SUNLU PLA Matte 3D Printer Filament User Manual

1. Pengenalan dan Selesai Produkview

The SUNLU PLA Matte 3D Printer Filament is designed to produce prints with a beautiful matte, low-gloss, and smooth finish, effectively concealing layer lines for a frosted texture. This filament is engineered for high precision and consistency, ensuring reliable and high-quality 3D printing.

Smooth Matte Finish: Achieves a frosted texture that hides layer lines.
Neatly Wound: Advanced winding technology prevents knots and tangles, improving printing efficiency.
Dimensional Accuracy & Consistency: Features a dimensional accuracy of +/- 0.02mm, with minimum tolerance and low warping for stable prints and good layer bonding.
No Clogging & No Bubble: Manufactured in a dry, dust-free environment and vacuum-sealed to prevent moisture absorption, reducing clogging and bubbling problems.

Figure 1: SUNLU PLA Matte Black Filament Spool with a 3D printed duck, showcasing the matte finish.

Vacuum-sealed filament package and various FDM 3D printers — Figure 2: The filament comes in a vacuum-sealed package and is compatible with most FDM 3D printers.

Produk Selesaiview Video

Video 1: Tamatview of SUNLU 3D Filament, highlighting its features and benefits.

2. Persediaan

2.1 Membongkar dan Penyediaan

Upon receiving your SUNLU PLA Matte filament, ensure the vacuum-sealed packaging is intact. Open the package carefully and remove the filament spool. It is recommended to store unused filament in its sealed bag with desiccant to prevent moisture absorption.

2.2 Spool Installation (Reusable Spool)

Some SUNLU filaments come with a reusable spool design. To install, find the 'Line 1', 'unlock', and 'lock' marks on the spool. Align the marks to unlock, install the filament, and then turn 'Line 1' to 'lock' to secure it.

Diagram showing how to use the SUNLU reusable spool — Figure 3: Step-by-step guide for installing filament on a SUNLU reusable spool.

2.3 Printer Compatibility

SUNLU PLA Matte filament is designed to be compatible with most FDM 3D printers. Ensure your printer's filament holder can accommodate a spool diameter of 8.00 inches, a spool width of 2.50 inches, and a spool hub hole diameter of 2.20 inches.

3. Arahan Operasi

3.1 Tetapan Cetakan yang Disyorkan

For optimal results with SUNLU PLA Matte filament, the following settings are recommended:

Suhu muncung: 200-230°C
Bed Temperature: 50-65°C
Kelajuan Mencetak: 50-100mm/s

Recommended printing settings for SUNLU PLA filament — Figure 4: Visual representation of recommended print settings.

3.2 Pemuatan dan Pembongkaran Filamen

Follow your 3D printer's specific instructions for loading and unloading filament. Ensure the filament is fed smoothly into the extruder without kinks or excessive force. When unloading, heat the nozzle to the recommended temperature before carefully pulling the filament out.

3.3 Print Quality and Characteristics

SUNLU PLA Matte filament is known for its smooth matte finish, excellent layer adhesion, and minimal stringing. The precise dimensional accuracy contributes to stable and consistent prints.

Comparison of matte PLA print vs. glossy PLA print — Figure 5: A comparison showing the superior smooth matte finish of SUNLU PLA Matte over glossy PLA.

Caliper measuring filament diameter, indicating dimensional accuracy — Figure 6: The filament maintains consistent diameter for reliable feeding and printing.

Print Quality Examples

Video 2: Demonstrates the matte finish and print quality of SUNLU PLA Matte Pink filament.

Video 3: Shows the smooth finish and print quality of SUNLU PLA Matte Blue filament.

Video 4: Highlights the matte finish and print quality of SUNLU PLA Matte Olive Green filament.

4. Penyelenggaraan

4.1 Filament Storage

To maintain filament quality and prevent moisture absorption, always store unused filament in its original vacuum-sealed bag with the included desiccant. Keep in a cool, dry place away from direct sunlight.

4.2 Dealing with Knotted Filament

In rare cases, filament may become knotted. If you encounter a knot, carefully unspool the affected section and smooth out any twists or tangles before re-spooling. Always ensure the filament end is secured in the spool's wire hole when not in use to prevent tangling.

Video 5: Instructions on how to deal with knotted filament and re-spool correctly.

5. Penyelesaian masalah

5.1 Isu Percetakan Biasa

Isu	Kemungkinan Punca	Penyelesaian
Tersumbat	Incorrect temperature, dust/debris, moisture absorption.	Adjust nozzle temperature, clean nozzle, dry filament.
Mengikat	High nozzle temperature, incorrect retraction settings.	Lower nozzle temperature, optimize retraction distance/speed.
Poor Adhesion	Dirty print bed, incorrect bed temperature, improper bed leveling.	Clean print bed, adjust bed temperature (50-65°C), re-level bed.
Meleding	Insufficient bed temperature, drafts, large prints.	Increase bed temperature, use enclosure, add brim/raft.

6. Spesifikasi

Jenama: SUNLU
Bahan: Asid Polilaktik (PLA)
warna: 1000g Pla Black (Current Product)
Berat Barang: 2.2 paun (1 Kilogram)
Dimensi Produk: 7.87 x 2.56 x 7.87 inci
Diameter Item: 1.75 Milimeter
Dimensional Accuracy: +/- 0.02mm
Spool Diameter: 8.00 inci
Spool Width: 2.50 inci
Spool Hub Hole Diameter: 2.20 inci
Nombor Bahagian Pengilang: FR-PLAYG-BK-1KG
Tarikh Mula-mula Tersedia: 16 September 2022

7. Waranti dan Sokongan

This product is covered by a 30-day return policy for refund or replacement. For further support, please visit the official SUNLU Store on Amazon or contact their customer service.

Official SUNLU Store: SUNLU Store

	SUNLU FilaDryer S2: Manual Pengguna dan Panduan untuk Pengeringan Filamen Manual pengguna yang komprehensif untuk SUNLU FilaDryer S2, memperincikan persediaan, operasi, tetapan diperibadikan, penyelesaian masalah dan petua untuk pengeringan filamen pencetakan 3D yang optimum. Ketahui cara mengeringkan PLA, PETG, ABS dan banyak lagi.
	Panduan Pengguna SUNLU FilaDryer S4 untuk Filamen Pencetakan 3D Panduan pengguna rasmi untuk SUNLU FilaDryer S4, peranti yang direka untuk mengeringkan dan menyimpan filamen pencetakan 3D, memastikan kualiti cetakan optimum. Ketahui tentang persediaan, pengendalian dan penyelenggaraan.
	Panduan Pengguna SUNLU FilaDryer S4 - Pengering Filamen Cetakan 3D Panduan pengguna yang komprehensif untuk SUNLU FilaDryer S4, pengering filamen cetakan 3D. Ketahui tentang persediaan, pengendalian, penyelesaian masalah dan suhu pengeringan yang disyorkan untuk pelbagai jenis filamen.
	Panduan Pengguna SUNLU FilaDryer S4: Optimumkan Filamen Percetakan 3D Anda Panduan pengguna yang komprehensif untuk SUNLU FilaDryer S4. Ketahui cara mengeringkan filamen percetakan 3D anda dengan selamat dan berkesan untuk hasil yang optimum, termasuk persediaan, operasi dan penyelesaian masalah.
	Panduan Pengguna SUNLU FilaDryer S2 - Pengeringan dan Penyimpanan Filamen Panduan pengguna yang komprehensif untuk SUNLU FilaDryer S2, memperincikan ciri-cirinya untuk mengeringkan dan menyimpan filamen pencetakan 3D. Termasuk arahan persediaan, operasi dan penyelenggaraan.
	SUNLU Filament Connector FC01 Usage Instructions User guide for the SUNLU Filament Connector FC01, detailing its parts, specifications, troubleshooting, and step-by-step instructions for fusing 3D printer filament.

SUNLU FR-PLAYG-BK-1KG