Manual Arahan Rangka Katil Queen Yaheetech

pengenalan

Thank you for choosing the Yaheetech Queen Bed Frame. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Maklumat Keselamatan Penting

• Jangan melebihi kapasiti berat maksimum 800 lb.
• Berhati-hati dengan tepi tajam semasa pemasangan dan penggunaan.
• Always use with a suitable mattress and bedding.
• Ikut arahan pemasangan dengan teliti untuk mengelakkan ketidakstabilan atau keruntuhan.

Kandungan Pakej

Before starting assembly, ensure all parts are present and undamaged. Refer to the included installation manual for a detailed list of components and hardware. Typically, your package will include:

• Upholstered Headboard Sections
• Footboard Sections
• Rel Sisi
• Bilah Logam
• Center Support Legs and Rails
• Perkakasan Pemasangan (skru, pencuci, sepana Allen)

Image: All components of the Yaheetech Queen Bed Frame laid out for assembly, including headboard, footboard, side rails, slats, and hardware.

Persediaan dan Perhimpunan

Assembly is designed to be straightforward. It is recommended to have a second person assist with certain steps for ease and safety. An Allen wrench is provided for all necessary fastenings.

Langkah 1: Pasang Kepala Papan dan Papan Kaki

Connect the upholstered headboard and footboard sections to their respective metal frames using the provided screws and Allen wrench. Ensure all connections are secure but do not overtighten until the entire frame is assembled.

Image: Close-up of the curved upholstered headboard, showing the fabric and metal frame connection points.

Step 2: Attach Side Rails and Center Supports

Connect the side rails to the assembled headboard and footboard. Install the center support rails and legs. These metal components provide crucial stability and support for your mattress.

Imej: Terperinci view highlighting the durable metal slats and strong rounded legs, ensuring high load-bearing capacity.

Langkah 3: Pasang Bilah Logam

Place the metal slats across the frame. These slats are designed to fit snugly and provide direct support for your mattress, eliminating the need for a box spring. Ensure each slat is properly seated.

Image: Diagram illustrating the fully assembled metal frame with slats, ready for mattress placement.

Video Perhimpunan

Arahan Operasi

Once assembled, your Yaheetech Queen Bed Frame is ready for use. Place your queen-sized mattress directly onto the metal slats. The embedded design of the frame helps prevent the mattress from sliding.

• Tiada Spring Kotak Diperlukan: The robust 12-slat support system is designed to support your mattress directly, eliminating the need for a box spring.
• Kestabilan Tilam: The three padded sides of the bed frame are intentionally higher than the inserted slats to minimize mattress movement.
• Storan Bawah Katil: Pelepasan tanah 8.7 inci menyediakan ample space for storage bins or allows for easy cleaning with a vacuum robot.

Image: Diagram showing the recommended mattress height of 10 inches and how the embedded design prevents mattress sliding.

Penyelenggaraan

Untuk memastikan jangka hayat dan penampilan rangka katil anda, ikuti garis panduan penyelenggaraan ini:

• Membersihkan Bingkai: Lap bahagian logam dengan kain lembut,amp cloth. Avoid harsh chemicals that may damage the powder-coated finish.
• Membersihkan Upholsteri: For the dark grey velvet upholstery, spot clean with a mild detergent and a damp cloth. Blot dry and avoid excessive moisture.
• Pemeriksaan biasa: Periodically check all screws and bolts to ensure they remain tight. Retighten as necessary to maintain stability and prevent noise.
• Pengudaraan: Ensure adequate air circulation around and under the mattress to prevent moisture buildup.

Menyelesaikan masalah

Jika anda menghadapi sebarang masalah dengan rangka katil anda, rujuk kepada penyelesaian biasa berikut:

• Bunyi Berdecit: Check all connection points and tighten any loose screws. Ensure the mattress is properly seated on the slats.
• Ketidakstabilan: Verify that all parts are correctly assembled according to the instructions and that all bolts are securely tightened. Ensure the bed frame is on a flat, level surface.
• Tilam Gelongsor: The embedded design is intended to prevent sliding. If your mattress still slides, ensure it is the correct size for the frame and consider using a non-slip mattress pad.

Spesifikasi

Image: Visual representation of the bed frame's dimensions, materials, and maximum weight capacity.

Waranti dan Sokongan

For warranty information, customer support, or to purchase replacement parts, please visit the official Yaheetech store or contact their customer service directly. Details can typically be found on the product packaging or the brand's official webtapak.