Manual Pengguna Lampu Kilat Monolight Godox SK300IIV

1. Pengenalan

Terima kasih kerana membeliasing the Godox SK300IIV Monolight Flash. This professional studio flash is designed for high-quality photography, offering stable output, a wide range of power adjustments, and convenient operation. Please read this manual carefully before use to ensure proper operation and optimal performance.

2. Arahan Keselamatan

• Do not disassemble or modify the unit. If the product breaks down, send it to an authorized maintenance center.
• Pastikan produk ini kering. Jangan kendalikan dengan tangan basah atau rendam dalam air.
• Jauhkan daripada kanak-kanak.
• Do not use in the presence of flammable gases, chemicals, or other similar materials.
• Do not touch the flash tube or modeling lamp after use, as they may be hot.
• Sentiasa putuskan sambungan kord kuasa sebelum membersihkan atau melakukan penyelenggaraan.

3. Kandungan Pakej

• Studio Strobe Flash (SK300IIV)
• Pemantul Standard
• Kabel Kuasa
• Lamp Penutup
• Manual Arahan

4. Ciri-ciri Produk

• Power output of 300W for professional studio lighting.
• Compatible with a range of accessories via Bowens Mount.
• Comes with a standard reflector for even light distribution.
• Easy-to-use interface with digital display and remote control options.
• Lightweight and compact design for easy portability and setup.
• Upgraded 10W LED modeling light with 5%-100% manual dimming.
• Built-in Godox 2.4G Wireless X System for remote triggering and control.

5. Produk Lebihview

5.1. Depan View

5.2. Rear Panel and Controls

5.3. Gunung Bowens

6. Persediaan

6.1. Attaching the Standard Reflector

1. Align the three mounting points on the standard reflector with the corresponding slots on the flash unit's Bowens mount.
2. Insert the reflector into the mount and rotate it clockwise until it locks securely into place.

6.2. Sambungan Kuasa

1. Ensure the flash unit is turned OFF.
2. Connect the power cable to the power input on the rear panel of the flash unit.
3. Pasangkan hujung kabel kuasa yang satu lagi ke dalam soket kuasa AC yang sesuai.

6.3. Mounting on a Light Stand

1. Loosen the locking knob on the flash unit's mounting bracket.
2. Slide the flash unit onto the top stud of a sturdy light stand.
3. Tighten the locking knob to secure the flash unit in position.
4. Adjust the tilt angle of the flash unit using the tilt adjustment handle.

7. Arahan Operasi

7.1. Hidupkan/Mati Kuasa

Flip the ON/OFF switch on the rear panel to turn the flash unit on or off.

7.2. Adjusting Flash Power

1. Putar SET dial to adjust the flash power output. The power can be adjusted from 1/16 to 1/1.
2. The LCD screen will display the current power setting.

7.3. Pemodelan Lamp Kawalan

Tekan pendek MOD/OFF button to cycle through the modeling lamp modes: OFF, PROP (proportional to flash power), and Percentage (5%-100% manual dimming). Rotate the SET knob to adjust brightness in Percentagmod e.

7.4. Kawalan Tanpa Wayar (Sistem 2.4GX)

The SK300IIV features a built-in Godox 2.4G Wireless X System for remote control. To use this function:

1. Tekan serentak GR/CH tombol dan S1/S2 knob to turn on the built-in 2.4G wireless transmission system mode.
2. Tekan pendek GR/CH knob to set the group (A-F) for the flash.
3. Putar SET knob to select the desired group and press SET untuk mengesahkan.
4. Tekan pendek GR/CH knob again to set the channel (1-32).
5. Putar SET knob to select the desired channel and press SET untuk mengesahkan.
6. Ensure your Godox X1, X2, XPro, or XT16 flash trigger is set to the same group and channel, and that the ID option is off.

7.5. Sync Modes (S1/S2)

Tekan ke S1/S2 button to toggle between S1 and S2 optical slave modes. These modes allow the flash to be triggered by another flash unit.

7.6. Ujian Flash

Tekan ke UJIAN button to manually fire a test flash.

8. Penyelenggaraan

• Bersihkan peranti dengan kerap menggunakan kain lembut dan kering.
• Avoid using solvents or harsh chemicals.
• Store the unit in a dry, well-ventilated area when not in use.
• Protect the flash tube and modeling lamp from impact.

9. Penyelesaian masalah

• Denyar tidak menyala: Check power connection, ensure the unit is ON, verify trigger settings (channel/group), and test the flash manually.
• Output denyar tidak konsisten: Ensure stable power supply, check for overheating (allow cooling time), and verify power settings.
• Pemodelan lamp tidak bekerja: Check if the modeling lamp mode is set to OFF. If the lamp is burnt out, it may need replacement by a qualified technician.
• Wireless trigger issues: Confirm the trigger and flash unit are on the same channel and group. Check battery levels of the trigger.

10. Spesifikasi

11. Waranti dan Sokongan

This product is covered by a manufacturer's warranty against defects in materials and workmanship. For detailed warranty information, please refer to the warranty card included in your package or contact Godox customer support. Technical support and service are available through authorized dealers and the official Godox webtapak.