Remco KP5200KXW/O

Remco 6T70 6T75E (13-15) Gen 3 Transmission Banner Kit Instruction Manual

Model: KP5200KXW/O

pengenalan

This instruction manual provides essential information for the proper installation, operation, and maintenance of your Remco 6T70 6T75E (13-15) Gen 3 Transmission Banner Kit. This kit is designed for automatic transmissions and includes an overhaul kit and clutches, providing the necessary components for a comprehensive transmission rebuild. Please read this manual thoroughly before beginning any work to ensure safe and correct procedures.

Apa yang ada dalam Kotak

Your Remco Transmission Banner Kit includes the following components:

Remco 6T70 6T75E Gen 3 Transmission Banner Kit components including the box, various gaskets, seals, and clutch plates.

Image: Contents of the Remco 6T70 6T75E Gen 3 Transmission Banner Kit. The image displays the product packaging box, along with various components laid out, including a full set of gaskets, seals, and a collection of clutch and steel plates, essential for a complete transmission overhaul.

Ciri-ciri Produk

Keserasian

This transmission banner kit is compatible with the following vehicle models and years. Please verify your vehicle's specifications before installation.

Model KenderaantahunEnjin
Acadia2007 - 20173.6 /V6
Acadia2013 - 20153.6 /V6
Aura2007 - 20103.6 /V6
Captiva2013 - 20153.6 /V6
Enklaf2008 - 20113.6 /V6
Enklaf2013 - 20173.6 /V6
Ekuinoks2013 - 20153.6 /V6
Equinox Sport2008 - 20133.0, 3.6 /V6
G62007 - 20103.6 /V6
Impala2013 - 20172.5, 3.6 /L4, V6
LaCrosse2011 - 20113.6 /V6
LaCrosse2013 - 20153.6 /V6
Malibu2008 - 20113.5, 3.6 /V6
Malibu Klasik2008 - 20083.5 /V6
Tinjauan2007 - 20103.6 /V6
SRX2010 - 20133.0, 3.6 /V6
SRX2013 - 20163.0, 3.6 /V6
rupa bumi2010 - 20133.0, 3.6 /V6
rupa bumi2013 - 20153.6 /V6
Torrent2008 - 20103.6 /V6
Melintasi2009 - 20103.6 /V6
Melintasi2013 - 20173.6 /V6
VUE2008 - 20093.6 /V6
XL-72009 - 20093.6 /V6
XTS2013 - 20173.6 /V6

Persediaan dan Pemasangan

Installing a transmission rebuild kit requires specialized knowledge and tools. It is highly recommended that installation be performed by a certified automotive technician. Improper installation can lead to severe damage to the transmission and vehicle.

General Steps (Professional Installation Recommended):

  1. Penyediaan: Ensure the vehicle is safely lifted and secured. Drain transmission fluid and remove the transmission from the vehicle.
  2. Pembongkaran: Carefully disassemble the transmission, noting the order and orientation of all components. Refer to a specific service manual for your vehicle's transmission model.
  3. Pemeriksaan: Inspect all hard parts for wear, damage, or scoring. Replace any worn components not included in this kit as necessary.
  4. Penggantian Komponen: Replace all seals, gaskets, O-rings, clutch plates, and steel plates with the new components from the Remco kit. Ensure all new parts are properly lubricated with clean transmission fluid before installation.
  5. Pemasangan semula: Reassemble the transmission following the reverse order of disassembly. Pay close attention to torque specifications for all bolts.
  6. Pemasangan: Reinstall the rebuilt transmission into the vehicle. Connect all lines, sensors, and electrical connectors.
  7. Isi Bendalir: Fill the transmission with the manufacturer-specified type and amount of new transmission fluid.
  8. Semakan Awal: Perform initial checks for leaks and proper fluid levels.

Nota: This kit provides the necessary components for a rebuild. Detailed step-by-step instructions for transmission disassembly and reassembly are specific to each transmission model and are typically found in a dedicated factory service manual for your vehicle.

Garis Panduan Operasi

After a transmission rebuild, proper break-in and careful operation are crucial for longevity.

Penyelenggaraan

Regular maintenance is key to extending the life of your rebuilt transmission.

Menyelesaikan masalah

This section provides general troubleshooting tips. For complex issues, consult a qualified technician.

MasalahKemungkinan PuncaPenyelesaian
Penghantaran tergelincirLow fluid level, worn clutches (unlikely with new kit), internal pressure issues.Check fluid level and add if low. If problem persists, professional diagnosis is required.
Harsh shiftingIncorrect fluid level, faulty sensor, valve body issue.Verify fluid level. Consult a technician for diagnostic scan and repair.
Kebocoran cecairImproperly seated gasket/seal, damaged pan, loose bolts.Inspect for source of leak. Tighten bolts to spec, replace gasket/seal if damaged.
Tiada penglibatan dalam gearSeverely low fluid, internal mechanical failure.Check fluid level. If fluid is adequate, immediate professional inspection is needed.

Spesifikasi

AtributPerincian
PengeluarRemco
JenamaRemco
Berat Barang2722 paun
Dimensi Produk18 x 5 x 16 inci
Nombor Bahagian PengilangKP5200KXW/O
ASINB0BVL747JG
Tarikh Mula-mula Tersedia12 Februari 2023

Waranti dan Sokongan

Untuk maklumat jaminan dan sokongan pelanggan, sila rujuk perkara berikut:

Dokumen Berkaitan - KP5200KXW/O

Praview REMCO LP-HP023 Arahan Pemasangan Pam Pelincir
Panduan pemasangan terperinci untuk REMCO LP-HP023 Lube Pump and Plumbing Hardware Pack, direka untuk transmisi Toyota tertentu termasuk model Tacoma, Tundra, FJ Cruiser dan 4Runner.
Praview 4L80E & 4L85E Automatic Transmission Parts Catalog
Comprehensive parts catalog for 4L80E and 4L85E automatic transmissions, including kits, filters, friction plates, steel plates, seals, bearings, and more, with part numbers and specifications.
Praview Kit Penguat Tekanan Talian Sonnax 6L80-LB1 untuk Transmisi GM - Panduan Pemasangan dan Teknikal
Arahan terperinci dan maklumat teknikal untuk Kit Penggalak Tekanan Talian Sonnax 6L80-LB1, direka untuk meningkatkan prestasi transmisi GM. Termasuk langkah pemasangan, faedah dan produk Sonnax yang berkaitan.
Praview Manual Pengguna Papan Induk JGINYUE dan Spesifikasi
Manual pengguna untuk papan induk JGINYUE oleh ERYING TECHNOLOGY, memperincikan jaminan, penerangan antara muka, langkah berjaga-jaga pemasangan dan spesifikasi teknikal.
Praview Manual Dispositivo di Controllo Touch K50 I/O dengan Sepanduk Paparan
Questo manuale fornisce informazioni complete sul dispositivo di controllo touch K50 I/O con display di Banner. Copre panoramica del prodotto, specifiche, schemi di cablaggio, accessori and procedures di manutenzione per applicazioni in automazione industriale.
Praview Zone 2/Division 2์šฉ IS1+ CPU ๋ชจ๋“ˆ ์‚ฌ์šฉ์ž ์„ค๋ช…์„œ - R. STAHL
R. STAHL Zone 2/Division 2์šฉ IS1+ CPU ๋ชจ๋“ˆ (์‹œ๋ฆฌ์ฆˆ 9442/35) ์‚ฌ์šฉ์ž ์„ค๋ช…์„œ. ์„ค์น˜, ์ž‘๋™, ์•ˆ์ „ ์ง€์นจ ๋ฐ ๊ธฐ์ˆ  ๋ฐ์ดํ„ฐ์— ๋Œ€ํ•œ ์ •๋ณด๋ฅผ ์ œ๊ณตํ•ฉ๋‹ˆ๋‹ค.