Manual Arahan Pengisar Berganda Parkside PDOS 200 C2

1. Produk Lebihview

The Parkside PDOS 200 C2 Double Grinder is a versatile power tool designed for grinding, sharpening, deburring, and derusting various metal and steel workpieces. It features a quiet, maintenance-free induction motor and two grinding wheels for both coarse and fine applications. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.

Imej 1.1: The Parkside PDOS 200 C2 Double Grinder. This image shows the complete unit from a slight angle, highlighting its two grinding wheels, protective covers, and the central motor housing with the power switch.

2. Arahan Keselamatan

Sentiasa patuhi langkah keselamatan berikut untuk mengelakkan kejutan elektrik, kebakaran dan kecederaan serius.

• Baca Manual: Before operating the grinder, read and understand all instructions and safety warnings.
• Alat Pelindung Diri (PPE): Always wear safety glasses or a face shield, hearing protection, and appropriate work gloves.
• Kawasan Kerja: Keep the work area clean, well-lit, and free from clutter. Ensure adequate ventilation.
• Keselamatan Elektrik: Ensure the power supply matches the grinder's specifications. Do not operate in damp atau keadaan basah.
• Bahan Kerja Selamat: Always hold the workpiece firmly against the work rest.
• Maintain Guards: Never operate the grinder without the protective covers and spark guards properly installed and adjusted.
• Elakkan melampaui batas: Kekalkan pijakan dan keseimbangan yang betul pada setiap masa.
• Cabut plag Apabila Tidak Digunakan: Disconnect the grinder from the power supply before making adjustments, changing accessories, or when not in use.
• Periksa Sebelum Penggunaan: Check for damaged parts, misalignment, or any condition that may affect operation.

3. Kandungan Pakej

Carefully unpack all items and check for completeness. If any parts are missing or damaged, contact customer support.

• Parkside PDOS 200 C2 Double Grinder unit
• 1x Coarse grinding wheel (Grit 36)
• 1x Fine grinding wheel (Grit 80)
• 2x Spark protection glasses
• 2x Work rests
• Mounting hardware (if applicable for bench mounting)
• Manual Arahan

4. Persediaan

4.1 Bench Mounting

For stable and safe operation, the double grinder should be securely mounted to a workbench. Use appropriate bolts and nuts (not always included) to fasten the grinder through the mounting holes in its base.

4.2 Installing Spark Protection Glasses and Work Rests

1. Attach the spark protection glasses to the designated brackets above each grinding wheel. Ensure they are securely fastened and positioned to protect your eyes from sparks and debris.
2. Install the work rests in front of each grinding wheel. Adjust their position so that the gap between the work rest and the grinding wheel is no more than 2 mm. This gap should be maintained as the wheel wears down. The work rests are tool-free adjustable.

Imej 4.1: Depan view of the grinder, showing the spark protection glasses and adjustable work rests in position. The image also depicts sparks generated during grinding, illustrating the function of the protective elements.

4.3 Sambungan Kuasa

Connect the power cable to a suitable electrical outlet. Ensure the power switch is in the "OFF" position before plugging in the unit.

5. Arahan Operasi

5.1 Menghidupkan/Mematikan

• To turn on the grinder, press the dust-protected ON (I) switch.
• To turn off the grinder, press the OFF (O) switch.
• Allow the grinding wheels to reach full speed before beginning work.

5.2 Teknik Mengisar

The PDOS 200 C2 features two grinding wheels:

• Coarse Grinding Wheel (Grit 36): Use for rapid material removal, shaping, and initial sharpening of dull tools.
• Fine Grinding Wheel (Grit 80): Use for finishing, fine sharpening, and deburring.

When grinding:

1. Sentiasa memakai PPE yang sesuai.
2. Hold the workpiece firmly against the work rest.
3. Apply light, even pressure. Excessive pressure can damage the wheel or motor.
4. Move the workpiece across the face of the wheel to ensure even wear.
5. Avoid grinding on the side of the wheel, as this can cause the wheel to break.
6. For sharpening, maintain a consistent angle against the wheel.
7. Allow the workpiece to cool periodically to prevent overheating and damage to the material.

6. Penyelenggaraan

Penyelenggaraan tetap memastikan umur panjang dan operasi yang selamat bagi pengisar anda.

• Pembersihan: Disconnect from power. Use a brush or compressed air to remove dust and debris from the motor housing and around the wheels.
• Pemeriksaan Roda: Regularly inspect grinding wheels for cracks, chips, or excessive wear. Replace damaged or worn wheels immediately.
• Pelarasan Rehat Kerja: Ensure the gap between the work rest and the grinding wheel remains at a maximum of 2 mm. Adjust as the wheel wears.
• Spark Guard Inspection: Check spark protection glasses for cracks or excessive scratching that may impair visibility. Replace if necessary.
• Motor: Motor aruhan adalah bebas penyelenggaraan dan tidak memerlukan pelinciran.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, spare parts, or warranty claims, please contact your retailer or the manufacturer's customer service department.

Simpan resit pembelian anda sebagai bukti pembelian untuk tujuan waranti.