pengenalan
Terima kasih kerana membeliasing the Gemini GRP-100 Belt Drive USB Turntable. This manual provides essential information for the proper setup, operation, and maintenance of your new turntable. Please read these instructions thoroughly before use to ensure optimal performance and longevity of your device.
Arahan Keselamatan
- Jangan dedahkan unit kepada hujan atau lembapan.
- Jangan tanggalkan penutup. Tiada bahagian yang boleh diservis pengguna di dalam. Rujuk servis kepada kakitangan yang berkelayakan.
- Pastikan kord kuasa tidak tersepit atau berjalan.
- Cabut palam unit semasa ribut petir atau apabila tidak digunakan untuk tempoh yang lama.
- Place the turntable on a stable, level surface away from direct sunlight, heat sources, or excessive vibration.
Kandungan Pakej
Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:
- Gemini GRP-100 Belt Drive USB Turntable
- Kabel USB
- Power adapter (integrated or separate, depending on region)
- Slipmat
- Kaunter berat badan
- Penyesuai 45 RPM
Produk Selesaiview
The Gemini GRP-100 is a belt-drive turntable designed for playing vinyl records and converting them to digital audio via USB. Key components include the platter, tonearm assembly, pitch control, and playback buttons.
Satu overhed view of the Gemini GRP-100 turntable, showcasing the platter, tonearm, pitch control slider, and start/stop buttons. The Gemini GRP-100 logo is visible on the chassis.
- Pinggan: The rotating surface where records are placed.
- Tonearm: Memegang kartrij dan stylus, yang membaca alur rekod.
- Kawalan Padang: Slider to adjust the playback speed.
- Butang Mula/Berhenti: Controls platter rotation.
- Output USB: For connecting to a computer for digital conversion.
Persediaan
- Bongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
- penempatan: Position the turntable on a flat, stable surface. Ensure adequate ventilation and avoid placing it near speakers to prevent feedback.
- Pemasangan Pinggan: Place the platter onto the spindle. Ensure it sits correctly.
- Pemasangan Tali Pinggang: Locate the drive belt and carefully stretch it around the inner rim of the platter and over the motor pulley.
- Tikar Licin: Letakkan slipmat di atas pinggan.
- Berat kontra: Attach the counterweight to the rear of the tonearm. Adjust it to balance the tonearm horizontally. Refer to the cartridge manufacturer's recommendations for the correct tracking force.
- Sambungan Kuasa: Connect the power cord to the turntable and then to a suitable AC power outlet.
- Sambungan Audio: Connect the RCA audio output cables (not included) from the turntable to the PHONO input of your amppenguat atau penerima. Jika anda amplifier does not have a PHONO input, you may need an external phono preamplebih hidup.
- Sambungan USB (Pilihan): Connect the supplied USB cable from the turntable to an available USB port on your computer for digital recording.
Arahan Operasi
- Hidupkan kuasa: Pastikan meja putar disambungkan kepada kuasa.
- Pilih Kelajuan: Choose the appropriate speed (33 1/3 or 45 RPM) for your record using the speed selector buttons. For 45 RPM records, place the 45 RPM adapter on the spindle if the record has a large center hole.
- Rekod Tempat: Letakkan rekod vinil anda dengan berhati-hati di atas alas slip.
- Mulakan Pinggan: Tekan butang START/STOP untuk memulakan putaran pinggan.
- Tonearm Kedudukan: Gently lift the tonearm using the cueing lever and move it over the desired track on the record.
- Tonearm Bawah: Slowly lower the tonearm onto the record using the cueing lever. The stylus will begin playing the record.
- Laraskan Padang: Use the PITCH slider to fine-tune the playback speed if necessary.
- Hentikan Main Balik: At the end of the record, or when you wish to stop, lift the tonearm using the cueing lever and return it to the tonearm rest. Press the START/STOP button to halt platter rotation.
- Rakaman USB: When connected to a computer via USB, the turntable acts as an audio input device. Use appropriate recording software (not included) on your computer to capture the audio from your records.
Penyelenggaraan
- Membersihkan Stylus: Gunakan berus lembut yang direka untuk pembersihan stylus, memberus perlahan-lahan dari belakang ke hadapan.
- Membersihkan Meja Putar: Lap unit dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut yang melelas.
- Penjagaan Rekod: Keep your records clean and stored vertically in their sleeves to prevent dust accumulation and warping.
- Penggantian Tali Pinggang: The drive belt may need replacement after extended use. Consult Gemini support for replacement parts.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada kuasa | Kord kuasa tidak disambungkan; soket tidak aktif. | Ensure power cord is securely connected to the unit and a working outlet. |
| Tiada bunyi | RCA cables not connected; amplifier input incorrect; volume low. | Check RCA connections; select correct input on amplifier; increase volume. Ensure phono pre-amp is used if needed. |
| Meja putar tidak berputar | Belt dislodged or broken; START/STOP button not pressed. | Check belt placement; press START/STOP button. |
| Melangkau atau bunyi herot | Stylus dirty or worn; tracking force incorrect; record dirty or damaged. | Clean stylus; adjust counterweight for correct tracking force; clean record. |
Spesifikasi
- Nama Model: GRP-100
- Jenama: Gemini
- Jenis Motor: Motor AC
- Jenis Drive: Pemacu Belt
- Format Isyarat: Analog, Digital (via USB)
- Sumber Kuasa: Elektrik Bertali
- Komponen yang Disertakan: Kabel USB
- Peranti Serasi: Speaker, Headphone, Personal Computer, Laptop
- warna: Hitam
- gaya: moden
Waranti dan Sokongan
For warranty information and technical support, please refer to the warranty card included with your product or visit the official Gemini webtapak. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.
For further assistance, you may contact Gemini customer support through their official channels.
