Lenz rcB 1200

Manual Pengguna Pek Litium Lenz rcB 1200

Model: rcB 1200

pengenalan

This manual provides essential information for the safe and effective use of your Lenz Lithium Pack rcB 1200. Please read it thoroughly before operating the device and retain it for future reference.

The Lenz Lithium Pack rcB 1200 is a lightweight, rechargeable battery pack designed to power various Lenz heated products, including socks, vests, bandages, and gloves. It offers adjustable heat settings and can be controlled via the pack itself or remotely using a smartphone via Bluetooth.

Kandungan Pakej

Arahan Keselamatan

Sentiasa patuhi langkah berjaga-jaga keselamatan berikut untuk mengelakkan kecederaan atau kerosakan pada peranti:

Persediaan

Mengecas Pek Bateri

Before first use, fully charge both Lithium Pack rcB 1200 battery packs.

  1. Connect the USB charging cable to the global USB-charger.
  2. Plug the USB-charger into a standard electrical outlet (100-240 VAC).
  3. Connect the charging cable to the charging port on each Lithium Pack rcB 1200. The charging port is typically located on the side or bottom of the pack.
  4. The charging indicator on the USB cable will show the charging status. A full charge typically takes several hours.
  5. Once fully charged, disconnect the battery packs from the charger.
Lenz Lithium Pack rcB 1200 battery packs and charging cable

Image: Two Lenz Lithium Pack rcB 1200 battery packs. One pack shows the power button and heat level indicators. The other pack shows the snap connectors. Below, a battery pack is shown connected to a charging cable.

Attaching to Heated Products

The Lithium Pack rcB 1200 attaches to compatible Lenz heated products using press studs.

  1. Locate the press studs on your Lenz heated socks, vest, bandage, or gloves.
  2. Align the press studs on the battery pack with those on the heated product.
  3. Firmly press the battery pack onto the product until the studs click into place, ensuring a secure connection.

Arahan Operasi

Powering On/Off and Adjusting Heat Levels (Manual Control)

Each battery pack has a power button and indicators for heat levels.

  1. Untuk Menghidupkan: Press and hold the power button (usually marked with a 'G' or power symbol) on the battery pack for a few seconds until the indicator lights illuminate.
  2. To Adjust Heat Level: Briefly press the power button to cycle through the three available heat settings. The indicator lights (1, 2, 3) will show the current heat level.
    • Level 1: Lowest heat setting.
    • Level 2: Medium heat setting.
    • Level 3: Highest heat setting.
  3. Untuk Mematikan: Press and hold the power button again for a few seconds until all indicator lights turn off.

Smartphone Control (Bluetooth Smart Ready)

The Lithium Pack rcB 1200 can be controlled remotely via a smartphone application.

  1. Download the official Lenz Heat App from your smartphone's app store (iOS or Android).
  2. Pastikan Bluetooth didayakan pada telefon pintar anda.
  3. Open the Lenz Heat App and follow the on-screen instructions to pair your Lithium Pack rcB 1200 battery packs. The app will guide you through the pairing process.
  4. Once paired, you can use the app to power the packs on/off, adjust heat levels, and monitor battery status.

Penyelenggaraan

Pembersihan

To clean the battery packs, gently wipe them with a damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the packs are completely dry before storing or recharging.

Penyimpanan

When storing the battery packs for extended periods, ensure they are charged to approximately 50-70% capacity. Store them in a cool, dry place away from direct sunlight and extreme temperatures. Recharge them every 3-6 months to maintain battery health.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Battery pack not turning on.Bateri habis.Caskan pek bateri sepenuhnya.
Pek bateri tidak dicas.Pengecas atau kabel rosak; sambungan tidak betul.Ensure charger and cable are properly connected. Try a different USB port or outlet. Verify charger is functional.
Heated product not heating.Battery pack not securely attached; battery pack not powered on; battery pack depleted.Ensure battery pack is securely attached via press studs. Power on the battery pack. Charge the battery pack.
Tidak dapat menyambung melalui Bluetooth.Bluetooth not enabled on phone; battery pack not in pairing mode; app issue.Ensure Bluetooth is on. Restart battery pack and phone. Reinstall Lenz Heat App. Follow app pairing instructions carefully.

Spesifikasi

Waranti dan Sokongan

For warranty information and technical support, please refer to the official Lenz webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan bukti pembelian anda untuk tuntutan waranti.

Pengeluar: Lenz

Webtapak: www.lenzproducts.com (Cthamppautan le, pautan sebenar mungkin berbeza-beza)

Dokumen Berkaitan - rcB 1200

Praview Pek litium LENZ rcB 1400 / rcB 2000 Manual Pengguna Sistem Haba Badan dan Arahan Keselamatan
Langkah berjaga-jaga keselamatan yang komprehensif dan arahan pengendalian untuk pek litium LENZ rcB 1400 dan Sistem Haba Badan rcB 2000. Ketahui tentang pengecasan, penggunaan, ciri keselamatan dan penyelenggaraan untuk prestasi optimum.
Praview Manual Pengguna Lenz lithium pack insole rcB 1200
Manual pengguna yang komprehensif untuk insole pek litium Lenz rcB 1200, memperincikan operasi, keselamatan dan penyelenggaraan. Ketahui cara menggunakan dan menjaga insole anda yang dipanaskan.
Praview Arahan Keselamatan LENZ untuk Produk Tekstil dan Elektronik
Arahan keselamatan untuk produk LENZ yang menggabungkan tekstil dan elektronik, menekankan penggunaan Pek Litium LENZ yang serasi dan pematuhan kepada langkah berjaga-jaga keselamatan untuk mengelakkan kejutan elektrik, kebakaran dan kecederaan.
Praview Arahan Keselamatan dan Penjagaan Pakaian Dipanaskan LENZ
Garis panduan keselamatan dan penjagaan untuk pakaian dipanaskan LENZ, memperincikan pencucian, pengeringan dan penggunaan dengan Pek Litium LENZ untuk mengelakkan kejutan elektrik, kebakaran dan kecederaan.