Westbrass C0136-50 Contemporary Cold Water Dispenser Faucet Kit User Manual

pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your Westbrass C0136-50 Contemporary Cold Water Dispenser Faucet Kit. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Kandungan Pakej

Sahkan bahawa semua komponen yang disenaraikan di bawah hadir sebelum memulakan pemasangan.

• 11" Contemporary 1-Lever Cold Water Dispenser Faucet
• F400 In-line Water Filter Unit
• F400R Replacement Cartridge (2-Pack)
• 3-1/2" Post Style Kitchen Sink Basket Strainer
• 3-1/2" ISE Style Kitchen Sink Waste Disposal Trim Set
• All necessary mounting materials

Image: All components included in the Westbrass C0136-50 kit, featuring the white faucet, two filter cartridges, the filter housing, a sink basket strainer, and a disposal trim.

Arahan Pemasangan

Follow these steps carefully for proper installation of your cold water dispenser faucet kit.

1. Remove the compression nut, ferrule, locknut, friction washer, and base washer from the faucet.
2. Seat O-ring in base groove. If desired, a thin bead of silicone sealant can be applied to the O-ring for added sealing power. Do not use Plumber's Putty.
3. Center the faucet in the mounting hole and fasten with base washer, friction ring, and mounting nut. Do not overtighten.
4. Slide the 1/4" compression nut and ferrule over the supply tubing, insert the tube into the mounting nipple, and tighten the compression nut on the mounting nipple. Do not overtighten.
5. Fully open the handle on the pure water faucet and then turn on the water supply. Allow the water to run to rinse any debris from the system.
6. Check for leaks, especially at the water supply attachments.

Image: Detailed diagrams for faucet models D2033 and D2036, showing dimensions and component assembly for installation.

Water Filter Unit Installation

The F400 in-line filter unit should be installed between your water supply and the dispenser faucet.

• Securely fix the filter housing onto the cabinet wall using the screw-mounted headworks.
• Use the 3/8" insert fittings for copper or rigid plastic tubing.
• Ensure proper connection to prevent leaks, utilizing the triple seals in the polypropylene housing.

Image: Technical drawing of the F400 carbon block filter unit, showing assembled unit dimensions and individual components including the filter cartridge.

Arahan Operasi

Your Westbrass cold water dispenser faucet provides filtered water on demand.

• To dispense cold filtered water, simply move the single lever handle to the open position.
• The F400 in-line filter unit uses a carbon block medium to improve the taste of your tap water.
• The faucet features a 1/4-turn ceramic disc cartridge for smooth operation.

Penyelenggaraan

Penggantian Penapis

For optimal filtration results, the F400R filter cartridge should be replaced every 3 to 6 months or after 528 gallons (2000 liters) of use.

1. Switch off the water supply to the filter unit.
2. Place a small bowl under the filter housing sump to catch any residual water.
3. Turn the filter house nut clockwise a quarter turn to allow the filter housing sump to drop down from the filter housing head.
4. Once the sump is removed, unscrew the filter housing nut from the sump and tip any water out of the sump into the bowl or sink.
5. Remove the old filter by pulling the filter downward from the sump.
6. Dispose of the old filter in normal household waste.
7. Fit the new filter into the filter housing sump. Ensure not to disturb any seals and make sure they are in place before the next step.
8. Reassemble the filter housing and turn on the water supply, checking for leaks.

Image: Diagram illustrating the steps for replacing the filter cartridge in the filter housing, showing disassembly and reassembly.

Arahan Pembersihan

To maintain the finish of your Westbrass product:

• Do not use cleaners containing harsh chemicals, abrasives, or acids (e.g., ammonia, bleach, grease-cutters, or other strong detergents). These can damage the protective coating and the finish itself.
• Use only plain warm water and a mild soap on a soft cloth or sponge.
• Avoid using a sponge with a scouring pad.
• Do not rub hard to remove spots.

Image: The F400 anti-scale water filter unit shown alongside a replacement filter cartridge.

Spesifikasi

Menyelesaikan masalah

If you encounter any issues with your Westbrass C0136-50 kit, consider the following common solutions:

• Aliran Air Rendah: Check if the water supply valve is fully open. If the filter has been in use for an extended period, it may be clogged and require replacement.
• Kebocoran: Ensure all connections are securely tightened. Do not overtighten. Check O-rings and seals for proper seating and damage.
• Poor Water Taste: If the filtered water taste deteriorates, it is likely time to replace the filter cartridge.

For persistent problems or issues not covered here, please contact Westbrass customer support.

Sokongan Pelanggan

For further assistance, technical support, or warranty inquiries regarding your Westbrass product, please visit the official Westbrass webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.

Anda boleh mendapatkan maklumat hubungan dan sumber tambahan di Westbrass Storefront.