arahan Operasi

1. Menghidupkan/Mematikan

• Penerima: Press the Power button on the front panel of the receiver. The display will illuminate.
• Mikrofon pegang tangan: Press and hold the power button on the microphone body until the display illuminates.

2. Channel Selection and Synchronization (IR Sync)

The WX1000HH system features 100 switchable UHF frequencies and an auto-scan function to find clear channels. Up to 20 systems can be used simultaneously.

1. Auto-Imbas: On the receiver, press the "SET" button to initiate an auto-scan. The receiver will search for and select an available, interference-free frequency.
2. Penyegerakan IR: Once the receiver has selected a frequency, align the IR window on the handheld microphone with the IR sensor on the receiver (usually near the display). Press the "IR Sync" or "SET" button on the receiver (refer to receiver display for specific prompt). The frequency information will be transmitted to the microphone, synchronizing the two units.
3. Pengesahan: Confirm that the frequency displayed on the microphone matches the frequency on the receiver.

Imej 5: Close-up of the CAD Audio WX1000HH handheld microphone's display, showing frequency and battery level indicators.

3. Petunjuk Tahap Bateri

Both the handheld microphone transmitter and the receiver feature battery level indicators. Monitor these indicators to ensure uninterrupted operation. The handheld microphone provides over 12 hours of operation with two AA batteries.

4. Julat Operasi

The system offers an operating range of up to 295 feet (90 meters) between the transmitter and receiver under optimal conditions. Environmental factors, obstacles, and other wireless devices can affect this range.

5. Kegunaan yang Disyorkan

This system is suitable for various applications including singing, speech, and karaoke.

Penyelenggaraan

• Pembersihan: Use a soft, dry cloth to clean the exterior of the receiver and microphone. Do not use liquid cleaners or solvents.
• Penggantian Bateri: Replace AA batteries in the handheld microphone when the low battery indicator appears. Always use fresh, high-quality batteries. Remove batteries if the microphone will not be used for an extended period.
• Storan: Simpan sistem di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

For warranty information and technical support, please refer to the official CAD Audio webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan resit pembelian anda sebagai bukti pembelian untuk sebarang tuntutan waranti.

CAD Audio Official Webtapak: www.cadaudio.com