1. Pengenalan
This manual provides detailed instructions for the installation and use of the AKASO Action Camera Motorcycle Kit. This kit is designed to securely mount your action camera to various surfaces on your motorcycle or helmet, enabling you to capture dynamic footage during your rides. It is compatible with a wide range of action cameras, including AKASO EK7000/EK7000 Pro/Brave 4/Brave 4 Pro/Brave 7 LE/Brave 7/Brave 8/V50X/V50 Pro/V50 Elite, GoPro Hero 12/11/10/9/8, DJI, and Apexcam models.

Imej 1: Selesaiview of the AKASO Action Camera Motorcycle Kit components.
2. Kandungan Pakej
Sila sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:
- Adjustable Handlebar Bracket x1
- Lekap rata x2
- Long Thumb Screw x4
- Flat Double-Sided Adhesive Tape x2
- Lekap Gesper x2
- E Lekapkan x2
- A Gunung x1
- Gimbal Handlebar Bracket x1
- Extension Stick x1

Imej 2: Terperinci view of the kit's components, including various mounts, screws, and adhesive pads.
3. Persediaan & Pemasangan
3.1 Pemasangan Hendal
To mount your action camera on a motorcycle, bike, or e-bike handlebar:
- Attach the Gimbal Handlebar Bracket to the Adjustable Handlebar Bracket.
- Securely fasten the Adjustable Handlebar Bracket to your desired handlebar location. Ensure a tight fit to prevent movement during operation.
- Mount your action camera onto the Gimbal Handlebar Bracket using a Long Thumb Screw.
- Adjust the camera angle using the 360-degree rotation and 180-degree vertical adjustment features of the bracket for optimal recording.

Image 3: Action camera mounted on a motorcycle handlebar, capturing the road ahead.
3.2 Helmet Mounting
To mount your action camera on a helmet:
- Clean the helmet surface thoroughly where the mount will be placed.
- Attach a Flat Mount to the helmet using a Flat Double-Sided Adhesive Tape. Press firmly for secure adhesion.
- Connect a Buckle Mount to the Flat Mount.
- For extended reach, attach the Extension Stick to the Buckle Mount.
- Mount your action camera to the Extension Stick or directly to the Buckle Mount using a Long Thumb Screw.

Image 4: Illustration of helmet mounting options, including direct mount and extended mount.
3.3 Pelarasan
The mounting system allows for flexible positioning:
- Putaran 360 Darjah: The handlebar bracket features a ball joint for full horizontal rotation.
- 180-Degree Vertical Adjustment: The various joints and the extension stick allow for significant vertical angle adjustments.

Image 5: Visual representation of the adjustable angles for camera positioning.
4. Arahan Operasi
This kit provides mounting solutions for your action camera. The operation of the action camera itself (e.g., recording, changing modes, battery management) is dependent on the specific camera model you are using. Please refer to your action camera's instruction manual for detailed operating procedures.
Ensure all mounting points are tightened before beginning your activity to prevent the camera from dislodging.
5. Penyelenggaraan
To ensure the longevity and optimal performance of your AKASO Action Camera Motorcycle Kit:
- Pembersihan: Wipe down all components with a soft, damp cloth after use to remove dirt, dust, or debris. Avoid harsh chemicals.
- Storan: Store the kit in a dry, cool place away from direct sunlight when not in use.
- Pemeriksaan: Periodically inspect all screws, brackets, and adhesive tapes for wear or damage. Replace any worn components to maintain secure mounting.
6. Penyelesaian masalah
If you encounter issues with your mounting kit, consider the following:
- Camera Movement/Vibration: Ensure all thumb screws and bracket clamps are fully tightened. Check that the mounting surface is clean and flat for adhesive mounts.
- Adhesive Mount Not Sticking: Ensure the surface is clean, dry, and smooth before applying the adhesive tape. Apply firm pressure for at least 30 seconds and allow sufficient curing time (typically 24 hours) before use.
- Kesukaran Melaraskan Sudut: Loosen the relevant thumb screw or clamp slightly, adjust the angle, and then re-tighten firmly.
7. Spesifikasi
| Dimensi Pakej | 7.68 x 5.2 x 3.03 inci |
| Berat Barang | 1.01 paun |
| Pengeluar | AKASO |
| ASIN | B0BPM42LZ7 |
8. Waranti & Sokongan
For warranty information or technical support regarding your AKASO Action Camera Motorcycle Kit, please refer to the official AKASO weblaman web atau hubungi khidmat pelanggan mereka secara langsung. Butiran biasanya diberikan bersama pembungkusan produk anda atau pada halaman pengilang webtapak.





