1. Pengenalan
This manual provides detailed instructions for the installation, maintenance, and troubleshooting of your APS F75196K 2.5mm Wire Mesh Grille Insert. This product is designed to fit specific Ford F-250 and F-350 models. Please read all instructions carefully before proceeding with installation.
Keserasian Produk:
- Ford F-250 (2020-2022) King Ranch/Platinum
- Ford F-350 (2020-2022) King Ranch/Platinum
This grille insert is specifically designed for the main upper grille section of the compatible vehicles.
2. Maklumat Keselamatan
Always prioritize safety during installation. Failure to follow safety precautions may result in injury or damage to your vehicle.
- Pakai peralatan pelindung diri yang sesuai, termasuk cermin mata keselamatan dan sarung tangan.
- Ensure the vehicle is parked on a level surface with the engine off and parking brake engaged.
- Allow the engine to cool completely before working on the front of the vehicle.
- If you are unsure about any step, consult a professional mechanic.
- Jauhkan semua bahagian kecil dan alatan daripada kanak-kanak.
3. Kandungan Pakej
Sahkan bahawa semua komponen ada dan tidak rosak sebelum memulakan pemasangan.
- APS F75196K 2.5mm Wire Mesh Grille Insert (4 pieces for main upper grille)
- Mounting Hardware (bolts, nuts, washers as required)
- Manual Pengguna (dokumen ini)
Note: The original equipment (OE) grille shell, vehicle logo, or emblem is not included with this product.
Image: Individual components of the APS F75196K grille insert, including the four mesh sections and associated mounting hardware.
4. Arahan Pemasangan
The APS F75196K grille insert is designed for a bolt-over/overlay installation. Drilling is not required, and the original equipment (OE) grille shell remains on the vehicle after installation.
Alat Diperlukan (Tidak Termasuk):
- Set Kunci Soket
- Set pemutar skru
- Protective Eyewear and Gloves
Langkah Pemasangan:
- Sediakan Kenderaan: Park your Ford F-250 or F-350 on a flat, stable surface. Turn off the engine and engage the parking brake. Allow the engine and surrounding components to cool.
- Clean the Grille Area: Thoroughly clean the existing OE grille shell to ensure proper adhesion and a clean installation.
- Position the Grille Inserts: Carefully align each of the four mesh grille insert pieces with the corresponding sections of your vehicle's main upper grille. Ensure a snug fit.
- Secure the Inserts: Using the provided mounting hardware (bolts, nuts, washers), secure each grille insert piece to the OE grille shell. Tighten all fasteners evenly to prevent warping or misalignment. Do not overtighten.
- Pemeriksaan Akhir: Once all pieces are securely installed, perform a final visual inspection to ensure proper fitment and that all hardware is tightened. Gently tug on the inserts to confirm they are firmly in place.
Image: Visual comparison showing a vehicle's front grille before and after the installation of a mesh grille insert, highlighting the aesthetic change.
Image: The APS F75196K 2.5mm wire mesh grille insert shown installed on the main upper grille of a compatible Ford F-Series truck.
5. Penyelenggaraan
To ensure the longevity and appearance of your APS grille insert, follow these maintenance guidelines:
- Pembersihan tetap: Bersihkan sisipan gril secara berkala menggunakan sabun automotif yang lembut dan air. Gunakan kain lembut atau span untuk mengelakkan calar pada kemasan bersalut serbuk.
- Elakkan Bahan Kimia Keras: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and material.
- Periksa Pengikat: Periodically check all mounting hardware to ensure it remains tight. Retighten if necessary.
- Keluarkan Serpihan: Regularly remove any accumulated debris (leaves, insects, road grime) from the mesh to maintain airflow and appearance.
Image: A detailed close-up of the 2.5mm wire mesh pattern, illustrating the crimped woven style and glossy black powder-coated finish.
6. Penyelesaian masalah
If you encounter any issues with your APS grille insert, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Grille insert feels loose after installation. | Mounting hardware not sufficiently tightened. | Re-check and tighten all bolts and nuts evenly. Ensure proper alignment before tightening fully. |
| Difficulty aligning inserts. | Incorrect positioning or debris obstructing fit. | Ensure the correct insert piece is being used for each section. Clear any debris from the OE grille shell. |
| Calar atau kerosakan pada kemasan. | Abrasive cleaning materials or impact. | Use only soft cloths and mild soap for cleaning. Avoid contact with sharp objects. Minor scratches may be touched up with appropriate black automotive paint. |
If the problem persists or is not listed here, please contact APS customer support.
7. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | F75196K |
| bahan | Keluli Tahan Karat Premium |
| Jenis Mesh | 2.5 mm Wire Mesh (Crimped Woven Style Diamond) |
| Selesai | Glossy Black Powder Coated |
| Jenis Pemasangan | Bolt Over/Overlay (Drilling Not Required) |
| Jenis Perkhidmatan Kenderaan | Lori |
| Jenis Kesesuaian Automotif | Kesesuaian Khusus Kenderaan |
| Berat Barang | 8.12 paun |
| Dimensi Pakej | 47 x 12 x 5 inci |
Image: A close-up of the back view of the grille insert, highlighting the mounting points and the construction of the 2.5mm wire mesh.
8. Waranti dan Sokongan
Maklumat Waranti:
APS provides a 5-year spare part availability duration for this product, ensuring support for replacement parts if needed within this period.
Sokongan Pelanggan:
For any questions, concerns, or assistance with installation or product issues, please contact APS customer service. Refer to your purchase documentation for specific contact details or visit the official APS webtapak.
We are committed to resolving any problems with professional and sincere service.
