1. Pengenalan
The Artograph LED Tracer Opaque Art Projector is designed to assist artists and crafters in enlarging and tracing images. This portable device allows you to project flat artwork from 2 times up to 14 times its original size onto a vertical surface such as a wall or easel. It is suitable for various applications including sketching, outlining, creating murals, and transferring patterns.
This manual provides essential information for the safe and effective use of your LED Tracer projector. Please read it thoroughly before operation.
Figure 1: Artograph LED Tracer Opaque Art Projector, front-side view.
2. Maklumat Keselamatan
- Bekalan Kuasa: Use only the provided low voltage power adapter (12V, 1.5 AMP) and 6.5-foot long cord. Ensure the power outlet is easily accessible and properly grounded.
- Pengudaraan: Do not block the ventilation openings on the projector. Adequate airflow is necessary to prevent overheating.
- haba: The projector's casing may become warm to the touch after extended use. This is normal. If it becomes excessively hot, discontinue use and allow it to cool down.
- penempatan: Letakkan projektor di atas permukaan yang stabil dan rata untuk mengelakkannya daripada jatuh.
- Kelembapan: Keep the projector away from water or other liquids. Do not operate in damp persekitaran.
- Kanak-kanak: This device is not a toy. Keep out of reach of small children.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej:
- Artograph LED Tracer Opaque Art Projector
- 6.5-foot long power cord with standard 120V grounded plug
- Volum rendahtage power adapter (12V, 1.5 AMP)
- Integrated 200mm optical glass lens
4. Persediaan
- Bongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
- Kedudukan Projektor: Place the LED Tracer on a stable, flat surface. Ensure there is enough space for your artwork underneath and a clear path for the projection onto your desired vertical surface (wall, easel, canvas).
- Sambungkan Kuasa: Sambung vol rendahtage power adapter to the projector's power input port. Plug the 6.5-foot power cord into a standard 120V grounded electrical outlet.
- Prepare Artwork: Place the artwork you wish to project directly underneath the projector's opening. The maximum copy size for the artwork is 5 inches by 5 inches.
Figure 2: Projector setup with artwork placed underneath.
5. Arahan Operasi
- Hidupkan kuasa: Press the power button, typically located on the top of the projector, to turn on the LED light source.
- Adjust Projection Distance: Move the projector closer to or further away from the vertical surface to adjust the size of the projected image. The projector can enlarge images from 2 times up to 14 times the original size.
- Focus Image: Rotate the lens barrel at the front of the projector to bring the projected image into sharp focus.
- Mengesan: Once the image is focused and at the desired size, you can begin tracing or outlining on your chosen surface.
Petua untuk Keputusan Terbaik:
- Persekitaran Gelap: For maximum visibility and clarity of the projected image, operate the projector in a dark room. Ambient light significantly impacts projection performance.
- Large Designs: When working with larger designs or prints, it is recommended to work in sections.
- Kontras Imej: Images with good contrast and clarity will project more effectively.
Figure 3: Easy operation steps: Place, Project, Trace.
Figure 4: Adjusting the focus lens for a clear projection.
6. Penyelenggaraan
- Membersihkan Lensa: Gunakan kain lembut dan bebas lin yang direka khusus untuk kanta optik untuk mengelap kanta projektor dengan perlahan. Elakkan bahan yang melelas atau bahan kimia yang keras.
- Membersihkan Casing: Lap bahagian luar projektor dengan kain lembut dan kering. Jangan gunakan pembersih cecair terus pada peranti.
- Storan: Apabila tidak digunakan, simpan projektor di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan habuk yang berlebihan.
- Jangka hayat LED: The integrated LED light source has a lifespan of up to 10,000 hours and does not require replacement.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada imej ditayangkan | Projector not powered on; Power cord not connected; Power outlet issue. | Ensure power button is pressed. Check power cord connections. Test outlet with another device. |
| Imej kabur | Lens out of focus; Projector too close/far from surface. | Rotate the lens barrel to adjust focus. Adjust the distance between the projector and the projection surface. |
| Projected image is dim | Too much ambient light; Low contrast artwork. | Operate in a darker room. Use artwork with higher contrast. |
| Projector feels hot | Extended use; Blocked ventilation. | Discontinue use and allow to cool. Ensure ventilation openings are clear. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | 25370 |
| Dimensi Produk | 12.75" L x 9" P x 9" T (32.39 sm x 22.86 sm x 22.86 sm) |
| Berat Barang | 3 paun (1.36 kg) |
| Lensa | 200 mm Optical Glass Lens |
| Sumber Cahaya | LED berintensiti tinggi |
| Kecerahan LED | 5,000 Lux |
| Jangka Hayat LED | Sehingga 10,000 Jam |
| Saiz Salin | 5" x 5" (12.7 cm x 12.7 cm) |
| Julat Unjuran | 2X to 14X Enlargement |
| Komponen yang Disertakan | Projector unit, 6.5-foot power cord, 12V 1.5 AMP penyesuai kuasa |
| Jenis Pemasangan | Lekap Meja |
Figure 5: Artograph LED Tracer specifications overview.
Figure 6: Artograph LED Tracer dimensions.
9. Waranti dan Sokongan
For information regarding warranty coverage, product support, or service, please refer to the official Artograph website or contact Artograph customer service directly. Contact details can typically be found on the manufacturer's packaging or webtapak.