Weiser SmartCode Keypad Electronic Deadbolt Instruction Manual

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your Weiser SmartCode Keypad Electronic Deadbolt. Please read this manual thoroughly before installation and use to ensure proper function and to maximize the security features of your lock. This electronic deadbolt offers keyless entry with a backlit keypad, multiple user codes, and SmartKey re-key technology.

Figure 1: Weiser SmartCode Keypad Electronic Deadbolt (Exterior and Interior Units)

2. Maklumat Keselamatan

• Read all instructions completely before installing and operating the lock.
• Do not attempt to disassemble the lock. This may void the warranty.
• Use only the specified battery type (4 AA alkaline batteries). Do not mix old and new batteries or different types of batteries.
• Keep your user codes and master code confidential.
• Ensure the door frame is secure and the strike plate is properly installed for optimal security.

3. Komponen yang Disertakan

Verify that all parts are present before beginning installation:

Figure 2: Contents of the Box

• Exterior Deadbolt Assembly
• Interior Deadbolt Assembly
• Selak Boleh Laras
• Pukulan Pukulan
• Kolar
• Plat Pemasangan
• Perkakasan Pemasangan (skru)
• 2 Weiser Keys
• Alat SmartKey
• Panduan Pemasangan (manual ini)

4. Persediaan dan Pemasangan

The Weiser SmartCode Keypad Electronic Deadbolt is designed for easy installation. For detailed, interactive 3D instructions with voice and video guidance, it is recommended to use the free BILT app.

4.1 Keserasian Pintu

This deadbolt is compatible with standard doors measuring 1-3/8" to 1-3/4" (35mm to 44mm) thick. It features an adjustable backset for both 2-3/8" (60mm) and 2-3/4" (70mm) settings. It is suitable for most exterior and interior residential doors.

4.2 Langkah Pemasangan (Tamatview)

1. Sediakan Pintu: Ensure your door is properly prepped with the correct bore holes and backset.
2. Pasang Selak: Insert the adjustable latch into the door edge and secure it with screws. Adjust the backset if necessary.
3. Pasang Papan Kekunci Luaran: Route the cable from the exterior keypad through the door and position the keypad on the exterior side.
4. Pasang Plat Pemasangan: Secure the interior mounting plate to the door, connecting it to the exterior keypad.
5. Pasang Perhimpunan Dalaman: Connect the cable from the exterior keypad to the interior assembly. Mount the interior assembly onto the mounting plate and secure it.
6. Pasang Bateri: Insert 4 AA alkaline batteries into the interior assembly.
7. Perform Door Handing Process: This step is crucial for the lock to learn the orientation of your door. Follow the specific instructions in the BILT app or the included quick start guide.

For detailed visual instructions, refer to the BILT app or the comprehensive installation guide included in the packaging.

Figure 3: Suitable Applications for the Deadbolt

5. Arahan Operasi

5.1 Mengunci Pintu

• Penguncian Satu Sentuhan: Press the Lock button (padlock icon) on the keypad. The deadbolt will extend, securing the door.
• Ciri Auto-Kunci: The lock can be programmed to automatically re-lock after a set period (e.g., 30 seconds) after unlocking. Refer to the programming section for details on enabling/disabling this feature.

Figure 4: One-Touch Auto-Lock in Action

5.2 Membuka Kunci Pintu

• Menggunakan Kod Pengguna: Enter your personalized 4-8 digit user code on the keypad. The deadbolt will retract, unlocking the door.
• Menggunakan Kunci: Insert the physical key into the keyway and turn to unlock.

Figure 5: Keyless Entry via Keypad

5.3 Keypad Features

• Pad Kekunci Berlampu Belakang: The keypad illuminates for increased visibility in low-light conditions and remains lit for 30 seconds after inactivity.

Figure 6: Backlit Keypad for Low Light Conditions

5.4 Kod Pengguna Pengaturcaraan

The lock supports up to 50 unique user access codes and one master code. The master code is used for programming and managing user codes.

Figure 7: Multiple User Access Codes Feature

Refer to the full programming instructions in the included guide for detailed steps on adding, deleting, and modifying user codes and the master code.

5.5 SmartKey Re-Key Technology

SmartKey Security allows you to re-key your lock yourself in seconds, providing flexibility and control over your keys. This is useful in situations such as moving to a new home, losing keys, or managing multiple doors with a single key.

Figure 8: SmartKey Re-Keying Process

Untuk memasukkan semula kunci anda:

1. Insert your functioning key (the key that currently operates the lock) and turn it 90 degrees clockwise.
2. Insert the SmartKey tool fully into the SmartKey hole.
3. Tanggalkan alat SmartKey.
4. Tanggalkan kunci anda yang berfungsi.
5. Insert your new key fully and turn it 180 degrees counter-clockwise.
6. Remove the new key. The lock is now re-keyed to the new key.

6. Penyelenggaraan

6.1 Penggantian Bateri

The deadbolt operates on 4 AA alkaline batteries. When the batteries are low, the lock will provide an audible and/or visual low battery warning. Replace all four batteries simultaneously with new, high-quality alkaline batteries.

Figure 9: Battery Compartment and 12-Month Battery Life

Expected battery life is approximately 12 months under normal usage conditions.

6.2 Pembersihan

Bersihkan kunci dengan kain lembut,amp kain. Elakkan menggunakan pembersih atau pelarut yang melelas, kerana ini boleh merosakkan kemasan dan komponen elektronik.

7. Penyelesaian masalah

If you encounter issues with your Weiser SmartCode deadbolt, refer to the following common troubleshooting steps:

• Kunci tidak bertindak balas: Periksa tahap bateri dan gantikan jika perlu. Pastikan bateri dimasukkan dengan kekutuban yang betul.
• Papan kekunci tidak menyala: Replace batteries. If the issue persists, contact support.
• Lock not locking/unlocking: Perform the door handing process again. Check for any obstructions in the door frame or latch. Verify user codes are correctly programmed.
• Difficulty re-keying: Ensure the functioning key is fully inserted and turned 90 degrees. Make sure the SmartKey tool is fully inserted into the hole.
• Frequent low battery warnings: Ensure you are using new, high-quality alkaline batteries. Extreme temperatures can affect battery performance.

For more complex issues, consult the full troubleshooting guide available on the Weiser webtapak atau hubungi sokongan pelanggan.

8. Spesifikasi

Rajah 10: Dimensi Produk

9. Maklumat Waranti

This Weiser SmartCode Keypad Electronic Deadbolt comes with a 1-year warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Weiser webtapak.

10. Sokongan

For further assistance, technical support, or to purchase replacement parts, please contact Weiser customer service. Contact information can typically be found on the Weiser webtapak atau dalam bahan pembungkusan.

Anda juga boleh melawat Kedai Weiser di Amazon untuk maklumat dan sumber produk tambahan.