1. Pengenalan
This manual provides essential information for the safe and efficient operation of your VOLTCRAFT ESP-3010 Laboratory Power Supply. The ESP-3010 is a high-precision, adjustable DC power supply designed for various electronic applications, offering stable output voltage from 0 to 30V and current from 0 to 10A, with a maximum power output of 300W. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage or injury.
Rajah 1: Depan view of the VOLTCRAFT ESP-3010 Laboratory Power Supply.
2. Arahan Keselamatan
Always adhere to the following safety precautions to prevent electric shock, fire, or damage to the device:
- Ensure the power supply is connected to a grounded outlet with the correct voltage (AC 230V).
- Jangan kendalikan peranti dalam keadaan basah atau damp syarat.
- Jangan buka casing; tiada bahagian yang boleh diservis oleh pengguna di dalamnya. Rujuk semua servis kepada kakitangan yang berkelayakan.
- Elakkan litar pintas terminal output.
- Ensure proper ventilation; do not block the ventilation openings.
- Disconnect the power cord before cleaning or moving the unit.
- Use only the specified fuse type (F5A250VAC).
3. Produk Lebihview
3.1 Panel Depan
Rajah 2: Terperinci view daripada panel hadapan.
- Paparan Digital: Menunjukkan volum output masa nyatatage (V) dan arus (A).
- Voltage Adjustment Knobs (VOLT):
- kasar: For large adjustments of output voltage.
- Baik: For precise adjustments of output voltage.
- Current Adjustment Knobs (CURR):
- kasar: For large adjustments of output current limit.
- Baik: For precise adjustments of output current limit.
- C.V. (Constant Voltage) Penunjuk: Illuminates when the unit is operating in constant voltagmod e.
- C.C. (Constant Current) Indicator: Illuminates when the unit is operating in constant current mode.
- Suis kuasa: Toggles the unit on/off.
- Terminal Keluaran: Standard 4mm banana plug sockets for positive (red), negative (black), and ground (green/yellow) connections.
3.2 Panel Belakang
Rajah 3: Terperinci view of the rear panel.
- Kipas Penyejuk: Provides necessary airflow to dissipate heat.
- Input Kuasa AC: IEC C14 connector for the power cord.
- Pemegang fius: Contains the main protective fuse (F5A250VAC).
4. Persediaan
- Membongkar: Carefully remove the power supply from its packaging. Inspect for any signs of damage during transit. Retain the packaging for future transport or storage.
- penempatan: Place the unit on a stable, level surface. Ensure there is adequate space around the unit (at least 10 cm on all sides) for proper ventilation, especially around the rear cooling fan. Avoid placing it near heat sources or in direct sunlight.
- Sambungan Kuasa: Connect the supplied AC power cord to the AC power input on the rear panel of the power supply and then to a grounded AC 230V wall outlet.
- Semakan Awal: Before connecting any load, turn on the power supply using the front panel power switch. The digital display should illuminate, showing voltage dan bacaan semasa.
5. Arahan Operasi
5.1 Menghidupkan dan Mematikan
- To turn on, press the power switch on the front panel to the 'ON' (I) position.
- To turn off, press the power switch to the 'OFF' (O) position.
5.2 Adjusting Voltage dan Semasa
- Tetapan Voltage: Rotate the 'VOLT Coarse' knob to set the approximate desired voltage. Use the 'VOLT Fine' knob for precise adjustments. Observe the voltage reading on the digital display.
- Menetapkan Had Semasa: Rotate the 'CURR Coarse' knob to set the approximate maximum current limit. Use the 'CURR Fine' knob for precise adjustments. This setting determines the maximum current the power supply will deliver before switching to Constant Current (C.C.) mode.
- Understanding CV/CC Modes:
- Pemalar Voltage (C.V.): When the load resistance is high enough that the current drawn is less than the set current limit, the power supply operates in C.V. mode, maintaining the set voltage. The C.V. indicator will be lit.
- Constant Current (C.C.): When the load resistance is low, causing the current drawn to reach the set current limit, the power supply switches to C.C. mode. The output voltage will drop to maintain the set current. The C.C. indicator will be lit.
5.3 Connecting a Load
- Ensure the power supply is turned off before connecting any load.
- Connect the positive (+) terminal of your load to the red output terminal of the power supply.
- Connect the negative (-) terminal of your load to the black output terminal of the power supply.
- If your load requires grounding, connect its ground terminal to the green/yellow output terminal of the power supply.
- After connecting the load, turn on the power supply. Adjust voltage and current as required for your application.
6. Penyelenggaraan
- Pembersihan: Putuskan sambungan bekalan kuasa daripada sesalur kuasa sebelum membersihkan. Gunakan kain lembut dan kering untuk mengelap bahagian luar. Jangan gunakan pembersih atau pelarut yang kasar.
- Pengudaraan: Regularly check that the ventilation openings and cooling fan are free from dust and debris. Use compressed air to clear any blockages if necessary.
- Penggantian fius: If the unit fails to power on, the fuse may need replacement. Disconnect the power cord, locate the fuse holder on the rear panel, and replace the fuse with one of the identical type and rating (F5A250VAC).
- Storan: Apabila tidak digunakan untuk tempoh yang lama, simpan bekalan kuasa di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Unit tidak dihidupkan. | No power from outlet; Power cord loose; Blown fuse. | Check wall outlet; Ensure power cord is securely connected; Replace fuse (F5A250VAC). |
| Tiada keluaran voltage / semasa. | Terminal output tidak disambungkan; Voltage/current knobs set to zero; Unit in C.C. mode with low current limit. | Verify load connections; Adjust voltage and current knobs; Increase current limit or check load resistance. |
| Unit switches to C.C. mode unexpectedly. | Load drawing more current than set limit; Short circuit in load. | Increase current limit; Check load for short circuits or excessive current draw. |
| Terlalu panas. | Blocked ventilation; Excessive load. | Ensure clear airflow around the unit; Reduce load or operating time. |
8. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nombor Model | VC-12840980 |
| Keluaran Voltage | 0 - 30 V/DC (Adjustable) |
| Arus Keluaran | 0 - 10 A (Adjustable) |
| Kuasa Keluaran | 300 W |
| Input Voltage | AC 230V |
| Jenis Fius | F5A250VAC |
| Dimensi Produk (L x W x H) | 8.9 x 3.23 x 5.43 inci (22.6 x 8.2 x 13.8 cm) |
| Berat Barang | 0.064 ounces (1.8 grams) - Note: This weight appears to be incorrect in source data, typical weight for such device is much higher. |
| Pengeluar | KERA VOLTCRAFT |
9. Waranti dan Sokongan
VOLTCRAFT products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Voltcraft webtapak. Simpan resit pembelian anda sebagai bukti pembelian.
For further assistance, you may contact Voltcraft customer support through their official channels. Please have your model number (VC-12840980) and serial number (if applicable) ready when contacting support.
