Turing TP-MFD8M28-1Y Smart Series 8MP Network Dome Camera User Manual

1. Pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Turing TP-MFD8M28-1Y Smart Series 8MP Network Dome Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation.

The TP-MFD8M28-1Y is an advanced 8MP dome IP camera designed for robust surveillance applications, featuring Turing Vision Core AI Licensing Plan for enhanced cloud-based functionalities.

2. Maklumat Keselamatan

Patuhi langkah keselamatan berikut untuk mengelakkan kecederaan atau kerosakan pada produk:

• Ensure the power source is stable and meets the camera's requirements (PoE).
• Jangan dedahkan kamera kepada suhu, kelembapan atau persekitaran yang menghakis yang melampau.
• Avoid direct exposure of the lens to strong light sources, which may damage the image sensor.
• Handle the camera with care to prevent physical damage, especially to the dome cover.
• Pemasangan hendaklah dilakukan oleh kakitangan yang berkelayakan mengikut kod elektrik tempatan.
• Putuskan sambungan kuasa sebelum melakukan sebarang penyelenggaraan atau pembersihan.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• Turing TP-MFD8M28-1Y Dome Camera
• Skru Pemasangan dan Palam Dinding
• Templat Pemasangan
• Quick Start Guide (This manual serves as the comprehensive guide)
• Waterproof Connector (if applicable)

4. Ciri-ciri Produk

The Turing TP-MFD8M28-1Y camera offers a range of advanced features:

• Resolusi Tinggi: Max. 8MP (3840x2160) @20 FPS for clear imaging.
• Kanta Tetap: Equipped with a 2.8mm fixed lens.
• Prestasi Cahaya Rendah: Features TwilightVision superior low light technology and Smart IR up to 30m (98ft).
• Ketahanan: IP67 rated for dust and water resistance, and IK10 rated for vandal resistance.
• Integrasi AI: Includes 1st Year Turing CORE AI License for cloud event video clip storage and smart searches.
• Pematuhan: NDAA Compliant.
• Storan: Supports up to 256GB microSD card (card not included).

Rajah 4.1: Depan view of the Turing TP-MFD8M28-1Y Smart Series 8MP Network Dome Camera. The camera features a white, circular housing with the "TURING" logo on the side. The lower part consists of a dark, transparent dome protecting the camera lens, which is visible at the bottom center. A small black dot, likely an indicator light or sensor, is present on the top surface of the white housing.

5. Persediaan dan Pemasangan

5.1 Pemilihan Lokasi Pemasangan

Pilih lokasi pemasangan yang menyediakan medan yang dikehendaki view and is structurally sound enough to support the camera's weight. Consider factors such as lighting conditions, potential obstructions, and network cable accessibility. The camera is designed for ceiling mount applications.

5.2 Pemasangan Fizikal

1. Sediakan Permukaan Pemasangan: Use the provided installation template to mark the drilling holes on the ceiling or wall.
2. Lubang gerudi: Drill pilot holes according to the marked positions. Insert wall plugs if mounting on drywall or masonry.
3. Kabel Laluan: Pass the Ethernet cable (for PoE) through the cable entry hole in the mounting base.
4. Selamatkan Kamera: Align the camera's mounting holes with the drilled holes and secure it using the provided screws. Ensure the camera is firmly attached.
5. Sambungkan Kabel Rangkaian: Connect the Ethernet cable to the camera's RJ45 port. Ensure a secure connection, especially if using the waterproof connector.
6. Laraskan View: Loosen the adjustment screws on the camera's gimbal (if applicable) to position the lens for the desired viewing angle. Tighten the screws once adjusted.

5.3 Konfigurasi Rangkaian

After physical installation, connect the camera to your network. The camera supports Power over Ethernet (PoE), simplifying installation by providing both power and data through a single Ethernet cable.

• Tugasan Alamat IP: The camera will typically obtain an IP address automatically via DHCP. Refer to your network's DHCP server or use Turing's discovery tool (if available) to find the camera's IP address.
• Mengakses Kamera: Buka a web pelayar dan masukkan alamat IP kamera untuk mengaksesnya web antara muka.
• Log Masuk Awal: Use the default username and password (refer to the Quick Start Guide or product packaging for defaults). It is highly recommended to change the default password immediately for security.
• Tetapan Rangkaian: Configure network settings such as static IP address (if preferred), subnet mask, gateway, and DNS servers as per your network requirements.

6. Operasi

6.1 Langsung View dan Rakaman

Akses siaran langsung kamera view through its web interface or a compatible Network Video Recorder (NVR) / Video Management Software (VMS). Configure recording schedules, motion detection, and other recording parameters as needed.

• Resolusi dan Kadar Bingkai: Adjust video resolution (up to 8MP) and frame rate (up to 20 FPS) based on your storage and bandwidth capabilities.
• Tetapan Imej: Fine-tune brightness, contrast, saturation, and other image parameters for optimal video quality. Utilize WDR (Wide Dynamic Range) for scenes with high contrast.

6.2 Smart Features (Turing CORE AI)

The camera integrates with Turing Vision Core AI, offering advanced surveillance capabilities:

• Cloud Event Video Storage: Benefit from 30-day cloud event video clip storage with the CORE AI License.
• Smart Searches: Utilize intelligent search functionalities in the cloud to quickly find specific events or patterns.
• Makluman Pintar: Configure real-time alerts based on detected events.

For detailed configuration of Turing Vision Core AI features, refer to the Turing Vision platform documentation or support resources.

6.3 Storan Kad MikroSD

The camera supports local storage via a microSD card up to 256GB. Insert the card into the designated slot (usually accessible by removing the dome cover). Format the card through the camera's web antara muka sebelum digunakan.

7. Penyelenggaraan

Penyelenggaraan berkala memastikan prestasi optimum dan jangka hayat kamera anda:

• Pembersihan: Gently clean the dome cover and lens with a soft, lint-free cloth. For stubborn dirt, use a mild, non-abrasive cleaning solution. Do not use harsh chemicals.
• Kemas kini Firmware: Periodically check the Turing website for firmware updates. Keeping the firmware updated ensures access to the latest features and security patches.
• Pemeriksaan Kabel: Inspect network cables and connections for any signs of wear or damage, especially in outdoor installations.
• Pemeriksaan Alam Sekitar: Pastikan persekitaran operasi kamera kekal dalam julat suhu dan kelembapan yang ditetapkan.

8. Penyelesaian masalah

9. Spesifikasi

10. Waranti dan Sokongan

The Turing TP-MFD8M28-1Y camera includes an extended warranty with an active CORE AI License. For specific warranty terms and conditions, please refer to the official Turing webtapak atau hubungi sokongan pelanggan mereka.

For technical support, product inquiries, or warranty claims, please visit the official Turing support portal or contact their customer service department. Keep your purchase receipt and product serial number handy when seeking support.

Official Turing Webtapak: www.turing.ai