BirdDog OG4

Manual Pengguna Kad openGear Pengekod/Penyahkod NDI 4-Saluran BirdDog OG4

Model: OG4

1. Pengenalan

The BirdDog OG4 is the world's first NDI openGear card, designed for professional video workflows. This powerful encoder/decoder features four independently configurable 12G SDI inputs and outputs, providing versatile connectivity for various broadcast and production environments. It includes full Dashboard support for intuitive control and an SFP+ port for high-speed 10GbE network connectivity, ensuring robust and efficient NDI signal transmission.

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your BirdDog OG4 unit. Please read this manual thoroughly before operating the device to ensure proper functionality and to prevent damage.

2. Produk Lebihview

The BirdDog OG4 is an advanced openGear card that integrates seamlessly into existing openGear frames. Its primary function is to convert SDI video signals to NDI and vice-versa, facilitating high-quality, low-latency video over IP networks.

BirdDog OG4 openGear card with 10GbE option

Rajah 2.1: Depan view of the BirdDog OG4 openGear card, highlighting the 10GbE SFP+ port and SDI connectors. This image shows the card's primary interface for network and video connections.

BirdDog OG4 card removed from frame

Figure 2.2: The BirdDog OG4 card partially removed from an openGear frame, illustrating its modular design and ease of installation or removal.

BirdDog OG4 cards installed in an openGear frame

Figure 2.3: Multiple BirdDog OG4 cards installed side-by-side within an openGear frame, demonstrating a high-density NDI conversion solution.

3. Spesifikasi

Table 3.1: BirdDog OG4 Technical Specifications
CiriPerincian
Nombor ModelOG4
Input/Output4x 12G SDI (Independently Configurable)
Kesambungan RangkaianSFP+ Port for 10GbE
NDI SupportFull NDI Encoder/Decoder
Antara Muka KawalanopenGear Dashboard
Faktor BentukKad openGear
Berat Barang3 paun
Pertama Tersedia1 November 2022

4. Persediaan dan Pemasangan

4.1 Membongkar

Carefully remove the BirdDog OG4 card from its packaging. Inspect the card for any signs of physical damage. Retain the original packaging for future transport or storage.

4.2 openGear Frame Installation

  1. Ensure your openGear frame is powered off before installing any cards.
  2. Locate an available slot in your openGear frame.
  3. Gently slide the BirdDog OG4 card into the slot until it is fully seated. Ensure the card's edge connector aligns correctly with the frame's backplane connector.
  4. Secure the card using the retaining mechanism provided by your openGear frame (e.g., screws or latches).
Installing BirdDog OG4 card into openGear frame

Figure 4.1: A BirdDog OG4 card being inserted into an openGear frame slot, demonstrating the correct installation procedure.

4.3 Sambungan Kabel

Close-up of BirdDog OG4 SDI and SFP+ ports

Rajah 4.2: Satu terperinci view of the BirdDog OG4's SDI and SFP+ ports, showing the connection points for video and high-speed network cables.

5. Operasi

5.1 Menghidupkan

Once all connections are secure, power on your openGear frame. The BirdDog OG4 card will initialize. Observe the status indicators on the card for proper boot-up.

5.2 Accessing the Dashboard

The BirdDog OG4 is managed via the openGear Dashboard software. This software allows for comprehensive configuration and monitoring of the card's NDI encoding/decoding functions, SDI settings, and network parameters.

  1. Ensure your computer is on the same network as the openGear frame.
  2. Launch the openGear Dashboard software.
  3. The OG4 card should appear in the device list. Select the card to access its configuration interface.

5.3 NDI Configuration

Within the Dashboard, you can configure each of the four SDI channels independently:

For detailed NDI settings and advanced features, consult the openGear Dashboard user guide or BirdDog's official documentation.

6. Penyelenggaraan

6.1 Pembersihan

The BirdDog OG4 card requires minimal maintenance. Periodically, ensure the openGear frame and the card's exposed surfaces are free from dust and debris. Use a soft, dry, lint-free cloth for cleaning. Do not use liquid cleaners or solvents.

6.2 Kemas Kini Perisian Tegar

BirdDog may release firmware updates to improve performance, add features, or address issues. It is recommended to regularly check the BirdDog website for the latest firmware. Firmware updates are typically performed through the openGear Dashboard software. Follow the instructions provided with the firmware update package carefully.

Close-up of BirdDog OG4 circuit board

Rajah 6.1: Gambar jarak dekat view of the BirdDog OG4's circuit board, illustrating the intricate electronic components that require a dust-free environment for optimal performance.

7. Penyelesaian masalah

This section provides solutions to common issues you might encounter with your BirdDog OG4 card.

Jadual 7.1: Langkah Penyelesaian Masalah Lazim
MasalahKemungkinan PuncaPenyelesaian
Card not detected in DashboardImproper installation, power issue, network issue.
  • Ensure the card is fully seated in the openGear frame slot.
  • Verify the openGear frame is powered on.
  • Check network connectivity between your computer and the openGear frame.
  • Restart the openGear frame.
No NDI signal output/inputIncorrect NDI configuration, network issues, SDI signal issues.
  • Verify NDI encoder/decoder settings in the Dashboard.
  • Ensure the SFP+ module is correctly installed and the 10GbE network link is active.
  • Check SDI cable connections and ensure the SDI source/destination is active and providing a valid signal.
  • Confirm NDI sources are discoverable on the network.
Video quality issues (artifacts, dropped frames)Network congestion, incorrect bandwidth settings, faulty cables.
  • Ensure your 10GbE network is not overloaded.
  • Adjust NDI bandwidth settings in the Dashboard to a lower value if necessary.
  • Inspect SDI and Ethernet cables for damage.
  • Ensure the openGear frame has adequate cooling.

If you continue to experience issues, please refer to the support section or contact BirdDog technical support.

8. Waranti dan Sokongan

8.1 Maklumat Waranti

BirdDog products typically come with a limited manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your product or visit the official BirdDog webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.

8.2 Sokongan Teknikal

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact BirdDog technical support. Before contacting support, have your product model number (OG4) and serial number ready. You can find contact information and additional resources on the official BirdDog webtapak:

Dokumen Berkaitan - OG4

Praview BirdDog RESTful API v1.0 Dokumentasi
Dokumentasi untuk BirdDog RESTful API v1.0, menggariskan arahan untuk mengautomasikan dan mengawal skrip peranti perkakasan BirdDog. Meliputi tetapan pengekodan, tetapan nyahkod, tetapan AV, senarai sumber NDI, pratetap kamera dan pelarasan imej.
Praview Panduan Pengguna BirdDog Wallplate: Penghantaran Video NDI dan AV melalui IP
Panduan pengguna yang komprehensif untuk BirdDog Wallplate, memperincikan ciri, pemasangan, konfigurasi dan operasinya untuk penghantaran video NDI dan penyelesaian AV melalui IP. Meliputi model Wallplate IN dan OUT, web UI, tetapan rangkaian dan glosari.
Praview Nota Keluaran Perisian Tegar BirdDog A300 GEN 2
Nota keluaran untuk perisian tegar BirdDog A300 GEN 2, memperincikan ciri baharu, pembetulan pepijat dan pengehadan yang diketahui untuk pelbagai versi perisian tegar termasuk 4.5.3418-LTS, 4.5.3414-LTS, 21.08.3401 dan 3.0.
Praview Panduan Pengguna Jambatan BirdDog Dante NDI
Panduan pengguna untuk Jambatan NDI BirdDog Dante, memperincikan persediaan dan operasinya untuk menukar audio Dante kepada NDI dan sebaliknya. Termasuk arahan tentang konfigurasi rangkaian, pemilihan saluran audio dan pemilihan sumber NDI.
Praview BirdDog Present for Zoom Installation and Operation Guide
A comprehensive guide to installing and operating BirdDog Present for Zoom, enabling professional multi-camera production within Zoom meetings. Learn setup, configuration, and advanced features for seamless video integration.
Praview Panduan Mula Pantas Kamera BirdDog Zoom Bilik Persediaan
Panduan permulaan pantas untuk menyediakan kamera BirdDog dengan Bilik Zoom menggunakan teknologi NDI. Ketahui cara mengkonfigurasi tetapan Bilik Zoom, pilih sumber kamera NDI anda dan kawal kamera anda dari jauh.