Okin 2-Pin Y Splitter Cable Power Cord Replacement (4.6ft & 0.66ft)

1. Produk Lebihview

The Okin 2-Pin Y Splitter Cable is designed to provide a multi-functional power solution for electric furniture. This cable allows a single power supply transformer to power two motors simultaneously, commonly found in electric recliners and lift chairs. It features a 2-pin hybrid plug (one round, one flat) for connection to the transformer and two 2-pin sockets with clips for motor attachment. This product is ideal for replacing damaged cords or expanding existing power systems.

Image 1: The Okin 2-Pin Y Splitter Cable, showing the main cable and two branch cables.

2. Maklumat Keselamatan

Always disconnect power from the main power supply before installing or removing the splitter cable.
Ensure all connections are secure and free from damage before restoring power.
Jangan dedahkan kabel kepada air atau kelembapan berlebihan.
Avoid placing heavy objects on the cable or bending it sharply, as this can cause damage.
If the cable appears damaged, discontinue use immediately and replace it.

3. Kandungan Pakej

1 x Okin 2-Pin Y Splitter Cable Power Cord (Main cable: 4.6 ft, Branch cables: 55 inches and 8 inches)

Note: Motor and transformer are not included.

4. Persediaan dan Pemasangan

Follow these steps to correctly install your Okin Y Splitter Cable:

Putuskan Kuasa: Ensure the electric recliner or lift chair is unplugged from the wall outlet to prevent electrical hazards.
Kenalpasti Sambungan: Locate the power supply transformer and the motor connection ports on your electric furniture.
Sambung ke Transformer: Take the 2-pin hybrid plug (one round, one flat) of the Okin Y splitter cable and securely connect it to the output port of your power supply transformer.
Connect to Motors: Attach each of the two 2-pin sockets with clips from the Y splitter cable to the corresponding input ports on your recliner motors. Ensure the clips are fully engaged for a secure connection.
Susun Kabel: Route the cables neatly to avoid pinching or tripping hazards.
Pulihkan Kuasa: Once all connections are secure, plug the electric recliner or lift chair back into the wall outlet.

Diagram showing Okin Y Splitter Cable connections to transformer and motors

Image 2: Connection diagram illustrating how to connect the Y splitter cable to a power supply transformer and two recliner motors.

5. Arahan Operasi

Once the Okin Y Splitter Cable is correctly installed, the operation of your electric recliner or lift chair remains unchanged. Use the existing controls (hand remote or integrated buttons) of your furniture to operate the motors as usual. The splitter cable simply facilitates power distribution from a single source to two motors.

6. Penyelenggaraan

Pembersihan: Wipe the cable with a dry, soft cloth. Do not use liquid cleaners.
Pemeriksaan: Periodically inspect the cable for any signs of wear, cuts, or damage to the insulation or connectors.
Storan: If storing the cable, coil it loosely. Avoid tight coiling or kinking, which can damage the internal wires.
Persekitaran: Keep the cable away from extreme temperatures, direct sunlight, and areas where it might be chewed by pets or damaged by furniture movement.

7. Penyelesaian masalah

Masalah	Kemungkinan Punca	Penyelesaian
No power to either motor.	Main power supply unplugged. Faulty power supply transformer. Y splitter cable not securely connected to transformer. Damaged Y splitter cable.	Check wall outlet and main power cord. Test transformer with a single motor if possible, or replace. Ensure the 2-pin hybrid plug is fully inserted into the transformer. Inspect cable for visible damage; replace if necessary.
Only one motor receives power.	Loose connection to the non-working motor. Motor rosak. Damage to one branch of the Y splitter cable.	Check the 2-pin socket connection to the non-working motor. Test the motor directly if possible, or swap connections to isolate the issue. Inspect the specific branch cable for damage; replace the Y splitter if damaged.

8. Spesifikasi

Nombor Model: R5.216.01.024D
Main Cable Length: 1.4 meter (4.6 kaki)
Branch Cable Lengths: 140 cm (55 inci) dan 20 cm (8 inci)
Connector Type (Input): 2-pin hybrid plug (one round, one flat)
Connector Type (Output): Two 2-pin sockets with clips
Bahan: High-quality pure copper core
Berat Barang: Kira-kira 2.89 auns
Dimensi Pakej: 8.7 x 6.34 x 1.14 inci

9. Keserasian

This Okin 2-Pin Y Splitter Cable is compatible with a wide range of electric recliners and lift chairs that utilize a 2-pin hybrid connection for their power supply and motors. Known compatible brands include:

Okin
Dewert
Lazyboy
Kebanggaan
Catnapper
limos

Always verify the plug design of your existing components to ensure compatibility before purchase.

10. Waranti dan Sokongan

For any questions, concerns, or support regarding your Okin 2-Pin Y Splitter Cable, please contact Okin customer service. Refer to your product packaging or the Okin official webtapak untuk maklumat hubungan terkini dan butiran jaminan.

	Arahan Pemasangan untuk Kerusi Malas Angkat Kuasa YB2213 Panduan pemasangan langkah demi langkah untuk kerusi malas lif kuasa YB2213, termasuk kandungan pakej, langkah sambungan dan arahan pendawaian untuk kuasa dan alat kawalan jauh. Menampilkan fungsi haba dan urutan.
	Panduan Penggantian Alat Kawalan Jauh OKIN HSW306 5-Pin ke 7-Pin Arahan langkah demi langkah untuk menggantikan alat kawalan jauh kerusi malas 5-pin OKIN HSW306 dengan model 7-pin, termasuk pintasan pendawaian, langkah pemasangan dan aksesori yang disyorkan.
	Panduan Penyelesaian Masalah Sistem Okin: Pembaikan dan Penyelenggaraan Kerusi Lif Panduan penyelesaian masalah yang komprehensif untuk Sistem Okin yang digunakan dalam kerusi lif. Belajar untuk mendiagnosis dan menyelesaikan isu biasa dengan kawalan tangan, transformer, motor dan kacang gelendong. Termasuk petua pemasangan.
	Manual Pengguna Sistem Kawalan Jauh OKIN RF.31.24.01 Manual pengguna yang komprehensif untuk sistem kawalan jauh 22 kekunci OKIN RF.31.24.01, memperincikan fungsi butang, prosedur tetapan kedudukan dan komponen sistem untuk katil boleh laras.
	Arahan Fungsi Kotak Kawalan OKIN CB3433A dan Panduan Operasi This document provides a detailed function instruction for the OKIN CB3433A control box, a component for adjustable furniture systems manufactured by OKIN, a Phoenix Mecano Company. It outlines the electrical configuration, describes the control box interface, and explains the operation of various actuators (head, foot, lumbar), massage motors, and underbed RGB lighting. The guide also covers LED indicators, pairing procedures, connectivity options (SYNC, USB, UART), power requirements, and includes FCC and ISED RSS regulatory warnings. Written by Jarek from the R&D Division.
	Sistem Dua Lajur OKIN S2-2#: Manual Arahan & Panduan Operasi Panduan komprehensif untuk Sistem Dwi Kolum OKIN S2-2#. Ketahui cara mengendalikan, menetapkan had, menyelesaikan masalah ralat dan memahami spesifikasi teknikal untuk meja boleh laras ketinggian anda.

Okin R5.216.01.024D